Amped Wireless AWPS148W User manual

SMART WI-FI POWER STRIP
USER’S GUIDE FOR MODEL AWPS148W
ELECTRICAL RATINGS
Do not exceed specied electrical ratings.
Max Single Jack Output: 125V 10A 1250W
Max Total Output: AC 125V 15A 1875W
POWER SOCKETS X3 SOCKET INDICATOR LIGHTS
POWER
BUTTON & LED
INDICATOR RING
ENTER WI-FI PASSWORD.
AFTER SUCCESSFULLY CONNECTING,
THE INDICATOR RING WILL TURN SOLID
BLUE AND THE PLUG IS READY TO USE.
THIS IS THE CONTROL SCREEN. HERE
YOU CAN TURN ON THE ENTIRE POWER
STRIP OR INDIVIDUAL SOCKETS. YOU CAN
ALSO SET TIMERS AND SCHEDULES,
AND ADJUST SETTINGS.
FROM THE DEVICE MENU, SELECT
THE SMART STRIP TO ACCESS
SETTINGS AND OPTIONS.
SELECT MULTIPLE SOCKET
FROM THE LIST OF DEVICES.
PRESS AND HOLD THE POWER BUTTON.
WHEN THE LED RING IS QUICKLY
FLASHING BLUE, PRESS CONFIRM.
Press to access
Device Settings
and change the
name of each plug.
Turn plugs on individually or all at once
See reverse side for alternate connection method.
Press to rename
the plug.
Smart Life
ANDROID OR APPLE
Smart Strip Status LED Indicator Ring
Power ON, Wi-Fi
Connected Solid Blue
Power ON, Wi-Fi Not
Connected No Light (socket lights on)
Power OFF No Light
Wi-Fi Connecting
(Standard Mode) Quick Flashing Blue
Wi-Fi Connecting
(AP Mode) Slow Flashing Blue
GETTING STARTED
• Download the app by scanning the QR (shown right) with your Android or Apple device, or search “Smart
Life” in the Google Play Store or Apple App Store. If this is your rst time using the app, you will need to
create a user prole and password.
• Plug the Smart Strip into a power socket, the LED ring and socket indicators will be off.
• Press the Power button, the socket indicators will turn on but the LED ring will remain off.
• Press and hold the Power button until the LED ring begins quickly ashing blue (socket indicators will be off).
• Perform the Standard Smart Life Setup (below). When the connection is complete the LED ring will turn solid
blue and remain on (even if you have turned the strip off from the app).
• If the connection has failed, press and hold the Power button again until the LED ring begins slowly ashing
blue, then perform the AP Mode Smart Life Setup (back page).
SMART STRIP SETUP: STANDARD MODE
1. Open the app (you need to login to your prole, if you haven’t already). Tap +in the top corner.
2. Select Multiple Socket in the menu and follow the prompts to connect the AWPS148 Smart Strip to your
network. You will need to enter your Wi-Fi password at this time.
3. The screen will display the connection status. When it reaches 100%, setup is complete and the Smart Strip is
ready to use. You can rename the strip now, or click Done to complete setup.
4. The Smart Strip will appear in the Devices menu. Select it to manage settings and power it on.

AW PS14 8W v2105 -01
SELECT THE SMART STRIP. WHEN
CONNECTED, RETURN TO THE
APP. NOTE THAT IT MAY TAKE A
FEW MOMENTS TO CONNECT.
WHEN SUCCESSFULLY ADDED,
YOU MAY BEGIN USING THE
SMART STRIP.
SELECT AP MODE. PRESS AND HOLD THE POWER BUTTON ON
THE STRIP FOR 5 SECONDS AND CONFIRM
THE INDICATOR RING IS SLOWLY FLASHING
BLUE, THEN PRESS CONFIRM.
PRESS CONNECT NOW TO
PROCEED TO YOUR ANDROID
PHONE’S WI-FI SETTINGS MENU.
APPLE IOS USERS, EXIT THE APP
AND MANUALLY ACCESS YOUR
WI-FI SETTINGS MENU.
SETTING UP SCENES IN THE SMART LIFE APP
With Scenes, you can set your plug to automatically activate under a given set of circumstances or conditions.
CHANGE THE CONDITIONS
AND SETTINGS.
SELECT SCENES FROM THE
HOME SCREEN.
SMART STRIP SETUP: AP MODE
If the app fails to automatically connect to the Smart Strip, you can use AP Mode to connect from your phone’s Wi-Fi settings
menu. Apple products will ask you to exit the app and go to Settings > Wi-Fi, Android devices (as below) will do this
automatically. After the connection is established, proceed as normal to nalize and begin using the Smart Strip.
ENTER WI-FI PASSWORD
AND CONFIRM.
SMART WI-FI POWER STRIP
USER’S GUIDE FOR MODEL AWPS148W
PRESS +TO ADD A NEW
SCENE. TAP AN EXISTING
SCENE TO EDIT IT.