American Standard Countertop Lavatory 0293 Series User manual

Adjustable Wrench
Channel Lock Pliers
Regular Screwdriver
Recommended Tools & Materials
1
Phillips Screwdriver
10'
Pipe Wrench
Putty Kinfe
Drill
Saber Saw
Basin Wrench
Plumbers' Putty or
Caulking
Tubing Cutter
Tape
Measure
Hacksaw
730524-100 © American Standard Inc. 2002
NOTE: If replacing an existing lavatory be certain to shut off
water supply before removing old lavatory.
Using the template provided,locate the position of the
lavatory. Provide proper clearance under the counter-
top for the faucet supply lines, drain assembly and the
structural parts of the cabinet.
AMERICAN STANDARD ONE-YEAR LIMITED WARRANTY
If inspection of this American Standard plumbing product, within one year
after its initial installation, confirms that it is defective in materials or workmanship,
American Standard will repair or, at its option, exchange the product for a similar
model.
This limited warranty does not apply to local building code compliance;
since local building codes vary considerably, the purchaser of this product should
check with a local building or plumbing contractor to insure local code compliance
before installation.
This warranty shall be void if the product has been moved from its initial
place of installation; if it has been subjected to faulty maintenance, abuse, misuse,
accident or other damage; if it was not installed in accordance with American
Standard's instructions; or if it has been modified in a manner inconsistent with the
product as shipped by American Standard.
American Standard's option to repair or exchange the product under this
warranty does not cover any labor or other costs of removal or installation, nor
shall American Standard be responsible for any other incidental or
consequential damages attributable to a product defect or to the repair or
exchange of a defective product, all of which are expressly excluded from
this warranty. (Some states or provinces do not allow the exclusion or limitation
of implied warranties, so this exclusion may not apply to you.)
This warranty gives you specific legal rights. You may have other statutory
rights that vary from state to state or from province to province, in which case this
warranty does not affect such statutory rights.
For service under this warranty, it is suggested that a claim be made through
the contractor or dealer from or through whom the product was purchased, or that
a service request (including a description of the product model and of the defect)
be sent to the following address:
In the United States: AMERICAN STANDARD, INC.
P.O. Box 6820
Piscataway, New Jersey 08855
Attn: Director of Consumer Affairs
For residents of the United States, warranty information may also be
obtained by calling the following toll free number: [phone]
In Canada: AMERICAN STANDARD, INC.
2480 Stanfield Road
Mississauga, Ontario Canada L4Y 1S2
Toll Free: [phone] Toronto Area: [phone]
In Mexico: IDEAL STANDARD, S.A. de C.V
Customer Service Manager
Planta Santa Clara,Via Morelos #330
Santa Clara Coatitla
Ecatepec de Morelos 55540,
Estado de Mexico, Mexico
Countertop Lavatory
Installation Instructions
Model 0293 Series
Observe Local Plumbing
and Building Codes
Introduction: Thank you for selecting our products...products which
have been the benchmarks of fine quality for years. To help insure that
the installation process will proceed smoothly, please read these instruc-
tions carefully before you begin. Also, review the recommended tools
and materials list; carefully unpack and examine your new plumbing fixture.
by
COLLECTION
™
“”
THE

3
Drill a clearance hole
inside the perimeter
line of the template.
2
Mount the faucet and drain
assembly (not included) on
the lavatory following faucet
manufacturer's instructions.
Be certain to apply a bead of
sealing putty on the underside
of the drain (Part "A") in order
to ensure a watertight seal
between the lavatory and
drain. Remove excess putty
after installing drain on
lavatory.
4Before applying the sealant,
place the lavatory temporar-
ily into the cut-out. Check
for alignment and clearance.
Then mark the lavatory
countertop in several places
as a guide for the installa-
tion location.
and
After checking fit and
alignment, turn lavatory
upside down and apply
a generous portion of
sealant around the
underside of the rim
near the edge. Carefully
lower lavatory in place,
align with marks made
earlier, and press down
firmly. Allow sealant to
set before connecting
supplies and drain.
6
Connect supply line to
faucet (finger tight) and
carefully bend tubes to
engage with the supply
shut-off valves. Tighten
connections at faucet
and shut-off valves for
secure seal.
7
Connect trap to drain
assembly hand tight to
check alignment. It may
be necessary to cut off
part of the tailpiece
(area "B") or part of
the horizontal leg of the
trap (area "C"). Secure
joints for watertight
assembly.
BC
Shut-Off
Valves
730524-100
Cut opening around
the perimeter of the
template.
Perimeter
of template
Perimeter
of template
5
A