Andatech Ionmax Selah ION360 User manual

ION360
SELAH

Thank you for purchasing the Ionmax Selah ION360 UV HEPA Air Purier. The Ionmax Selah can help
to improve the indoor air quality in your home or ofce.
Please read this manual carefully before use to ensure proper usage and save these instructions for
future reference.
This package includes:
●Ionmax Selah ION360 Air Purier
●User Manual
Note: Remove plastic bags from air purier and lter before rst use.
SAFETY INSTRUCTIONS 3
PRODUCT DIAGRAM 4
SPECIFICATIONS 4
PURIFICATION SYSTEM 5
CONTROL PANEL 6
OPERATING INSTRUCTIONS 7
MAINTENANCE INSTRUCTIONS 8
FILTER REPLACEMENT 8
TROUBLESHOOTING GUIDE 9
WARRANTY DETAILS 10
WARRANTY REGISTRATION 11
DEAR CUSTOMER SAFETY INSTRUCTIONS
CONTENTS

SAFETY INSTRUCTIONS
PLEASE READ ALL THE TIPS AND WARNINGS BELOW
BEFORE USING THE AIR PURIFIER
●Use only as directed in the User Manual.
●Do not allow children or persons with reduced physical, sensory, or mental capabilities to operate
the unit without adult supervision.
●Only designed for use in a 220-240V, 50/60Hz outlet.
●This product is intended for domestic indoor use only.
●Only operate the unit when it is fully assembled.
●Never touch the unit with wet hands or allow it to come into contact with water.
●Turn off all controls before unplugging the power supply.
●Always disconnect the unit from the power supply before moving or cleaning the unit, and when the
unit is not in use.
●When removing the power plug, always hold the plug and never pull the cord.
●This air purier is not a substitute for proper ventilation, regular vacuum cleaning or an extractor
hood or fan while cooking.
●Leave at least 30cm of space behind and on both sides of the unit and leave at least 30cm space
above the unit.
●Do not use the unit in bathrooms, kitchens, humid areas, near replaces, or place it in proximity to
ammable or combustible products, as electric shock and a re hazard may result.
●Do not clean the unit with water or any other liquid including ammable products.
●Do not run power cord under carpeting, or cover with rugs or runners. Arrange the cord away from
areas where it may be tripped over.
●Never operate the unit if the plug or cord appears damaged. Contact the authorised distributor or
qualied personnel immediately for examination and repair.
●Do not insert ngers or foreign objects into the air intake or air outlet, or block them by placing
items on the air outlet or in front of the air intake.
●Do not place anything on top of the unit and do not sit on the unit.
●Do not place the unit directly below an air conditioner as condensation may drip into the unit.
●Do not operate this unit when using indoor insect repellents (aerosols) or in places with oily
residues, burning incense or chemical fumes.
●Do not use the unit in a room with major temperature changes, as this may cause condensation
inside the unit.
3

PRODUCT DIAGRAM PURIFICATION SYSTEM
Model Ionmax ION360
Voltage 220-240V, 50/60Hz
Power Rating 45W
Coverage Area Up to 15 m2
Germs Killed 99%
Noise Level Low: 30dB, High: 55dB
Air Flow 60CFM (102m3/h)
Filter Life 6 months (based on typical use)
Weight 2.78 KG
Dimensions 202 (W) x 204 (D) x 330 (H) mm
SPECIFICATIONS
Air Outlet
3-in-1 Filter (includes
Pre-lter, HEPA Filter,
and Carbon Filter)
Negative Ioniser
Air Inlet
Touch Panel
Main Unit
UV-C Light
Screw Cap
Base
4

