#( 7$4 C
7$0 C
B( # 9H40+0 0
!$0%
0G00
&( 0 0
$0
*CAUTION: DO NOT REMOVE THE PRINT HEADS FROM THEIR
CRATE(S). This will be supervised by the installing technician.
Damage may be caused to the head keypad, screen holder
extrusion, and electrical cables. You may remove the top of the
head crate(s), but leave the print heads in the crate.
3( =$!
!$F;3&
0 $
!(<F'%;
# 0$
*SOME MACHINES WILL BE WIRED 115/120 VAC, 2A, 60Hz. – an
electrician will be required for this standard connection. However,
all Flash Units are at least 208-240VAC, either single or 3 phase
and should be connected by a qualified electrician.
1.2 Installation Requirements
anatol.com 6
