American Standard Savona 0156.008 User manual

J6
© 2008 AS America Inc.
NOTES:
* DIMENSIONS SHOWN FOR LOCATION OF SUPPLIES AND “P" TRAP ARE
SUGGESTED.
▼ PEDESTAL ANCHORING SCREWS NOT INCLUDED.
■ SUITABLE FOR REINFORCEMENT ONLY. ACTUAL DIMENSIONS MUST
BE TAKEN FROM FIXTURE.
FITTINGS NOT INCLUDED AND MUST BE ORDERED SEPARATELY.
PROVIDE SUITABLE REINFORCEMENT FOR ALL WALL SUPPORTS.
INSTALLATION INSTRUCTIONS SUPPLIED WITH LAVATORY.
IMPORTANT: Dimensions of xtures are nominal and may vary within the
range of tolerances established by ANSI Standard A112.19.2.
These measurements are subject to change or cancellation. No responsibility
is assumed for use of superseded or voided pages
FINISHED
WALL
502mm
(19-3/4)
572mm
(22-1/2)
70mm
(2-3/4)
203mm
(8)
140 mm
(5-1/2) REF. 216mm
(8-1/2)
635mm
(25)
35mm
(1-3/8)
864mm
(34)
REF.
C/L
*584mm
(23)
*527mm
(20-3/4)
70mm
(2-3/4)
241mm
(9-1/2)
REF.
PEDESTAL ANCHORING
SCREW HOLES
8mm (5/16) DIA.
PEDESTAL TO
WALL CLEARANCE
203mm
(8)
178mm
(7)
178mm
(7)
197mm
(7-3/4)
1-1/4 O.D.
WASTE
SUPPLIES AS
REQUIRED
1-1/4 O.D.
TAILPIECE
FINISHED
FLOOR
19mm (3/4) DIA.
HOLES FOR
ANCHOR BOLTS
FITTING
DECK
DRAIN
CHASE
OPEN
TO
FLOOR
To Be Specied:
❏ Color: ❏ White ❏ Bone ❏ Linen
❏ Silver ❏ Fawn Beige ❏ Black
❏ Faucet*:
❏ Faucet Finish:
❏ Supplies:
❏ 1-1/4" Trap:
* See faucet section for additional models available
SAVONA™
PEDESTAL SINK
VITREOUS CHINA
SAVONA™ PEDESTAL SINK
• Contemporary-styled basin with raised faucet deck
and backsplash
• Made from vitreous china
• Convenient soap/accessory ledge
• Rear overow
• Design-matched to Savona toilets
• Supplied with mounting kit
• Shown with 3801.432 Jasmine Spread Lavatory
Faucet with Perfume Bottle Handles (not included)
❏ 0156.803 Faucet holes on 8" (203mm) centers
Nominal Dimensions:
635 x 502 x 864mm
(25" x 19-3/4" x 34")
Separate Components:
❏ 0156.008 Pedestal top-8" (203mm) centers
❏ 733900-400 Pedestal only
Bowl sizes:
464mm (18-1/4") wide
324mm (12-3/4") front to back
152mm (6") deep
Compliance Certications -
Meets or Exceeds the Following Specications:
• ASME A112.19.2M for Vitreous China Fixtures
Revised 2/08