American Standard Berwick Series User manual

- 1 -
Product names listed herein are trademarks of AS America, Inc.
© AS America, Inc. 2018
Thank you for selecting American Standard...
the benchmark of fine quality for over 140 years.
To ensure that your installation proceeds smoothly-please read
these instructions carefully before you begin.
RECOMMENDED TOOLS
ROUGHING-IN DIMENSIONS
1
INSTALL SPOUT
Berwick™ / Boulevard®
Roman Tub Filler
INSTALLATION
INSTRUCTIONS
T430900
T430901
T431900
T431901
Certied to comply with ANSI A112.18.1M
CAUTION Turn off hot and cold water
supplies before begining.
M965953 (8/18)
1" MAX.
(25 mm)
70mm
(2-3/4")
152-305mm
(6"-8")
57mm
(2-1/4")
108mm
(4-1/4")
52mm
(2")
170mm
(6-3/4")
286mm
(11-1/4")
212mm
(8-3/8")
8" TO 16"
FLEXIBLE INSTALLATION
(203 TO 406 mm)
Adjustable Wrench
Channel Locks
Flat Blade Screwdriver
Phillips Screwdriver
Hex Wench
(supplied)
Hex wench
(supplied)
RECESS
34
6
MOUNTING
SURFACE
1
5
2
7
•Apply 4-5 drops of THREADLOCKER (1)
on DIVERTER INSERT (2) threads (supplied).
NOTE: If installing on nished deck, install DIVERTER
INSERT (2) through WASHER (7).
•Thread DIVERTER INSERT (2) carefully until it touches the
installation surface, be sure the RUBBER RING (5)
is properly seated in it’s RECESS at the base of the
SPOUT (3).
•Thread SET SCREW (4) using 5 mm hex wrench supplied.
Make certain SET SCREW (4) is properly aligned and tight
so that SPOUT (3) is locked in place.
•Install PLUG BUTTON (6).

- 2 -
FITTING
MOUNTING
DECK
1
3
SPOUT
SHANK
HOT
COLD
2
4
6
5
VALVE
LOCKING
VALVE
LOCKING
M965953 (8/18)
2VALVE ASSEMBLY
INSTALL HANDLES
3
• Turn VALVE to OFF position.
• Push ADAPTER (1) on VALVE STEM (2), so that the hole of the ADAPTER (1) without a spline is facing up. Fig. A.
Tighten STEM SCREW (3) to secure ADAPTER (1).
• Align DECK ADAPTER (5) to LEVER HANDLE ASSEMBLY (4). Push LEVER HANDLE
ASSEMBLY (4) onto DECK ADAPTER (5) rmly to ush against mounting surface.
1
4
TOP
SPLINE END DOWN
Fig. A.
FEMALE TEETH
2
3
5
MALE TEETH
• Remove PLASTER GUARDS.
• Thread INSERT (1) into SIDE VALVE (2) until it touches the
installation surface.
• Thread INSERT (3) into SIDE VALVE (4) until it touches the
installation surface.
• Tighten COUPLING (5) into TEE (6) for products without
hand shower.

- 3 -
CARE INSTRUCTIONS:
M965953 (8/18)
DO: SIMPLY RINSE THE PRODUCT CLEAN WITH CLEAR WATER. DRY WITH A SOFT COTTON FLANNEL CLOTH.
DO NOT: DO NOT CLEAN THE PRODUCT WITH SOAPS, ACID, POLISH, ABRASIVES, HARSH CLEANERS, OR A CLOTH
WITH A COARSE SURFACE.
6
4
2
3
5
6
8
7
1
7
9
4
HANDSHOWER INSTALLATION (FOR MODEL T430901 & T431901 ONLY)
• Drop SPRAY ESCUTCHEON (1) through the fourth hole of the tub ledge (12”max from
SPOUT center) with SPRAY ESCUTCHEON (1) directed towards tub center. Be sure
RUBBER RING (2) is properly seated in ESCUTCHEON (1).
• Add SEAL WASHER (3) and connect HOSE (8) to outlet nipple at the bottom
of TEE (5). Tighten rmly.
• Slip SHOWER HOSE (6) with COUPLING NUT through SPRAY HOLDER (4)
and ESCUTCHEON (1). (Note: SPRAY HOLDER (4) must be separate from
ESCUTCHEON (1) to get HOSE (6) through ESCUTCHEON (1). Install SEAL (7)
before connecting both HOSES (6) and (8). INSTALL second SEAL (9) and
connect HAND SHOWER (9) to SPRAY HOSE (6).
NOTE: When not in use, HAND SHOWER should
be seated in the HOLDER.

- 4 -
617852-0070A
HANDLE ADAPTER
M962849-0070A
STREAM STRAIGHTENER
M962831-YYY0A
LEFT LEVER
HANDLE ASSEMBLY
M962832-YYY0A
RIGHT LEVER
HANDLE ASSEMBLY
M911705-0070A
RUBBER RING
M917161-0070A
SET SCREW
M970498-YYY0A
HAND SHOWER
HOLDER
028667-YYY0A
HAND SHOWER HOSE
M962850-YYY0A
BUTTON AND SCREW
A950646-YYY0A
HAND SHOWER
918555-0070A
HANDLE SCREW
M962575-YYY0A
TRANSFER KNOB
(T43X901)
M970478-0070A
SHANK KIT
M970479-0070A
SHANK
MOUNTING KIT
M970591-0070A
VALVE ADAPTER KIT
033760-0070A
HAND SHOWER
SEAL KIT
FOR T43X901 ONLY
M970508-0070A
TRANSFER
ASSEMBLY
(T43X901)
- 4 - M965953 (8/18)
Replace the “YYY” with
appropriate finish code
POLISHED CHROME 002
BRUSHED NICKEL 295
Berwick™ / Boulevard®
Roman Tub Filler
MODEL NUMBER
T430900
T430901
T431900
T431901
HOT LINE FOR HELP
For toll-free information and answers to your questions, call:
1 [phone]
Mon. - Fri. 8:00 a.m. to 8:00 p.m. EST
Saturday 10:00 a.m. to 4:00 p.m. EST
IN CANADA 1-800-387-0369
(TORONTO 1-905-306-1093)
Weekdays 8:00 a.m. to 7:00 p.m. EST
IN MEXICO 01-800-839-1200