American Standard Heritage/Amarilis Single-Handle Bar/Pantry Sink Faucet... User manual

L61
© 2008 AS America Inc.
GENERAL DESCRIPTION:
Durable brass construction. Amarilis 1/4 trun washerless
ceramic disc valve cartridge. One-half inch male inlet
shank with brass coupling nut and shank nut. Choice of
wrist blade, lever or cross handle. Brass gooseneck swivel
spout. 2.2gpm/8.3L/min. maximum flow rate. For cold or
tempered water.
PRODUCT FEATURES:
Ceramic Disc Valve Cartridge: Assures a lifetime of
drip-free performance.
Brass Construction: Durable - Excellent in high use
applications. Ideal for prolonged contact with water.
Low Lead: Meets NSF Standard 61/Section 9 & Prop 65
lead requirements.
MODEL NUMBER:
7100.241H Pantry/Bar Sink Faucet
Gooseneck swivel spout. Metal Lever handle.
7100.251H Pantry/Bar Sink Faucet
Gooseneck swivel spout. Metal Cross handle.
7100.271H Pantry/Bar Sink Faucet
Gooseneck swivel spout. Brass wrist
blade handle.
SUGGESTED SPECIFICATION:
Single handle pantry/bar sink faucet shall feature cast brass construction. Shall feature all brass shank nut and coupling nut.
Shall also feature 1/4 turn washerless ceramic disc valve cartridge. Faucet shall be American Standard Model # 7100.____.___.
7100.271H Shown
7100.241H
Product
Number Description
Pantry/Bar faucet. Metal Lever handle.
Finish
7100.251H Pantry/Bar faucet. Metal Cross handle.
7100.271H Pantry/Bar faucet. Brass Wrist Blade handle.
Polished
Chrome
PVD
Satin
Nickel
295
PVD
Stainless
Steel
002
127mm
(5) 337mm
(13-1/4)
238mm
(9-3/8)
22mm
(7/8)
DIA.
44mm
(1-3/4)DIA.
35mm
(1-3/8)MAX.
FOR GROUND JOINT
OR 1/2" O.D. SLIP
CONNECTION
53mm
(2-1/16)
51mm
(2)
Meets the American Disabilities Act Guidelines
and ANSI A117.1 Requirements for the
physically challenged.
FLOW RATE*
GALLONS PER MINUTE
INLET PRESSURE (PSI)
*Flow rates shown are for mixed hot and cold.
0.0
0.5
1.0
1.5
2.0
2.5
3.0
10080604020
CODES AND STANDARDS
These products meet or exceed the following
codes and standards:
ASME A112.18.1M
CSA B 125
NSF 61/Section 9
35mm(1-3/8")
MAX HOLE SIZE
075
N/A = NOT AVAILABLE
N/A
N/A
HERITAGE/AMARILIS
SINGLE-HANDLE PANTRY/BAR SINK FAUCET
WITH BRASS GOOSENECK SPOUT

L62
© 2008 AS America Inc.
HERITAGE/AMARILIS
SINGLE-HANDLE PANTRY/BAR SINK FAUCET
WITH BRASS GOOSENECK SPOUT
GENERAL DESCRIPTION:
Durable brass construction. Amarilis 1/4 trun washerless
ceramic disc valve cartridge. One-half inch male inlet
shank with brass coupling nut and shank nut. Choice of
wrist blade, lever or cross handle. Brass gooseneck swivel
spout. 2.2gpm/8.3L/min. maximum flow rate. For cold or
tempered water.
PRODUCT FEATURES:
Ceramic Disc Valve Cartridge: Assures a lifetime of
drip-free performance.
Brass Construction: Durable - Excellent in high use
applications. Ideal for prolonged contact with water.
Low Lead: Meets NSF Standard 61/Section 9 & Prop 65
lead requirements.
MODEL NUMBER:
7100.241H Pantry/Bar Sink Faucet
Gooseneck swivel spout. Metal Lever handle.
7100.251H Pantry/Bar Sink Faucet
Gooseneck swivel spout. Metal Cross handle.
7100.271H Pantry/Bar Sink Faucet
Gooseneck swivel spout. Brass wrist
blade handle.
SUGGESTED SPECIFICATION:
Single handle pantry/bar sink faucet shall feature cast brass construction. Shall feature all brass shank nut and coupling nut.
Shall also feature 1/4 turn washerless ceramic disc valve cartridge. Faucet shall be American Standard Model # 7100.____.___.
7100.271H Shown
7100.241H
Product
Number Description
Pantry/Bar faucet. Metal Lever handle.
Finish
7100.251H Pantry/Bar faucet. Metal Cross handle.
7100.271H Pantry/Bar faucet. Brass Wrist Blade handle.
Polished
Chrome
PVD
Satin
Nickel
295
PVD
Stainless
Steel
002
127mm
(5) 337mm
(13-1/4)
238mm
(9-3/8)
22mm
(7/8)
DIA.
44mm
(1-3/4)DIA.
35mm
(1-3/8)MAX.
FOR GROUND JOINT
OR 1/2" O.D. SLIP
CONNECTION
53mm
(2-1/16)
51mm
(2)
Meets the American Disabilities Act Guidelines
and ANSI A117.1 Requirements for the
physically challenged.
FLOW RATE*
GALLONS PER MINUTE
INLET PRESSURE (PSI)
*Flow rates shown are for mixed hot and cold.
0.0
0.5
1.0
1.5
2.0
2.5
3.0
10080604020
CODES AND STANDARDS
These products meet or exceed the following
codes and standards:
ASME A112.18.1M
CSA B 125
NSF 61/Section 9
35mm(1-3/8")
MAX HOLE SIZE
075
N/A = NOT AVAILABLE
N/A
N/A