PURIFICATION SYSTEM
The Pre-Filter, HEPA Filter and Activated Carbon Filter are combined into one easy-to-change lter.
1. Pre-Filter
Traps large particles such as human hair, pet dander and dust particles. Helps to extend the life of
the HEPA and Activated Carbon lters.
2. HEPA Filter
Traps up to 95% of allergens and airborne contaminants down to 0.3 microns in size. These
allergens include lung damaging dust, mould spores, plant spores, pet dander and pollen.
3. Activated Carbon Filter
Absorbs and neutralises odours and other Volatile Organic Compounds (VOC’s) such as
formaldehyde and benzene, as well as other harmful fumes emitted by household products.
4. UV-C Light (254nm)
Destroys 99% microorganisms such as germs, viruses, bacteria and fungi (such as mould toxins).
5. Negative Ions
Improve indoor air quality by combining with dust or reacting with odour molecules and removing
them from the air we breathe.
5

OPERATING INSTRUCTIONS
CONTROL PANEL
“POWER” BUTTON
Press this button to turn the air purier on or off.
Note: Press and hold Power Button for 3-5 seconds to reset the Filter Reset Indicator.
“TIMER” BUTTON
The air purier can be timed to operate for intervals of 2, 4, or 8 hours, stopping automatically when
the selected operating time has elapsed.
To select continuous operating mode, press the button repeatedly until all three timer lights are off.
IONUV-C IONUV-C IONUV-C
UV-C OnUV-C On
Ioniser On Ioniser On
IONUV-C
“UV/ION” BUTTON
Press this button to turn the UV lamp and ION function on or off.
6

OPERATING INSTRUCTIONS
Note: Remove plastic bags from air purier and lter before rst use.
1. Plug the appliance into a suitable electrical outlet.
2. Ensure the appliance is placed on a stable, at and level surface.
Note: For proper air ow, ensure the appliance is 30cm away from any wall or furniture and ensure
that the air inlet and outlet is not blocked.
3. Press the power button to turn the appliance on.
4. Change the timer, fan speed, or UV/ION settings if desired (refer to Control Panel description).
5. Press the power button to turn the appliance off.
Important note: When the unit is not in use, switch it off and unplug it.
Turbo
“SPEED” BUTTON
The fan speed of the unit can be adjusted between Low (I), Medium (II), High (III) and Turbo when the
unit is in operation.
The corresponding fan speed indicator will light up to indicate the current fan speed.
Note: If Turbo is selected, all the three fan speed indicators will light up.
FILTER REPLACEMENT See page 8.
7

CLEANING THE UNIT
●Always unplug the power supply before cleaning the unit.
●Do not put the unit into water or use water to wash it directly.
●Do not use any corrosive or ammable detergent to clean the unit.
●Use a soft cloth with mild cleanser to clean the unit, and make sure the unit is completely dry after
cleaning.
●Regularly clean the inside and surface, to prevent dust from gathering.
●Regularly clean the air intake and air outlet.
●To maintain or replace lters, see below.
STORAGE INSTRUCTIONS
If the unit will not be in use for a long time, please pack and store it properly:
●Unplug the power supply of the unit.
●Clean the lter.
●Use a soft cloth to clean the air intake and air outlet.
CAUTION
●Proper use and regular maintenance can ensure efcient operation and extend the life of the unit.
●Do not attempt to repair or adjust any electrical or mechanical functions on this unit. All servicing
should be performed by qualied personnel only.
MAINTENANCE INSTRUCTIONS
FILTER RESET INDICATOR
When the “FILTER RESET” indicator turns red during operation, it indicates that the 3-in-1 lter needs
to be replaced.
Follow the instructions below on replacing the lters.
Note: The 3-in-1 lter can be used for about 6 months if used continuously, but its actual life depends
on air quality condition and proper maintenance.
REPLACING THE FILTERS
1. Ensure the unit is switched off. Turn the unit upside down.
2. Unscrew and remove the screw cap on the base of the unit.
3. Remove the base of the unit and remove the old lter.
4. Replace with a new lter (remove any plastic packaging beforehand).
5. Reattach the base onto the unit and fasten it with the screw cap.
FILTER REPLACEMENT
8

