Anaheim Scientific E100 User manual

Model E100
Gauss Meter

2
anaheimscientific.com Technical data subject to change without notice
©Anaheim Scientific 2013. 20130719
Table of Contents
1INTRODUCTION............................................................................... 3
1.1 The E100 Features: ................................................................... 3
1.2 The E100 Applications ............................................................... 3
2SAFETY SUMMARY......................................................................... 4
3COMPLIANCE STATEMENTS......................................................... 5
4PRODUCT CONTENTS AND INSPECTION .................................... 5
5ELECTROMAGNETIC FIELDS ........................................................ 6
6IDENTIFYING PARTS ...................................................................... 7
7DEVICE OPERATION....................................................................... 7
8SPECIFICATIONS .......................................................................... 10
9SERVICE, REPAIRS, CALIBRATION............................................ 11
10 LIMITED TWO-YEAR WARRANTY ................................................ 13

3
anaheimscientific.com Technical data subject to change without notice
©Anaheim Scientific 2013. 20130719
1 Introduction
Thank you for purchasing the E100 Gauss Meter from
Anaheim Scientific. The E100 is a magnetic field meter
designed to measure extremely low frequencies (ELF)
of 30 to 300Hz.
1.1 The E100 Features:
•Readings in micro-Tesla or milli-Gauss
•Data hold (HOLD)
•Maximum hold (MAX)
•Range display (20,200,2000)
•Low battery indicator “ ”
•Over load display “OL”
1.2 The E100 Applications
•This meter is applied to measuring electromagnetic
fields of extremely low frequency (ELF) of 30 to
300Hz.
•It is capable of measuring the electromagnetic field
radiation intensity that is produced from electric
transmission equipment, power lines, microwave
ovens, air conditioners, refrigerators, computer
monitors, video/audio devices and so forth.
•The magnetic field unit is Tesla (T), Gauss (G),
milli-Gauss (mG) or micro-Tesla (µT)
1 T＝10,000 G
1 G＝1,000
mG
1µT＝10 mG

4
anaheimscientific.com Technical data subject to change without notice
©Anaheim Scientific 2013. 20130719
2 Safety Summary
CAUTION
Adhere to the following conditions for safe
and effective usage of this meter
•Do not operate the meter in an environment filled
with combustible gas, liquids, dust or fibers
•In order to avoid reading incorrect data, please
replace the battery immediately when the symbol
“" appears on the LCD
•In order to avoid damage caused by contamination
or static electricity, do not touch the circuit board
before taking adequate precautions
•Operating Environment: This instrument has been
designed for usage within an environment of
Pollution Degree 2
•Operation Altitude: Up to 2000M
•Operating temperature & humidity: 5℃to 40℃,below
80% RH.
•Storage temperature & humidity: -10℃to 60℃,
below 70%.
•In the case of prolonged storage, it is preferable to
remove the battery from the meter.
•Avoid shaking the meter, particularly while in
operation.
•For cleaning the instrument use a soft dry cloth.
Never use a wet cloth, solvents or water, etc.

5
anaheimscientific.com Technical data subject to change without notice
©Anaheim Scientific 2013. 20130719
•Weather conditions outside the specified limits and
improper handling may adversely affect the
accuracy and function of the meter.
3 Compliance Statements
Caution: This symbol indicates that the
equipment and its accessories are
subject to special collection and
disposal procedures
4 Product Contents and Inspection
This unit is tested prior to shipment. It is therefore ready
for immediate use upon receipt. An initial physical
inspection should be made to ensure that no damage
has been sustained during shipment.
Inspect the packing box on receipt for any external
damage. If any external damage is evident, remove the
instrument and visually inspect its case and parts for
any damage. If damage to the instrument is evident, a
description of the damage should be noted on the
carrier’s receipt and signed by the driver or carrier
agent. Save all shipping packaging for inspection.

6
anaheimscientific.com Technical data subject to change without notice
©Anaheim Scientific 2013. 20130719
Forward a report of any damage to the agent through
which the unit is procured.
Retain the original packing in case subsequent
repackaging for return is required. Use of the original
packing is essential.
After the mechanical inspection, verify the contents of
the shipment. The items included in this package are:
•E100 Meter
•User manual
•9V battery
•Carrying case
5 Electromagnetic Fields
Safety precautions should be taken against electric
appliances in places including medical institutions,
schools and residential districts, where people usually
stay for a long time, to prevent patients, babies and
senior citizens from exposure to high electromagnetic
waves.
An electromagnetic wave simply means the wave
motion of the electromagnetic field (EMF).
The change in electric fields produces magnetic fields,
and the change in magnetic fields can also generate
electric fields. The fluctuation of correlation between
each other is known as “electromagnetic waves", which

7
anaheimscientific.com Technical data subject to change without notice
©Anaheim Scientific 2013. 20130719
is a form of energy similar to light and heat that can be
transmitted either by radiation in the air or by an electric
conductor.
It is suggested that rearrangements should be made in
homes and work locations where electromagnetic fields
are strongly detected in order to avoid prolonged
exposure to excessive electromagnetic fields.
6 Identifying Parts
1. Sensor position
2. LCD
3. Power on/off
4. Maximum hold button
5. Data hold button
6. mG unit select button
7. µT unit select button
8. Range select button
9. Battery cover
7 Device Operation
Press to power on.

