AMP Lighting ASAL-1027-25-B-BZ Operating and safety instructions

INSTALLATION & MAINTENANCE GUIDE
Help Hotline:
1-813-978-3900 • Mon-Fri 9am-6pm (EST)
www.amplighting.com
AMP®Solar Landscape Lighting
AMP® Solar Spotlight Kit
ASAL-1027-25-B-BZ

AMP®Solar Spotlight Kit
ASAL-1027-25-B-BZ
INSTALLATION & MAINTENANCE GUIDE
www.amplighting.com
–2–
Important Safety Instructions: Read Before Installation
!
Important Safety Instructions
!
Package Contents
This luminaire is intended for installation in accordance with local codes and
the National Electric Code (NEC). Failure to adhere to these codes and in-
structions may result in serious injury, property damage and void the warran-
t y.
These instructions do not intend to cover all variations in installation, opera-
tion maintenance or mounting situations.
INSTRUCTIONS PERTAINING TO A RISK OF FIRE, OR INJURY TO PERSONS
Lighted lamp is HOT!
WARNING – To reduce the risk of FIRE OR INJURY TO PERSONS.
1. Lamp gets HOT quickly!
2. Do not touch the hot lens, guard or enclosure.
3. Keep lamp away from materials that may burn.
4. Do not touch lamp at any time. Use a soft cloth. Oil from skin may dam-
age lamp.
5. Do not operate the luminaire tting with a missing or damaged shield.
SAVE THESE INSTRUCTIONS
Package Contents
A. (1) Spot Light
A. (1) Solar Panel with Bracket

[email protected] • 813.978.3900
Product Dimensions
–3–
1
1.5”
2.5”
2.5”
4”~ 5”
Install Stake
Determine the desired location
for mounting the stake mount.
Hammer the stake into the
ground until ange of stake is
ush to grade. To avoid damage
to the stake, place a board on
top of the stake while hammer-
ing.
Note: If the ground is hard and
the stake is difcult to install,
make a crosscut in the ground
using a at shovel.
Board
Ground
Soil
Stake

INSTALLATION & MAINTENANCE GUIDE
–4–
www.amplighting.com
–4–
3
2
AMP®Solar Spotlight Kit
ASAL-1027-25-B-BZ
Install Fixture to Stake
Pass the xture wire
through the center open-
ing of the stake. Thread
the xture onto the stake.
Hand tighten until snug.
Fixture
Fixture Wire
Ground
Soil
Stake
Wire Connection: Option A (Recommended)
Solar Panel
Spot
Light
Spot Light Supply
Wire
Optional A: Connect with Connection Hub
Connection Hub
Solar Panel
Supply Wire

[email protected] • 813.978.3900
–5–
INSTALLATION & MAINTENANCE GUIDE
3
AMP®Solar Spotlight Kit
ASAL-1027-25-B-BZ
Wire Connection: Option B
You can choose from Option A or Option B to complete the installation.
Option A is the recommended method to install the solar lights.
Optional A: Strip the supply wire leads from the solar panel and the sup-
ply wire leads from the spot lights. Insert both the lead wires into the
connection hub. There is a maximum of 7 xtures that can be connect-
ed to the hub.
Optional B: Strip the supply wire leads from the solar panel and the
supply wire leads from the spot light. Using two wire connectors (sold
separately), connect the leads from the solar panel to the spot light.
Solar Panel
Solar Panel
Supply Wire
Spot Light Supply Wire
Wire Connector
Optional B: Connect with Wire Connectors

INSTALLATION & MAINTENANCE GUIDE
–6–
www.amplighting.com
–6–
AMP®Solar Spotlight Kit
ASAL-1027-25-B-BZ
4
Adjust Fixture Direction
Using the Allen wrench, loosen
the screw on the knuckle and
adjust the xture to your
desired direction. Once your
direction is achieved, tighten
the screw until snug.
Fixture
Allen Wrench
Screw

–6––6–
[email protected] • 813.978.3900
–7–

IS-ASAL-1027-25-B-BZ-ver1.pdf
Specications and product details subject to change without notice.
© Copyright 2020, AMP®Lighting, Lutz FL USA 33549 • All rights reserved.
[email protected] • 813.978.3900
Help Hotline:
1-813-978-3900 • Mon-Fri 9am-6pm (EST)
www.amplighting.com