American TIM-900 Supplement

Total type (Total or
Resettable Total)
Batch total
measurement
unit
Total
measurement
unit
Operation in
AUTO mode
AUTO key
to select and
confirm the
preset value
RESET key to reset
the Batch Total
and display the
Resettable Total
Numeric keys
to set the
preset value
TIM-900
Dispensing nozzle for oil
and industrial fluids
BULLETIN M 0096A REV.1
English
Batch Total
Short Guide
TIM-900B-1, TIM-900B-LN
(aka M0095 C)
TIM-900B-1, TIM-900B-LN
(aka M0095 C)
TIM-900B-1, TIM-900B-LN Short Guide
(aka M0096 A)

If the TIM-900 is off, type
RESET to re-start it.
The TIM-900 displays:
To reset the Batch Total press
RESET.
The TIM-900 will display:
Reset Batch Total.
To RESET the
Resettable Total, press
and hold down the
RESET key.
The TIM-900 will display:
Release the trigger to
stop dispensing.
Pull the trigger to
dispense.
To select a new PRESET value (for
example 12.3) use the numeric keys.
Selected value.
To confirm the PRESET
value, press and hold
down the AUTO key
until the TIM-900
displays:
Reset Batch Total.
Setting a new
PRESET value.
If the TIM-900 is off, type RESET
to re-start it. TIM-900 displays:
AB
Dispensing in
manual mode
Non-resettable Total.
Last amount dispensed.
Resettable Total.
Resettable Total.
The TIM-900 displays:
Blinking message AUTO.
Selected value.
AUTO
message
not blinking.
Non-resettable Total.
Setting the PRESET value
for AUTO mode
dispensing

AUTO last:
the last PRESET value used
AUTO 1-2-3-4-5:
five different PRESET values of
frequent use.
Non-resettable total.
Press AUTO.
The TIM-900 displays the
PRESET value stored in
AUTO LAST.
PRESET value.
Press AUTO again.
The TIM-900 displays the
PRESET value stored
in AUTO 1.
PRESET value.
To display the other stored
values, press AUTO as many
times as necessary to reach
the desired values.
Blinking message
will be:
TIM-900 is ready to start dispensing
in AUTO mode (see paragraph C).
Selecting a PRESET
value of frequent use.

To confirm a PRESET
value press and hold
down the AUTO key
until the TIM-900
displays:
Reset Batch Total.
AUTO message
Not blinking.
TIM-900 is ready to start dispensing
in AUTO mode (see paragraph C).
English
TIM-900 stores:
If the unit is off, type RESET to re-start it.
The TIM-900 displays:
Last amount dispensed.
Blinking
message AUTO LAST.
Blinking
message AUTO 1.
Selected value.

Pull the trigger
completely and then
release it.
The trigger thus
remains locked in
open position.
Now dispensing can
continue in AUTO
mode
• To start dispensing:
• To stop manually dispensing in
progress:
Pull again the trigger completely and
then release it.
Warning
In any case the operator must
attend to the TIM-900 while
dispensing in AUTO mode in
order to avold any oil spillage
• Automatic stop:
The supply automatically stops
when the pre-set value is reached..
• Manual resumption of the
dispensing (TOPPING UP):
Once dispensing has been carried
out in AUTO mode, the TIM-900
allows the user to continue the
dispensing operation, if necessary.
To carry out the TOPPING UP,
DO NOT type RESET and pull
the trigger.
The dispensed amount is added to
the previous one in AUTO mode.
The PRESET value previously set,
displayed in the Total, starts
blinking to indicate that the pre-set
value has been exceeded.
The AUTO indication
disappears from the LCD.
C
Blinking value.
Dispensing in
AUTO mode