Ameriwood HOME 9151026PCOM User manual

B349151026PCOM5
9151026PCOM
STOP
1-800-489-3351
Need Parts or Assistance?
WWW.AMERIWOOD.COM/PARTS
If a part is missing or damaged, visit our website or call our toll-free
customer service line. We will gladly ship your replacement parts
FREE of charge.
For prompt, reliable service please have your assembly manual ready.
DO NOT RETURN PRODUCT TO THE STORE
Individual stores do not stock parts.
or call toll free:
Recommended # of people needed for assembly: 2
(however it is always better to have an extra hand.)
Estimated assembly time is 2 hours.
Se localizan las traducciones españolas en el centro de este
manual.
THIS INSTRUCTION BOOKLET CONTAINS
IMPORTANT SAFETY INFORMATION. PLEASE
READ AND KEEP FOR FUTURE REFERENCE.
Date of Purchase
___ / ___ / ___
Please Recycle
Recicle Por Favor

B349151026PCOM5
3 /28
Parts
??www.ameriwood.com??
left panel
39118026011 right panel
39118026022
left partition
39118026031
right partition
39118026041
modesty panel
39118026101
desk top
39151026111
right fixed shelf
39118026141
left bottom
39118026151
right bottom
39118026161
left kick
39118026170
right kick
39118026180
left apron
39118026190
right apron
39118026200
front crown molding
39118026210
left lower crown molding
39118026221
right lower crown molding
39118026231
left door
39118026280
ABCDJ
O
NPQR
K
S
TUVWBB

B349151026PCOM5
4 /28
Parts
??www.ameriwood.com??
right door
39118026291
pencil drawer front
39118026300
2 pencil drawer sides
39118302310
pencil drawer back
39118302320
keyboard drawer front
39118026330
left keyboard
drawer side
39118026340
right keyboard
drawer side
39118026350
keyboard drawer back
39118026360 keyboard drawer bottom
39118026370
file drawer front
39118026380
left file drawer side
39118302390 right file drawer side
39118302400
file drawer back
39118302410
pencil drawer bottom
K911830280
file drawer bottom
K911830270
left back panel
K911802630
right back panel
K911802640
CC DD FF GG HH
II JJ KK LL MM NN
OO PP QQ
RR SS
EE
12
3
457
6
#A22570
cam lock
qty: 20
#A22510
cam bolt
qty: 20
#A30030
plastic catch
qty: 4
#A70040
50mm grommet
qty: 2
#A80250
shelf support
qty: 3
#A17400
#8-32 X 7/8"
machine screw
qty: 10
#A60500
flap hinge
qty: 2
3a 3b

B349151026PCOM5
5 /28
Parts
??www.ameriwood.com??
#A09130
#4 x 1/2" flat head
screw
qty: 10
#A11080
#6 x 7/16" flat head screw
qty: 22
#A21110
nail
qty: 36 #A53760
drawer
bracket
qty: 8
#A53600
angle bracket
qty: 12
#A15600
drawer screw
qty: 16
#A11600
#6 X 1-1/4" flat head
screw
qty: 8
#A12840
#8 X 1" screw
qty: 8
#A12210
#8 X 1/2" pan head
screw
qty: 66
#A13410
#8 X 1-3/4" flat head
screw
qty: 11
#A60010
hinge
qty: 4
9
10 11 12
14 15 16 17 18
#A56540
extension slide
qty: 1
21
20
#A82120
file holder
qty: 2
13
8
19
#A52150
cup pull
qty: 5

B349151026PCOM5
6 /28
Parts
??www.ameriwood.com??
22d
22a
22c
22b
2
3½ turn to fully
lock.
½ se vuelven a
totalmente
cerradura.
4
Tighten to fully seat. Do not over
tighten.
Apriétese a totalmente asiento. No
haga encima de apriétese.
Proper orientation of cam.
La orientación apropiada de leva.
1
This illustration shows how the CAM fastening system works.
Esta ilustración muestra el sistema de fijación de leva y como funciona.
Lock
Apretar
Titus
Titus
Titus
#A56030
drawer slide
qty: 2

1
B349151026PCOM5
7 /28
??www.ameriwood.com??
Insert four CAM LOCKS (1) into the RIGHT FIXED SHELF (N), LEFT BOTTOM (O),
and RIGHT BOTTOM (P) as shown.
x 12
1Proper orientation of CAM LOCK
Posición correcta de la cerradura de leva.
N
P
O
1
1
1
1
1

2
B349151026PCOM5
8 /28
??www.ameriwood.com??
x 2
x 2
x 3
x 1
A
Insert two CAM LOCKS (1) and screw two CAM BOLTS (2) into the LEFT PANEL (A) as shown.
Attach one LEFT CABINET MEMBER (22a) to the LEFT PANEL (A) with three SCREWS (15) as shown.
Fasten one ANGLE BRACKET (18) with one SCREW (12) as shown in the detail.
2
15
15
2
1
15
18
12
x 1
x 1
18
12
22a
Proper orientation of CAM LOCK
Posición correcta de la cerradura de leva.
22a
1