8
anaheimscientific.com Technical data subject to change without notice
©Anaheim Scientific 2013. 20130719
•Select for mG unit or for µT unit.
•Position the front (refer to Figure 1) of the meter to
measure the electromagnetic waves. Try to change
the measurement angle or position to obtaining the
highest reading value (please refer to Figure 2 to 6).
•Read the measured value. The display of “OL” on
the left highest position indicates there is an
overload on the reading. Please press to
select a higher range to measure again.
•Due to the environmental magnetic field factors, this
magnetic field meter might display a reading value
that is lower than 0.5mG prior to measuring. This is
not a malfunction of the device.
•To permanently lock and keep the reading displayed
on the LCD, press or press again to
unlock.
•To retain the maximum value, press and the
reading value displayed on the LCD will keep
updating to the maximum value.

9
anaheimscientific.com Technical data subject to change without notice
©Anaheim Scientific 2013. 20130719
(*1) Indicates the incoming electromagnetic wave
•Figure 1 indicates the correct measurement
direction for the electromagnetic wave.
•Figure 2, 3, 4, 5 and 6 indicate the incorrect
measurement direction for the electromagnetic
wave.

10
anaheimscientific.com Technical data subject to change without notice
©Anaheim Scientific 2013. 20130719
8 Specifications
Display
3-1/2 digits LCD, maximum
reading 1999
Range
200/2000 mG, 20/200µT
Resolution
0.1/1 mG or 0.01/0.1 µT
Frequency
response
30Hz to 300Hz
Sensor
Single Axis
Accuracy
±(2.5%±6dgt) at 50Hz/60Hz
Over Load
Indicator
LCD displays “OL”
Sample Rate
2.5 times per second
Battery
9V
Battery Life
Approximate 100 hours
Weight
About 170g
Dimensions
130(L) x 56(W) x 38(H)mm

11
anaheimscientific.com Technical data subject to change without notice
©Anaheim Scientific 2013. 20130719
9 Service, Repairs, Calibration
•The following are instructions regarding policies for
servicing, repairing or calibrating Anaheim Scientific
products. Turnaround time is usually less than ten
(10) working days unless expedited service is
requested and pre-arranged.
•Send an email to [email protected]
requesting an RMA number specifying your request
for either service/repair and/or calibration with your
product’s model number.
•Once you receive a reply from
[email protected], you will be asked
to ship prepaid to the address below. Package the
unit carefully using filler or bubble wrap, and if
possible, ship in the original box. Ship each unit
separately. (Anaheim Scientific is not responsible for
any shipping damage that may occur.)
•Include a packing list with each unit shipped stating
what type of service is required and include the
return shipping information: name, address and
telephone number.
•If the unit is in warranty, please provide the following:
proof of purchase or copy of the original invoice.
•If the unit is out of warranty, prepayment is required
by Check, Money Order or Credit Card.
•Return all merchandise to Anaheim Scientific with
pre-paid shipping. The flat-rate repair charge for
Non-Warranty Service does not include return
shipping. Return shipping to locations in North
American is included for Warranty Service.

12
anaheimscientific.com Technical data subject to change without notice
©Anaheim Scientific 2013. 20130719
•For overnight shipments and non-North American
shipping fees please contact Anaheim Scientific
Anaheim Scientific
ATTN: Service/Repair
22820 Savi Ranch Parkway
Yorba Linda, CA 92887
www.anaheimscientific.com

13
anaheimscientific.com Technical data subject to change without notice
©Anaheim Scientific 2013. 20130719
10 Limited Two-Year Warranty
•Scientific warrants to the original purchaser that its
products and the component parts thereof, will be
free from defects in workmanship and materials for a
period of two years from date of purchase.
•Anaheim Scientific will, without charge, repair or
replace, at its option, defective product or
component parts. Returned product must be
accompanied by proof of the purchase date in the
form of a sales receipt.
•To help us better serve you, please complete the
warranty registration for your new instrument via our
website www.anaheimscientific.com
•Exclusions: This warranty does not apply in the
event of misuse or abuse of the product or as a
result of unauthorized alterations or repairs. The
warranty is void if the serial number is altered,
defaced or removed.
•Anaheim Scientific shall not be liable for any
consequential damages, including without limitation
damages resulting from loss of use. Some states do
not allow limitations of incidental or consequential
damages. So the above limitation or exclusion may
not apply to you.
•This warranty gives you specific rights and you may
have other rights, which vary from state-to-state.

14
anaheimscientific.com Technical data subject to change without notice
©Anaheim Scientific 2013. 20130719

15
anaheimscientific.com Technical data subject to change without notice
©Anaheim Scientific 2013. 20130719

16
anaheimscientific.com Technical data subject to change without notice
©Anaheim Scientific 2013. 20130719
22820 Savi Ranch Parkway
Yorba Linda, CA 92887
www.anaheimscientific.com
© 2013 Anaheim Scientific