American Standard Studio S T105900 User manual

- 1 -
Product names listed herein are trademarks of AS America, Inc.
© AS America, Inc. 2018
Thank you for selecting American Standard...
the benchmark of fine quality for over 140 years.
To ensure that your installation proceeds smoothly-please read
these instructions carefully before you begin.
RECOMMENDED TOOLS
ROUGHING-IN DIMENSIONS
1
INSTALL SPOUT
STUDIO®S
DECK MOUNT BATH FILLER
INSTALLATION
INSTRUCTIONS
T105900
T105901
Certied to comply with ANSI A112.18.1M
CAUTION Turn off hot and cold water
supplies before begining.
M965957 (7/18)
12" MIN.
(305 mm)
1" MAX.
(25 mm)
4-5/8"
(118 mm)
2-1/2"
(64 mm)
2-15/16"
(74 mm)
4-3/4"
(120 mm)
5-11/16"
(145 mm)
7-13/16"
(199 mm)
9-7/16"
(240 mm)
12"
(306 mm)
Adjustable Wrench
Channel Locks
Flat Blade Screwdriver
Phillips Screwdriver
Hex Wench
(supplied)
Hex wench
(supplied)
RECESS
1
3
2
MOUNTING
SURFACE
4
3
•Thread DIVERTER INSERT (5) carefullyit touches the
installation surface, be sure the RUBBER RING (4)
is properly seated in it’s RECESS at the base of the
SPOUT (1).
•Thread SET SCREW (3) using 5 mm hex wrench supplied.
Make certain SET SCREW (3) is properly aligned and tight
so that SPOUT (1) is locked in place.
•Install PLUG BUTTON (2).

- 2 -
FITTING
MOUNTING
DECK
SPOUT
SHANK
HOT
COLD
2
4
6
5
VALVE
LOCKING
VALVE
LOCKING
1
3
M965957 (7/18)
2VALVE ASSEMBLY
INSTALL HANDLES
3
• Turn VALVE to OFF position.
• Push ADAPTER (1) on VALVE STEM (2), so that the hole of the ADAPTER (1) without a spline is facing up. Fig. A.
Tighten STEM SCREW (3) to secure ADAPTER (1).
• Align DECK ADAPTER (5) to LEVER HANDLE ASSEMBLY (4). Push LEVER HANDLE
ASSEMBLY (4) onto DECK ADAPTER (5) rmly to ush against mounting surface.
1
4
TOP
SPLINE END DOWN
Fig. A.
FEMALE TEETH
2
3
5
MALE TEETH
• Remove PLASTER GUARDS.
• Thread INSERT (1) into SIDE VALVE (2) until it touches
the installation surface.
• Thread INSERT (3) into SIDE VALVE (4) until it touches
the installation surface.
• Tighten COUPLING (5) into TEE (6) for products
without hand shower.

- 3 -
CARE INSTRUCTIONS:
M965957 (7/18)
DO: SIMPLY RINSE THE PRODUCT CLEAN WITH CLEAR WATER. DRY WITH A SOFT COTTON FLANNEL CLOTH.
DO NOT: DO NOT CLEAN THE PRODUCT WITH SOAPS, ACID, POLISH, ABRASIVES, HARSH CLEANERS, OR A CLOTH
WITH A COARSE SURFACE.
5
4
12
3
8
9
9
11
4
LOCKNUT
6
5
7
10
12
HANDSHOWER INSTALLATION
When not in use, HANDSHOWER should be
seated in the HOLDER.
NOTE
• Drop SPRAY ESCUTCHEON (1) through the fourth hole of the tub ledge (12"max from
SPOUT center) with SPRAY ESCUTCHEON (1) directed towards tub center. Be sure
RUBBER RING (2) is properly seated in ESCUTCHEON (1). Install RUBBER WASHER
(3) and LOCKNUT (4) from underside of ledge.
• Secure SPRAY ESCUTCHEON (1) by tightening LOCKNUT (4).
• Add SEAL WASHER (5) and connect HOSE (10) to outlet nipple at the bottom
of TEE (7). Tighten rmly.
• Slip SHOWER HOSE (8) with COUPLING NUT through SPRAY HOLDER (6)
and ESCUTCHEON (1). (Note: SPRAY HOLDER (6) must be separate from
ESCUTCHEON (1) to get HOSE (8) through ESCUTCHEON (1).) Install SEAL (9)
and CHECK VALVE (12) before connecting both HOSES (8) and (10).
INSTALL second SEAL (9) and connect HAND SHOWER (11) to SPRAY HOSE (8).

- 4 -
033760-0070A
HAND SHOWER
SEAL KIT
028667-0020A
HAND SHOWER HOSE
918555-0070A
HANDLE SCREW
M918068-0070A
HANDLE ADAPTER
M970478-0070A
SHANK KIT
M970479-0070A
SHANK
MOUNTING KIT
M950535-0070A
VALVE KIT
M970549-YYY0A
LEVER HANDLE
M911116-0070A
SPACER VALVE
M910270-0070A
AERATOR
M970550-YYY0A
ESCUTCHEON
M970090-YYY0A
HAND SHOWER
HOLDER
1660609.YYY
HAND SHOWER
M911705-0070A
SEAL SPOUT
M970261-0070A
SPOUT SCREW
030278-0070A
TRANSFER
SEAL KIT
M970507-0070A
TRANSFER
ROD ASSEMBLY
(T353901)
M970477-0070A
SHANK SLEEVE KIT
(T353901)
- 4 - M965957 (7/18)
Replace the “YYY” with
appropriate finish code
POLISHED CHROME 002
MATTE BLACK 243
BRUSHED NICKEL 295
STUDIO®S
DECK MOUNT
BATH FILLER
MODEL NUMBERS
T105900
T105901
HOT LINE FOR HELP
For toll-free information and answers to your questions, call:
1 [phone]
Mon. - Fri. 8:00 a.m. to 8:00 p.m. EST
Saturday 10:00 a.m. to 4:00 p.m. EST
IN CANADA 1-800-387-0369
(TORONTO 1-905-306-1093)
Weekdays 8:00 a.m. to 7:00 p.m. EST
IN MEXICO 01-800-839-1200