3
B349151026PCOM5
9 /28
??www.ameriwood.com??
x 2
x 2
x 6
x 3
x 1
x 1
C
C
turn over
de la vuelta
x 1
Attach one LEFT CABINET MEMBER (22a) to the LEFT PARTITION (C) with three SCREWS (15).
Turn the panel over and attach one RIGHT CABINET MEMBER (22b) with three SCREWS (15).
On the same side insert two CAM LOCKS (1), screw two CAM BOLTS (2) and attach one PLASTIC CATCH (3a) with
two SCREWS (12). Fasten one ANGLE BRACKET (18) with one SCREW (12).
1
2
15
12
3a
15
15
12
3a
22a
22b
22b
22a
15
15
2
12
18
x 1
18
23b
1
Proper orientation of CAM LOCK
Posición correcta de la cerradura de leva.

4
B349151026PCOM5
10 /28
??www.ameriwood.com??
B
Insert two CAM LOCKS (1) and screw four CAM BOLTS (2) into the RIGHT PANEL (B).
Seperate the EXTENSION SLIDE (21) by extending it until it stops, depress the plastic lever and pull apart. Complete this procedure for both slides.
Attach slide to the RIGHT PANEL with three SCREWS (12). Fasten one ANGLE BRACKET (18) with one SCREW (12) as shown.
USE THESE THREE HOLES WHEN ATTACHING SLIDE.
USE ESTOS TRES AGUJEROS AL ATAR LA DIAPOSITIVA.
PLASTIC LEVER
PLANCA DE PLÀSTICO
x 2
x 4
x 4
x 1
2
12
21
1
2
21
21
12
18
x 1
18
12
1
Proper orientation of CAM LOCK
Posición correcta de la cerradura de leva.

5
B349151026PCOM5
11 /28
??www.ameriwood.com??
x 2
x 4
x 3
x 6
x 1
x 1
x 1
D
D
turn over
de la vuelta
Attach one RIGHT CABINET MEMBER (22b) to the RIGHT PARTITION (D) with three SCREWS (15).
Turn the panel over and attach one EXTENSION SLIDE (21) with three SCREWS (12). On the same surface insert two CAM
LOCKS (1), screw in four CAM BOLTS (2), and attach one PLASTIC CATCH (3a) with two SCREWS (12). Fasten one ANGLE
BRACKET (18) with one SCREW (12) as shown.
2
15
12
3a
15
22b
D
1
2
3a
12
12
12 12
15
15
15
21
21
18
x 1
12
18
22b
1
Proper orientation of CAM LOCK
Posición correcta de la cerradura de leva.

6
B349151026PCOM5
12 /28
??www.ameriwood.com??
Screw eight CAM BOLTS (2) into the DESK TOP (K).
Attach the FRONT CROWN MOLDING (U) to the DESK TOP (K) with five ANGLE BRACKETS (18) and ten SCREWS (12).
NOTE: If you use the optional hutch (model 9902026PCOM), refer to the model 9902026PCOM hutch
assembly manual to attach the desk top to the hutch assembly. Four holes need to be redrilled into
through holes (only if the hutch is used).
x 10
x 5
K
x 8
2
12
18
18
12
12
U
2
2
2
2
2
2
2

7
B349151026PCOM5
13 /28
??www.ameriwood.com??
x 4
This step will require the assistance of a second person.
Secure the LEFT PARTITION (C) and RIGHT PARTITION (D) to the MODESTY PANEL (J) with four SCREWS (13).
If assembled correctly, there will be a 1" (2.5cm) spacing between the top edge of the partitions and the top edge of the
modesty panel.
J
D
C
13
13
13
J
D
1" (2.5cm)

8
B349151026PCOM5
14 /28
??www.ameriwood.com??
Align the LEFT PANEL (A) and LEFT PARTITION (C) with the LEFT BOTTOM (O) so that the CAM BOLTS (2) insert into the CAM LOCKS (1). Turn the CAM
LOCKS (1) clockwise to lock in place.
Align the RIGHT PANEL (B) and RIGHT PARTITION (D) with the RIGHT BOTTOM (P) and RIGHT FIXED SHELF (N) so that the CAM BOLTS (2) insert into
the CAM LOCKS (1). Turn the CAM LOCKS (1) clockwise to lock in place.
finished edge
acabado borde
NOTE THE HOLE LOCATIONS.
OBSERVE LAS LOCALIZACIONES DE LOS AGUJEROS
A
B
C
D
J
N
P
O2
1
UNLOCKLOCK
APRETAR
DESAPRETAR

