American Standard Hamilton 4040S User manual

HD-75
© 2008 AS America, Inc.
HAMILTON
TWO-HANDLE KITCHEN FAUCET
4040S Shown.
MODEL NUMBER:
4040S Kitchen Faucet
Metal Lever Handles. Separate Handspray.
Satin Nickel (PVD) finish.
PRODUCT FEATURES:
Ceramic Disc Valve Cartridges: Assures a lifetime of
smooth handle opertion and drip-free performance.
Cast Brass Waterways with: Strong and durable.
Integral tabs on casting provide a wobble-free installation.
Low Lead: Meets NSF Standard 61/Section 9 & Prop 65
lead requirements.
Simple Installation: Fast and easy one person
installation. Faucet drops in from top. Quick spin nuts secure
faucet in place.
Choice of Finishes: Lifetime finishes won't tarnish
or scratch.
Lifetime Warranty: On function and finish.
4040S
Product
Number Description
Kitchen faucet. Metal Lever handles. Separate Handspray. Satin Nickel (PVD) finish.
GENERAL DESCRIPTION:
Kitchen faucet on 8" centers. 1/4 turn washerless ceramic
disc valve cartridges - reversible for use on either "hot" or
"cold" side. Durable cast brass waterway with 1/2" male inlet
shanks. 8-3/8 (212mm) long cast brass swivel spout. Metal
escutcheon plate (escutcheon size 10-7/16"L x 2-7/16"W).
2.2gpm/8.3L/min. maximum flow rate. Metal lever handles.
SUGGESTED SPECIFICATION:
Two handle kitchen faucet shall feature a cast brass waterway and cast brass swivel spout. Shall also feature 1/4 turn
washerless ceramic disc valve cartridges that are reversible for use on either "hot" or "cold" side. Fitting shall be American
Standard Model # 4040S.
Meets the American Disabilities Act Guidelines and ANSI
A117.1 Requirements for the physically challenged.
FLOW RATE*
GALLONS PER MINUTE
INLET PRESSURE (PSI)
*Flow rates shown are for mixed hot and cold.
0.0
0.5
1.0
1.5
2.0
2.5
3.0
10080604020
CODES AND STANDARDS
These products meet or exceed the following
codes and standards:
ASME A112.18.1
CSA B 125
NSF 61/Section 9
ANSI A117.1
8-3/8
(212mm)
2-1/2
(64mm)
8
(203mm)
1-7/8
(49mm)
1 MAX.
(25mm)
2-7/16
(63mm)
7-1/8
(181mm)
4-1/4
(107mm)

HD-76
© 2008 AS America, Inc.
HAMILTON
TWO-HANDLE KITCHEN FAUCET
4040S Shown.
MODEL NUMBER:
4040S Kitchen Faucet
Metal Lever Handles. Separate Handspray.
Satin Nickel (PVD) finish.
PRODUCT FEATURES:
Ceramic Disc Valve Cartridges: Assures a lifetime of
smooth handle opertion and drip-free performance.
Cast Brass Waterways with: Strong and durable.
Integral tabs on casting provide a wobble-free installation.
Low Lead: Meets NSF Standard 61/Section 9 & Prop 65
lead requirements.
Simple Installation: Fast and easy one person
installation. Faucet drops in from top. Quick spin nuts secure
faucet in place.
Choice of Finishes: Lifetime finishes won't tarnish
or scratch.
Lifetime Warranty: On function and finish.
4040S
Product
Number Description
Kitchen faucet. Metal Lever handles. Separate Handspray. Satin Nickel (PVD) finish.
GENERAL DESCRIPTION:
Kitchen faucet on 8" centers. 1/4 turn washerless ceramic
disc valve cartridges - reversible for use on either "hot" or
"cold" side. Durable cast brass waterway with 1/2" male inlet
shanks. 8-3/8 (212mm) long cast brass swivel spout. Metal
escutcheon plate (escutcheon size 10-7/16"L x 2-7/16"W).
2.2gpm/8.3L/min. maximum flow rate. Metal lever handles.
SUGGESTED SPECIFICATION:
Two handle kitchen faucet shall feature a cast brass waterway and cast brass swivel spout. Shall also feature 1/4 turn
washerless ceramic disc valve cartridges that are reversible for use on either "hot" or "cold" side. Fitting shall be American
Standard Model # 4040S.
Meets the American Disabilities Act Guidelines and ANSI
A117.1 Requirements for the physically challenged.
FLOW RATE*
GALLONS PER MINUTE
INLET PRESSURE (PSI)
*Flow rates shown are for mixed hot and cold.
0.0
0.5
1.0
1.5
2.0
2.5
3.0
10080604020
CODES AND STANDARDS
These products meet or exceed the following
codes and standards:
ASME A112.18.1
CSA B 125
NSF 61/Section 9
ANSI A117.1
8-3/8
(212mm)
2-1/2
(64mm)
8
(203mm)
1-7/8
(49mm)
1 MAX.
(25mm)
2-7/16
(63mm)
7-1/8
(181mm)
4-1/4
(107mm)