American Standard Hampton 2770.732 User manual

BAR SINK FAUCETS
Installation
Instructions
Certified to comply with ANSI A112.18.1M
U.S. Patent No. 5,819,789
2770.732
2770.732F15
021470-YYY0A
INDEX CAP
021470-YYY0A
INDEX CAP
918428-0070A
HANDLE SCREW
065800-0070A
LOCKNUT
024220-0070A
SUPPLY NUT
M923049-0070A
PUTTY PLATE
918428-0070A
HANDLE SCREW
907016-YYY0A
ESCUTCHEON
M968945 REV 1.5
Thank you for selecting American-Standard...
the benchmark of fine quality for over 100 years.
To ensure that your installation proceeds smoothly--
please read these instructions carefully before you begin.
For toll-free information and answers to your questions, call:
1-800 442-1902
Weekdays 8:00 a.m. to 6:00 p.m. EST
IN CANADA 1-800-387-0369 (TORONTO 1-905-306-1093)
Weekdays 8:00 a.m. to 7:00 p.m. EST
IN MEXICO 01-800-839-12-00
Product names listed herein are trademarks of American Standard Inc.
© AS America, Inc. 2008
HOT LINE FOR HELP
012470-YYY0A
END CAP
060354-YYY0A
METAL LEVER HANDLE
916503-YYY0A
HANDLE BASE
923002-0070A
HANDLE ADAPTER
908501-YYY0A
HANDLE BASE
028610-0070A
VALVE
042692-0070A
PORCELAIN CROSS
HANDLE
060353-YYY0A
PORCELAIN LEVER HANDLE
923012-0070A
SPOUT CLIP
073542-0070A
SPOUT O-RING
Replace the "YYY" with
appropriate finish code
CHROME
OIL RUBBED BRONZE
SATIN NICKEL (PVD)
002
224
295
®
060477-YYY220A (2.2 GPM)
SPOUT KIT
060477-YYY150A (1.5 GPM)
SPOUT KIT
066070-YYY0A
(2.2 GPM) AERATOR
M922881-YYY0A
(1.5 GPM) AERATOR

TEST INSTALLED FAUCET
2
Remove AERATOR.
With handles in OFF position, turn on water supplies and check all connections for leaks.
Operate both handles to flush water lines thoroughly.
Turn handles into OFF position and replace AERATOR.
1INSTALL FAUCET
Turn off hot and cold water supplies before beginning.
CAUTION
Place faucet in position on sink.
Assemble and tighten LOCKNUTS from underside of SINK.
Connect the HOT water supply to the left SHANK and the
COLD water supply to the right SHANK using appropriate
connectors and sealant (not supplied), and COUPLING NUTS.
LOCKNUT
HOT
COLD
COUPLING NUT
PUTTY
PLATE
BODY
SINK
SHANK
NOT SUPPLIED
Check alignment, if not satisfactory
aligned;
Push out ADAPTER carefully.
Turn ADAPTER either 45˚ or 90˚
so that male square on
ADAPTER catches different
female square in HANDLE BASE.
Assemble and tighten
MOUNTING SCREW.
Push INDEX CAP in top of
HANDLE.
SERVICE Handle alignment.
3
To change direction of handle rotation,
proceed as follows:
AERATOR may accumulate dirt causing distorted and reduced
water flow. Remove AERATOR and rinse clean.
If spout drips, operate handles several times from OFF to ON
position. Do not force - handles turn only 90°.
SPRING
CLIP
STOP
WASHER
90°
Turn valve to OFF position.
Pull out INDEX CAP and remove
HANDLE SCREW.
Pull off HANDLE BASE and remove
ADAPTER.
Remove SPRING CLIP.
Lift STOP WASHER, turn 90°and replace.
Replace SPRING CLIP.
Reinstall HANDLE.
VALVE
STEM
FEMALE SQUARE
IN HANDLE BASE
HANDLE
ADAPTER
SQUARE
4
M968945 REV 1.5
DO: SIMPLY RINSE THE PRODUCT CLEAN WITH CLEAR WATER. DRY WITH A SOFT COTTON FLANNEL CLOTH.
DO NOT: DO NOT CLEAN THE PRODUCT WITH SOAPS, ACID, POLISH, ABRASIVES, HARSH CLEANERS, OR A
CLOTH WITH A COARSE SURFACE.
CARE INSTRUCTIONS: