Ameriwood HOME 3294013COM User manual

B343294013COM00GO
- Unit can tip over causing severe injury or death.
- Anchor unit to stud in wall (if instructed to).
- Do Not allow children to climb on unit.
- Put heavy items on lower shelves or drawers.
WARNING
THIS INSTRUCTION BOOKLET CONTAINS IMPORTANT SAFETY INFORMATION. PLEASE READ AND KEEP FOR FUTURE REFERENCE.
Do Not Return This Product!
Contact our customer service team for help first.
Call: 1-800-489-3351 (toll free)
Monday-Friday 9am - 5pm CST
Visit: www.ameriwoodhome.com
Follow Ameriwood Home
Date of Purchase ___ / ___ / ___
Lot Number:
3294013COM
DESK W/CABINET
Tube
You
Assembly Difficulty Meter
Easy Tough

Do NOT return this product!
Contact our friendly customer service team first for help.
Visit ameriwoodhome.com
Assembly Tips
- Open your item in the area you plan to keep it to avoid excessive heavy lifting.
- Identify, sort and count the parts before attempting assembly.
- Compression dowels are lightly tapped in with a hammer.
- Slides are labeled with a R (right) and L (left) for proper placement.
- Make sure to always face the point on the top of the Cam Lock towards the
outer edge.
- Use all the nails provided for the back panel and spread them out equally.
- Back panel must be used to make sure your unit is sturdy.
- Do NOT use harsh chemicals or abrasive cleaners on this item.
- Never push, pull, or drag your furniture.
ameriwoodhome.com
2
PEOPLE NEEDED FOR ASSEMBLY: 1-2
ESTIMATED ASSEMBLY TIME: 1.0-1.5 HOUR
Contact Us!
Helpful Hints
Call us!
1-800-489-3351
Monday-Friday
9am - 5pm CST
Tube
You
Tube
You

P
Quick
Tip
Assembly
P
P
P
ameriwoodhome.com
3
Read through each step carefully and follow the proper order
Separate and count all your parts and hardware
Give yourself enough room for the assembly process
Have the following tools: Flat Head Screwdriver, #2 Phillips Head
Screwdriver and Hammer
Caution: If using a power drill or power screwdriver for screwing,
please be aware to slow down and stop when screw is tight.
Failure to do so may result in stripping the screw.
P
Before You Start
Cam Lock Fastening System
This Cam Lock Fastening System will be used throughout the assembly process.
1
3
2
4
Tube
You

Board Identification
Not actual size
ameriwoodhome.com
4
A
DESK TOP
T3294013010GO
QTY: 1 PC
Tube
You
B
RIGHT TOP
T3294013020GO
QTY: 1 PC
C
LEFT PANEL
T3294013030GO
QTY: 1 PC
D
LEFT PARTITION
T3294013040GO
QTY: 1 PC
E
MID-RIGHT PARTITION
T3294013050GO
QTY: 1 PC
F
RIGHT PANEL
T3294013060GO
QTY: 1 PC
G
MODESTY
T3294013070GO
QTY: 1 PC
H
APRON LEFT
T3294013080GO
QTY: 1 PC
I
APRON RIGHT
T3294013090GO
QTY: 1 PC

Board Identification
Not actual size
ameriwoodhome.com
5
Tube
You
J
ADJ SHELF - LEFT
T3294013100GO
QTY: 1 PC
K
ADJ SHELF - RIGHT
T3294013110GO
QTY: 1 PC
L
BOTTOM
T3294013120GO
QTY: 1 PC
M
DOOR
T3294013130GO
QTY: 1 PC
N
BASE CENTER
T3294013140GO
QTY: 1 PC
O
BASE FOOT
T3294013150GO
QTY: 2 PCS
P
BACK PANEL
T3294013160GO
QTY: 1 PC

Board Identification
Not actual size
ameriwoodhome.com
6
Tube
You
C
E
A
B
D
F
G
H
I
J
K
L
M
N
O
O
P

Part List
ameriwoodhome.com
7
Hardware Bag Reference number:
23294013COM0GO
Actual Size
×30
×30 ×33
CAM LOCK
TGO2101
WOOD DOWEL
TGO2900
Ø8 x 30mm
Ø15 x 12mm
123
Ø6 x 25mm
CAM BOLT
TGO2001
Tube
You
×12
Ø3.5 x 14mm
SCREW
TGO1005
Not Actual Size
6
×64
Ø4.2 x 45mm
SCREW
TGO1008
Ø1.7 x 18mm
×18
NAIL
TG06517
5
×8
SHELF SUPPORT
TGO2810
7 ×2
DOOR HINGE
TGO4311
×1
WIRELESS CHARGER
TGO9093
×1
PAD
TGO6514
8910
×16
11
COVER
TGO2219
Ø 20mm