6. Position the unit back on to its base.
7. Press the power button to switch the unit on. Then, press and hold the power button for 5 seconds
to reset the “FILTER RESET” indicator light.
TROUBLESHOOTING GUIDE
Problem Probable Cause Solution
Unit not
operating
Power cable not plugged in Plug in power cable
Power cable not plugged in properly Plug in power cable correctly
Loud noise
Filter not unpacked from plastic bag Unpack the lter packaging
Filter is dirty Clean or replace the lter
Abnormal
noise
Loose parts inside the unit Contact customer service centre
Motor broken
Indicator
lights not
switched on
Product circuit control failure Contact customer service centre
UV-C or ION
indicator light
is off
UV-C or ION is switched off Press the UV/ION button
UV-C or ION light is broken or needs
replacement
Contact customer service centre
Reduced
airow
Filter is dirty Clean or replace the lter
Filter is dirty Unpack the lter packaging
FILTER MAINTENANCE
●The 3-in-1 lter is not washable.
●Do not use any solutions, brushes or sharp objects to clean the lter, as this can damage it.
●It can be gently vacuumed using hand tool attachments (no rotating brushes) once a month.
9

WARRANTY DETAILS
Congratulations on your purchase! It is our aim to provide you with quality products that you can
trust. Our products come with guarantees that cannot be excluded under the Australian Consumer
Law. You are entitled to a replacement or a refund for a major failure and for compensation for any
other reasonably foreseeable loss or damage. You are also entitled to have the goods repaired or
replaced if the goods fail to be of acceptable quality and the failure does not amount to a major failure.
The Guarantee
The product is guaranteed to be free from defects in workmanship and parts for a period of 12 months
from date of purchase. Defects that occur within this warranty period, under normal use and care, will
be repaired, replaced or refunded at our discretion, solely at our option with no charge for parts and
labour. The benets conferred by this warranty are in addition to all rights and remedies in respect of
the product that the consumer has under the Trade Practices Act and similar state laws.
Proof of Purchase
This warranty is valid for the original purchase and is not transferable. Please keep your purchase
docket or receipt as proof of purchase and as proof of date on which the purchase was made. The
purchase docket (or a copy) or receipt must be presented with the warranty when making a claim
under this warranty.
Service during the Warranty Period
To claim for warranty, contact us on 1300 800 200 or [email protected] to get an RA#
(Return Authorisation Number) or submit a support ticket on my.andatech.com.au. Ensure that the
RA# is clearly stated on the outside of the packaging and that the product is properly packaged so that
no damage occurs to the product during transit. Shipping of the product back to us for warranty will be
at your cost. A product return without the RA# or proof of purchase will not be accepted.
Extent of Warranty
This warranty is limited to defects in workmanship or parts. All defective products or parts will be
repaired or replaced. This warranty does not cover manuals and packaging.
Normal Wear and Tear
This warranty does not cover normal wear and tear to the product or parts.
Exclusions
This warranty does not cover:
• Any defect caused by an accident, misuse, abuse, improper operation, lack of reasonable care,
unauthorised modication, loss of parts, tampering or attempted repair by a person not authorised
by the distributor.
• Any product that has been damaged by a lightning strike either directly or indirectly or a main power
surge or liquid ingress.
• The product if it is located outside of Australia.
• Any damage caused by improper power input or improper cable connection.
Andatech Pty. Ltd.
PO Box 3038, Nunawading VIC 3131, Australia.
Phone: [phone] Fax: [phone] Email: [email protected]
10

Product : Ionmax Selah Ion360
Date of Purchase : ____________________________________
Place of Purchase: ____________________________________
Serial No. : ____________________________________
Surname : ____________________________________
Given Name : ____________________________________
Address : ____________________________________
Suburb : ____________________________________
Postcode : ____________________________________
State : ____________________________________
Contact No. : ____________________________________
Email : ____________________________________
WARRANTY REGISTRATION
Register your Ionmax Selah Ion360 online at my.andatech.com.au or ll out this
form and forward to the address below with a copy of your proof of purchase.
Contact us on 1300 800 200 or email [email protected] for options to
extend your warranty.
Andatech Pty Ltd
PO Box 3038, Nunawading VIC 3131, Australia.

andatechdistribution.com.au
1300 800 200
Version 1.0. Updated July 2020.