TELink 700 FLASH 204/2009
FCC Notice
WARNING: This equipment has been tested and found to comply with the limits for a Class A digital device
pursuant to Part 15 of FCC Rules. These limits are designed to provide reasonable protection against harmful
interference when this equipment is operated in a commercial environment. This equipment generates, uses,
and can radiate radio frequencyenergyand, if not installed and used in accordance with the instruction manual,
may cause harmful interference to radio communications. Operation of this equipment in a residential area is
likely to cause harmful interference in which case the user will be required to correct the interference at his/her
own expense.
This digitalapparatus doesnot exceed the ClassA limits for radio noise emissions from digitalapparatus
set out in the Radio Interference Regulations of the Canadian Department of Communications.
Le présent appareil numériquen'émet pasde bruitsradioélectriques dépassantleslimitesapplicablesaux
appareils numériques de la Class A prescrites dans le Règlement sur le brouillage radioélectrique édicté par le
ministère des Communications du Canada.
Limited Warranty{tc \l1 "LIMITED WARRANTY}
TERMS: Audio Messaging Solutions (“AMS”) warrants to the original purchaser ("Buyer") that the
Product sold is free from defects in material and workmanship at the time of purchase. The warranty
extends five (5) years from the date of original purchase and covers parts and labor. Buyer must
provide written notice to AMS within the warranty period of any defective part or conditions. If the
defect is not the result of improper use, service, maintenance or installation, and if the equipment has
not been otherwise damaged or modified after shipment, AMS or its authorized representative shall
either replace or repair the defective Product at AMS's option. No credit shall be allowed for work
performed by Buyer or unauthorized parties. Out-of-warranty repairs will be invoiced at the current
hourly rate plus the cost of parts, shipping and handling. IN THE EVENT THAT THE PRODUCT
SERIAL NUMBER IS MISSING OR HASBEEN TAMPEREDWITH IN ANYWAY, THE FOREGOING
WARRANTY IS VOID AND WITHOUT EFFECT AND AMS SHALL HAVE NO LIABILITY
WHATSOEVER ON ACCOUNT OF DEFECTS TO SUCH PRODUCT.
LIMITATIONS: EXCEPT AS STATED ABOVE, THERE ARE NO WARRANTIES, EXPRESSED OR
IMPLIED, THAT EXTEND BEYOND THE SPECIFICATIONS FOR THE PRODUCT. AMS
EXPRESSLYDISCLAIMSANYWARRANTY,EXPRESSEDOR IMPLIED,THAT EQUIPMENTSOLD
HEREUNDER IS OF MERCHANTIABLE QUALITY OR THAT IT CAN BE USED, ORIS FITFORANY
PARTICULAR PURPOSE. BUYER PURCHASES AND ACCEPTS EQUIPMENT SOLELY ON THE
BASISOFTHEWARRANTYHEREINABOVEEXPRESSED. UNDERNO CIRCUMSTANCES SHALL
AMS BE LIABLE BY VIRTUE OF THIS WARRANTY OR OTHERWISE FOR ANY SPECIAL,
INDIRECT, SECONDARY OR CONSEQUENTIAL DAMAGES TO ANY PERSON OR PROPERTY
ARISING OUT OF THE USE OR INABILITY TO USE THE PRODUCT.
REPAIRING OR REPLACING PRODUCT: Buyermayobtaintherepairorreplacementofanyeligible
partorequipmentcoveredunderthiswarrantythroughAMS only. Buyerisresponsibleforallshipping
and handlingcharges in connection with the performance of this warranty. Products returnedto AMS
must be securely packaged to prevent damage in transit, freight prepaid,andinsuredfor replacement
value. A return authorization number assigned by AMS must be clearly marked on the outside of the
shipping container. Proof of purchase must accompany shipment. Items delivered to AMS without a
return authorization clearly marked on the outside of the shipping container, and/or without proof of
purchase will be refused. Please contact AMS at the address and phone number below to receive a
return authorization number and to arrange for the repair or replacement of a flawed part covered by
this warranty. Please indicate the Product's serial number in all correspondence. an authorization
number willnotbe issued inthe absenceof a serialnumber. Audio MessagingSolutions,720Brooker
Creek Blvd., Ste. 215, Oldsmar, FL 34677 Phone: (800) 584-4653.
Copyright Notice
This manual copyright 1993-2009 by Audio Messaging Solutions All rights reserved. No part of it
may be copied, photocopied, reproduced, translated, or reduced to any electronic medium or
machine-readable form without AMS's prior written consent.
Information contained herein is subject to change without priornotification.AMS providesthismanual
without warranty of any kind, expressed or implied. This user's manual may contain technical and/or
typographical errors.
Printed in the U.S.A