9
B349151026PCOM5
15 /28
??www.ameriwood.com??
Align the left and right assemblies with
the DESK TOP (K) so that the CAM
BOLTS (2) insert into the CAM LOCKS (1).
Turn the CAM LOCKS (1) clockwise to
lock in place.
NOTE: Adjust the moldings (S, T, V, W)
for best fit when
attaching them to the unit with the
SCREWS (11).
A
K
CD
B
J
S
T
W
V
x 8
NOTE: IF YOU HAVE PURCHASED THE OPTIONAL
HUTCH, YOU NEED TO FOLLOW MODEL 9902026PCOM
ASSEMBLY MANUAL. (THERE ARE FOUR HOLES THAT
MUST BE DRILLED THROUGH TO ATTACH THE DESK
TOP (K) TO THE HUTCH PANELS).
11
11 11
1
2
UNLOCKLOCK
APRETAR
DESAPRETAR

10
B349151026PCOM5
16 /28
??www.ameriwood.com??
x 3
x 10
Attach the LEFT KICK (Q) to the LEFT PANEL (A), LEFT PARTITION (C), and LEFT BOTTOM (O) with three ANGLE BRACKETS (18) and six
SCREWS 12).
Attach the RIGHT KICK (R) to the RIGHT PANEL (B), RIGHT PARTITION (D), and RIGHT BOTTOM (P) with four angle brackets (18) and
eight SCREWS (12).
Align both KICKS so that the mitered corner is tight by loosening the SCREWS (11) and (12), adjusting and retightening the screws.
QR
A
B
D
C
P
O
12
18
12
18
12 12
11
18
12 12
18 18

11
B349151026PCOM5
17 /28
??www.ameriwood.com??
With assistance of another person, carefully stand the unit upright.
Position the LEFT BACK PANEL (RR) so the bottom edge of the back panel is even with the bottom edge of the LEFT BOTTOM
(O), and equally spaced side to side. Fasten the LEFT BACK PANEL (RR) to the unit using eighteen NAILS (16).
NOTE: When you begin to nail the back panel to the unit, make sure the unit is square with the back panel
and nail straight through into the back edges of the unit.
Repeat this procedure to fasten the RIGHT BACK PANEL (SS) to the unit.
Por favor asegúrese que las Parte de atrás se atan
firmemente. Todos los clavos deben manejarse en las
partes recto y deben apretarse firmemente. El fracaso para
hacer para que podría causar inestabilidad, derrumbamiento
del producto, y/o la lesión seria.
ADVERTENCIA
Please make sure that Back Panels are attached securely.
All nails must be driven into the parts straight, centered and
tightened firmly. Failure to do so could cause instability,
product collapse, and/or serious injury.
WARNING
x 36 RR
SS
K
A
B
D
C
J
O
P
raw surface
superficie cruda
16
16
IMPORTANT! THE BACK PANEL IS A STRUCTURAL PART OF THIS UNIT AND MUST BE INSTALLED PROPERLY.
IMPORTANTE! EL PANEL TRASERO ES UNA PARTE ESTRUCTURAL DE ESTA UNIDAD Y DEBE SER INSTALADO CORRECTAMENTE.
16

12
B349151026PCOM5
18 /28
??www.ameriwood.com??
x 4
x 4
x 8
x 8
x 2
x 1
x 1
Attach one LEFT DRAWER RUNNER (22c) to the PENCIL DRAWER SIDE (EE) with two SCREWS (15) and two
DRAWER BRACKETS (17) with two DRAWER SCREWS (9).
Attach one RIGHT DRAWER RUNNER (22d) to the other PENCIL DRAWER SIDE (EE) with two SCREWS (15) and two
DRAWER BRACKETS (17) with two DRAWER SCREWS (9).
Attach the drawer members of the EXTENSION SLIDES (21) to the LEFT and RIGHT FILE DRAWER SIDES (MM &
NN) with two SCREWS (12) and two DRAWER BRACKETS (17) with two DRAWER SCREWS (9) each.
12
15
9
17
21
22c
22d
NN
MM
EE EE
plastic lever
palanca plstica plastic lever
palanca plstica
12 12
21 21
22c 22d
15 15
9
9
9
17 17
17 17
17 17

13
B349151026PCOM5
19 /28
??www.ameriwood.com??
x 2
x 3
x 8
x 4
Attach the PENCIL DRAWER SIDES (EE) to the PENCIL DRAWER FRONT (DD) with four DRAWER SCREWS (9).
Attach the LEFT and RIGHT FILE DRAWER SIDES (MM and NN) to the FILE DRAWER FRONT (LL) with four DRAWER
SCREWS (9).
Attach one CUP PULL (19) with two BOLTS (6) onto the PENCIL DRAWER FRONT (DD) and the FILE DRAWER FRONT (LL).
Insert SHELF SUPPORTS (5) into each of the drawer fronts.
19
5
9
6
6
6
5
9
9
9
9
EE EE
9
9
9
19
MM
NN
5
LL
5
19
DD

14
B349151026PCOM5
20 /28
??www.ameriwood.com??
x 4
Slide the PENCIL DRAWER BOTTOM (PP) down the grooves in the PENCIL DRAWER SIDES (EE) until it is
tight against the PENCIL DRAWER FRONT (DD).
Attach the PENCIL DRAWER BACK (FF) with four SCREWS (10).
10
10
10
DD
EE
EE
PP
FF
finished surface
superficie terminada