ameriwoodhome.com
STEP
8
1
1.1 Cam bolt (2) into (A), (B), (C), (D), (L) and (O)x2 as illustrated
×30
2
Tube
You
A
B
C
D
D
L
O x 2
left sunface
right sunface
2
2

ameriwoodhome.com
STEP
9
2
Tube
You
2.1 Insert (3) into (C), (D), (G) and (F) as illustrated.
3 ×16
3
3
F
G
D
C

ameriwoodhome.com
STEP
10
3
Tube
You
3 ×17
3.1 Insert (3) into (B), (E), (H), (I), (N) and (O) x 2 as illustrated.
3
I
N
H
E
B
O x 2
3

ameriwoodhome.com
STEP
11
4
4.1 Attach (G), (H) into (C), (D) with (1) as illustrated.
Tube
You
1 ×6 Proper orientation of CAM LOCK
Tip
UNLOCK
LOCK
Quick
Assembly
11 ×4
C
D
G
H
1
11
1
FINISHED EDGE
FINISHED EDGE
FINISHED EDGE

ameriwoodhome.com
STEP
12
5
5.1 Attach (C), (D), (G), (H) into (A) with (1) as illustrated.
Tube
You
1
11
1
1 ×9 11 ×6
D
C
G
H
A
Proper orientation of CAM LOCK
Tip
UNLOCK
LOCK
Quick
Assembly

ameriwoodhome.com
STEP
13
6
6.1 Attach (B) into (D) with (1) as illustrated.
Tube
You
D
B
1
11
1 ×2 11 ×2
FINISHED EDGE
Proper orientation of CAM LOCK
Tip
UNLOCK
LOCK
Quick
Assembly

ameriwoodhome.com
STEP
14
7
7.1 Insert (E),(F) into (I) as illustrated.
7.2 Attach (N) into (O) x 2 with (1) as illustrated.
Tube
You
1
N
O
O
FINISHED EDGE
FINISHED EDGE
E
F
I
1 ×2 Proper orientation of CAM LOCK
Tip
UNLOCK
LOCK
Quick
Assembly

ameriwoodhome.com
STEP
15
8
8.1 Attach (E), (F), (I) into (B) with (1) as illustrated.
Tube
You
1 ×6 11 ×4 Proper orientation of CAM LOCK
Tip
UNLOCK
LOCK
Quick
Assembly
1
1
11
E
F
IB

ameriwoodhome.com
STEP
16
9
9.1 Attach (L) into (D), (E), (F) with (4) as illustrated.
Tube
You
F
E
D
FINISHED EDGE
4
4 ×6
L

ameriwoodhome.com
STEP
17
10
Tube
You
10.1 Attach (N) into (O) x 2 with (1) as illustrated.
1 ×5
1
O
O
N
L
F

ameriwoodhome.com
STEP
18
11
Tube
You
11.1 Attach (P) into (B), (D), (E), (F) and (L) with (5) as illustrated.
5 ×18
5
L
F
E
D
B
P

ameriwoodhome.com
STEP
19
12
Tube
You
12.1 Attach (8) into (M) with (6) as illustrated.
12.2 Attach (8), (M) into (F) with (6) as illustrated.
6 ×12
6
6
8 ×2
8
M
M
F

ameriwoodhome.com
STEP
20
13
Tube
You
A
A
B
C
Cabinet
Door
Cabinet
Door
Cabinet
Door
To adjust the vertical height.
Loosen the four screws "A" on bolt hinges. Two of them are usually in slotted
holes which allows you to adjust up of down by a few mm. then tighten back up.
Para ajustar la altura vertical
Afloje los cuatro tornillos "A" en ambas bisagras. Dos de esos están usualmente
en los agujeros llanos. Lo que significa que usted puede regular de arriba hacia
abajo. Por unos pocos milimetros. Luego apriete hacia arriba.
Pour régler la hauteur verticale.
Desserrez les quatre vis "A" sur les deux charnières. Deux d'entre elles sont
habituellement dans des fentes afin de vous permettre de les vis après
l'ajustement.
To adjust side ways.
Turning the screw "C" on BOTH hinges on each door.
Para ajustar los lados marcados
Gire los tornillos "C" de ambas bisagras en cada puerta
Pour régler latéralement.
Tournez la vis "C" sur les DEUX charnières de chaque porte.
To adjust the vertical height.
Loosen screw "B" and adjust door, if the door can not be adjusted, please
loosen screw "C", then try again. Tighten screw "B" and "C".
Para ajustar profundo.
Afloje los tornillos y ajuste la puerta, si la puerta no puede ser ajustada. Por
favor afloje los tornillos "C" y luego trate otra vez.
Apriete los tornillos "B" y "C"
Pour régler la profondeur.
Desserrez la vis "B" et ajustez la porte. Si la porte ne peut pas s'ajuster,
desserrez la vis "C", pui essayez de nouveau.
Serrez les vis "B" et "C".