American Water Heater NRGSS01010 User manual

* For complete warranty information consult the written warranty of American Water Heaters found at www.americanwaterheater.com, or call [phone].
Copyright© by American® Water Heaters 2008. All rights reserved.
No part of this work may be reproduced or transmitted in any form or by any means, electronic or mechanical, including photocopying and recording, or by any information storage retrieval system, without permission in writing from AmericanWater Heaters.
Copyright© by American® Water Heaters 2010. All rights reserved.
PRESSURIZED COMBUSTION SYSTEM
• Exclusive and patented pressurized combustion chamber with an advanced
blower distributes an optimum air-to-gas mixture pushing exhaust gases
atmospheric gas product on the market with a .70 Energy Factor (EF).
INSTALLER-FRIENDLY
• Allows for easy replacement of standard atmospheric vent heaters.
• Easily connects to existing B-vent.
• Plugs into standard 110/120V outlet (10 foot power cord included).
24V ELECTRONIC CONTROLS
•
ELECTRONIC IGNITION
• The durable hot surface ignitor eliminates pilot relight issues (no standing pilot).
LCD USER INTERFACE
• Easy-to-read, eye level display. Simple temperature settings and adjustments. Service
diagnostics are in plain text.
POWERED ANODE ROD
•
they provide exceptional performance in all water conditions.
MEETS ENERGY-EFFICIENCY REQUIREMENTS FOR MOST GAS UTILITY
REBATE PROGRAMS AND MEETS ENERGY STAR® REQUIREMENTS.
DURABLE TAMPER-RESISTANT BRASS DRAIN VALVE
DIFFUSER DIP TUBE
• Helps reduce lime and sediment buildup, maximizes hot water output.
• Made from long-lasting PEX cross-linked polymer.
GREEN CHOICE® GAS BURNER
• Patented “Eco-Friendly” Green Choice® gas burner reduces NOx emissions by 33%
compared to standard burners and meets low NOx requirements of less than 40ng/j.
CSA CERTIFIED AND ASME RATED T&P RELIEF VALVE
CODE COMPLIANCE: UBC, CEC, SBCC, CABO, HUD, BOCA NATIONAL CODES,
CURRENT EDITION ASHRAE/IESNA 90.1 AND 2004 NAECA STANDARDS
DESIGN-CERTIFIED BY CSA INTERNATIONAL
• According to ANSI Z21.10.1 - 4.1 CSA Standards governing storage-type water heaters.
NRGSS01010 May 2011R
6-Year Limited Tank/ 6-Year Limited Parts Warranty*
PCG6240T403NOV and
PCG6250T403NOV
®
Low Lead Content
Series 100
236830_NRGSS01010.indd 1236830_NRGSS01010.indd 1 5/27/11 9:03 AM5/27/11 9:03 AM

Order Entry and Sales
500 Princeton Road (FEDEX, UPS)
Johnson City, TN 37601-2030
P.O. Box 4808 (Mailing)
Johnson City, TN 37602-4808
[phone]
FAX [phone]
No part of this work may be reproduced or transmitted in any form or by any means, electronic or mechanical, including photocopying and recording, or by any information storage retrieval system, without permission in writing from AmericanWater Heaters.
Distributed By:
Warranty and Service
500 Princeton Road (FEDEX, UPS)
Johnson City, TN 37601-2030
P.O. Box 1597 (Mailing)
Johnson City, TN 37605-1597
[phone]
FAX [phone]
BC
A
D
F
8”
GAS VALVE
DRAIN VALVE HOT
CONNECTION
COLD
CONNECTION
ANODE ROD
ON/OFF SWITCH
FRONT VIEW
TOP VIEW
DRAFT HOOD
T&P VALVE
1/2”
E
Residential gas water heater(s) shall be models ____________ as manufactured by American Water Heaters, or an approved equal, and shall have a ______ -year tank
warranty and a ______ -year parts warranty, when installed in a residential application. Heater(s) shall have a storage capacity of ______ gallons and shall have a rated
input of __________ BTUs, and shall be designed, tested and listed with CSA International in accordance with the latest edition of ANSI Z21.10.1 - CSA 4.1 standards.
1992. The interior of the storage tank shall be lined with a Fused Ceramic Shield lining, fused to the tank at 1600° F, forming a corrosion-resistant lining; polymer linings
are not acceptable. Each tank shall be furnished with an internal powered anode for cathodic protection. The unit must be equipped with a combination gas control
thermostat and non-reset type ECO. A corrosion-resistant drain valve shall be provided on the front of each unit. The tank shall be totally encased in a steel jacket, painted
NRGSS01010 May 2011R
All dimension in inches.
Recovery capacity based on actual performance tests.
Water Connections – 3/4” on all models.
Not available in LP gas (Propane).
Flammable Vapor Ignition Resistant Water Heaters
This FVIR design meets the American National Standards Institute standards (ANSI Z21.10.1 - CSA 4.1 Standards) that deal with the
MODEL
NUMBER
GALLON
CAPACITY
ENERGY
FACTOR
BTU INPUT
PER HOUR
RECOVERY
AT 90°
RISE
FIRST
HOUR
RATING
FOAM
THICKNESS
(INCHES)
DIMENSIONS IN INCHES DRAFT
HOOD
OUTLET
SHIPPING
WEIGHT
(LBS)
AB CD E F
PCG6240T403NOV 40 .70 40,000 43 70 GPH 2 20 61-3/4 58 51-1/2 23-1/4 25 3 or 4 157
PCG6250T403NOV 50 .70 40,000 43 81 GPH 2 22 60-5/8 57-1/8 50-1/2 25-1/4 27 3 or 4 171
Maximum Hydrostatic Working Pressure: 150 PSI
Heaters shall meet the Federal Energy Efficiency Standards effective January 20, 2004, according to the National Appliance Energy Conservation Act (NAECA) of
SERIES
102
100
Certified for installations up to 10,100 ft. elevations.
236830_NRGSS01010.indd 2236830_NRGSS01010.indd 2 5/27/11 9:03 AM5/27/11 9:03 AM