American Standard Evolution 2771V.002 User manual

H93
© 2008 AS America Inc. Revised 4/06
Components Required:
❏ Bath Filler*: (specify nish)
❏ Bath Drain: 1599.205.XXX (specify color)
Custom Accessories Available:
❏ Safe-T-Heater Whirlpool Heater: 9075.120
❏ 5 Foot Apron: 9261.019.XXX (specify color)
❏ Tile Bead Kit: 751755-100
For color/nish availability and other faucet choices, please
see the Product Selector and Pricing Guide.
NOTE: Whirlpool Heater is designed to maintain water
temperature during operation. It will not heat cold water to
desired bathing temperature.
SEE REVERSE FOR ROUGHING-IN DIMENSIONS
AND PRODUCT SPECIFICATIONS
EVOLUTION™ 5' X 36"
Bathing design with form-tted backrest and
molded-in armrests
❏ 2771VC Whirlpool w/EverClean® System
• EverClean® System
• Acrylic with berglass reinforcement
• Deep Soak Overow Drain for maximum
water depth
• 1.4 HP self-draining pump/motor
• Eight ow adjustable jets including:
- Two adjustable Ideal Flow Comfort Jets™
- Six adjustable Comfort Jets™
• Two silent air volume controls
• Side-mounted On/Off control
• Complete factory installed and tested
whirlpool system
• Self leveling feet
• Undermount installation option
• Quick connect E-Z-Install™ heater system
(must order E-Z-Install™ heater separately)
❏ 2771V Whirlpool
• Same as above without EverClean® System
❏ 2771V.002 Bathing Pool
Nominal Dimensions:
60" x 36" x 21-1/2"
(1524 x 914 x 546mm)
Compliance Certications -
Meets or Exceeds the Following Specications:
• Underwriters Laboratories - Hydromassage
Bathtubs UL 1795
• ASME A112.19.7M for Whirlpool Appliances
• ANSI Z124.1 for Plastic Bathtubs
• ASTM E162 for Flammability
• NFPA 258 for Smoke Density
American Standard whirlpools with EverClean®
incorporate a patented silver-ion additive right
into the circulation piping to protect the pipes
from mold, mildew, algae and fungus that could
cause deterioration or staining of the pipes.
* See American Standard Faucet Selector
EVOLUTION™ 5' X 36"
WHIRLPOOL AND BATHING POOL
HIGH GLOSS

H94
© 2008 AS America Inc.
EVOLUTION™ 5' X 36"
WHIRLPOOL AND BATHING POOL
HIGH GLOSS
Revised 3/06
NOTES:
BATH CAN BE INSTALLED EITHER ABOVE OR BELOW FLOOR LINE AS PIER, ISLAND, OR PENINSULA TYPE INSTALLATION.
SUPPORT OF BATH BY SUMP BEDDING. SUPPORT AND ENCLOSING MATERIAL BY OTHERS.
REFER TO INSTALLATION INSTRUCTIONS SUPPLIED WITH WHIRLPOOL FOR ADDITIONAL INFORMATION.
■ OPTIONAL 3 WALL TILING BEAD. KIT No. TILE-BEAD AND APRON No. 5FT-APRON AVAILABLE AND MUST BE ORDERED
SEPARATELY.
FITTINGS NOT INCLUDED AND MUST BE ORDERED SEPARATELY.
PROVIDE SUITABLE REINFORCEMENT FOR ALL SUPPORTS.
IMPORTANT: Dimensions of xtures are nominal and may vary within the range of tolerances established by ANSI Standard Z124.1
These measurements are subject to change or cancellation. No responsibility is assumed for use of superseded or voided leaet.
60 x 36 x 21-1/2 In.
(1524mm x 914 mm x 546mm)
75 Lbs. (34 Kg.)
800 Lbs. (363 Kg.)
87 Gal. (329 L.)
50 Gal. (189 L.)
41-1/4 x 26-1/4 In.
(1048mm x 667mm)
52-1/2 x 30 In. (1334mm x 762mm)
18-1/2 In. (470mm)
53 Lbs./Sq. Ft. (260 Kgs/Sq. m.)
GENERAL SPECIFICATIONS FOR 2771V WHIRLPOOL
INSTALLED SIZE
WEIGHT
WEIGHT w/WATER
GAL. TO OVERFLOW
MIN. OPERATING GAL.
BATHING WELL AT SUMP
BATHING WELL AT RIM
WATER DEPTH TO OVERFLOW
FLOOR LOADING
(PROJECTED AREA)
WHIRLPOOL ELECTRICAL SPECIFICATIONS
1.4 HP, 9.7 AMPS, 120V.PUMP
60"
(1524mm)
36"
(914mm)
36"
(914mm)
3"
(76mm)
7-1/2"
(191mm)
6"
(152mm)
11"
(279mm)
13-3/4"
(349mm)
21-1/2"(H)
(546mm)
20"(C)
(508mm)
20-1/8"(A)
(511mm)
DIMENSIONS OF FIXTURES ARE NOMINAL AND MAY VARY WITHIN THE RANGE
OF TOLERANCES ESTABLISHED BY ANSI STANDARDS Z124.1 AND A112.19.7.
C/L OF
OVERFLOW
CUT OUT IN FLOOR
FOR DRAIN
3-1/4"
(83mm)
GENERAL SPECIFICATIONS FOR 2771V BATHING POOL
60 x 36 x 21-1/2 (1524 x 914 x 546mm)
60 Lbs. (27 Kg.)
785 Lbs. (356 Kg.)
87 Gal. (329 L.)
41-1/4 x 26-1/4 In. (1048 x 667mm)
52-1/2 x 30 In. (1334 x 762mm)
18-1/2 (470mm)
52 Lbs./Sq.Ft. (255 Kgs./Sq.m)
INSTALLED SIZE
WEIGHT
WEIGHT w/WATER
GAL. TO OVERFLOW
BATHING WELL AT SUMP
BATHING WELL AT RIM
WATER DEPTH TO OVERFLOW
FLOOR LOADING
(PROJECTED AREA)