Andrew James AJ000681 User manual

Please read the manual fully before using the appliance and keep the
manual safe for future reference.
Food Processor and Blender
Pour la version française veuillez consulter notre site de web
www.andrewjamesworldwide.com
Die deutsche Version nden Sie auf unsere Webseite
www.andrewjamesworldwide.com

2
Safety Guide
When using any electrical
appliance, basic safety
precauons should always be
followed, including:
This appliance can be used by
children aged from 8 years and
above and persons with
reduced physical, sensory or
mental capabilies or lack of
experience and knowledge if
they have been given
supervision or instrucon
concerning use of the
appliance in a safe way and
understand the hazards
involved. Children shall not
play with the appliance.
Cleaning and user maintenance
shall not be made by children
unless they are older than 8
and supervised. Keep the
appliance and its cord out of
reach of children less than 8
years old.
Always ensure the voltage on
the rang label corresponds to
the voltage in your home.
Check the power cord and
plug regularly for any
damage. If the cord or the
plug is damaged, it must be
replaced by a qualied
electrician or a service repair
centre. If in doubt please
contact our customer service
team.
The appliance is intended for
domesc use only. Industrial
or commercial use will void
the warranty. The supplier
cannot be held responsible
for injury or damage if the
appliance has been used for
anything other than its
intended use.
Incorrect operaon and use
can damage the appliance
and cause injury to the user.
Do not use the appliance if it
has been dropped or
damaged in any way. If the
unit has been damaged take
the unit for examinaon and

3
or repair by an authorised
service agent.
Do not immerse or expose the
motor assembly, plug or the
power cord in water or any
other liquid for any reason.
If the supply cord is damaged,
it must be replaced by the
manufacturer or by someone
who is suitably qualied to
avoid a potenal hazard.
Do not let the cord hang over
the edge of a table or counter.
Ensure that the cord is not in a
posion where it can be pulled
or tripped over accidentally.
Do not allow the cord to touch
hot surfaces and do not place
the cord near hot gas, electric
burners or in a heated oven.
Use of an extension cord with
this appliance is not
recommended. However if it is
necessary to use an extension
cord, ensure that the
extension cord is equal to or
greater than the power
consumpon of the appliance
to avoid overheang of the
appliance and extension cord.
Do not use any other
appliance on the extension
cord. Do not place the
extension cord in a posion
where it can be pulled on by
children or animals or be
tripped over.
Always operate the appliance
on a smooth, even and stable
surface. Do not place the unit
on a hot surface.
Always remove the plug of
the appliance safely. Do not
pull on the appliances cord to
remove the appliance plug
from the electrical socket.
Never handle or operate the
appliance with wet hands.
Appliance specic safety
instrucons
Only use the appliance for a
maximum of 2 minutes. Allow

4
the appliance to cool for a
short period aerwards.
Aer using the appliance for
more than 5 x 2 minute
periods allow the appliance
to cool for 90 minutes.
Clean all parts and accessories
that come into contact with
food before rst me use.
Never exceed the maximum
quanes stated on the bowl.
Never leave the appliance
unaended while it is in use.
Never touch parts of the
appliance whilst they are
moving.
Refrain from pung utensils
or ngers inside the lid
opening.
Never press down ingredients
into the feed opening with
your hands.
Do not use the appliance for
hard ingredients such as
frozen meats, cheese, bones
etc.
Always ensure the appliance
is turned o before removing
the lid and any aachments.
Always remove the blades
before removing the
ingredients from the bowl.
Demonstrate care when you
are handling, ng, cleaning
or removing the blades from
the food processor.
Switch o the appliance and
remove all accessories before
cleaning.
The appliance has an
incorporated protecve
device to protect the
appliance against high
temperatures. If the
temperature becomes too
high the appliance will
automacally turn o and will
resume operaon once the
appliance has fully cooled
down (Approx. 15 minutes).
Do not push food down the
chute with ngers or other

5
objects such as knives, always
use the pusher provided with
the processor.
Appliance Illustraon
6.
1. Motor Base 2. Drive Axis 3. Bowl
4. Blade Adapter 5. Bowl Cover 6. Food Pusher
7. Disc Holder 8. Slicing Disc 9. Shredding Disc
10. French Fry Disc 11. Chopper 12. Kneading Disc
13. Emulsifying Disc 14. Citrus Fruit Plate 15. Citrus Juicing Head
16. Blending Measuring Cup 17. Blending Cover 18. Blending Jug
5.
15.
14.
4.
3.
2.
1.
10.
9.
8.
7.
13.
12.
11.
16.
17.
18.

6
Before rst me use
Unpack the appliance and remove all
packaging.
Disassemble the unit before rst me
use.
Wash all parts of the appliance before
rst me use. Refer to cleaning and
maintenance.
Do not immerse the motor unit (1) in
water.
Chopping
1. Place the drive axis (2) onto the motor
base (1). Ensure that the drive axis (2)
ts into the ridges in the motor base (1).
2. Posion the bowl (3) onto the drive axis
(2) and rotate it clockwise unl it locks
into the motor base (1).
3. Fit the blade adaptor (4) onto the
drive axis (2) inside of the bowl (3).
4. Fit the chopper blade (11) onto the
blade adaptor and turn unl it locks
into place.
5. Place the bowl cover (5) onto the bowl
(3) and rotate it clockwise unl a
“clicking” sound can be heard. This
signals that the lid has been securely
ed.
6. Turn the appliance on by rotang the
speed dial on the motor base (1) to
seng 1 or 2.
7. Place the ingredients into the feeding
tube and press down gently using the
food pusher (6).
Food Maximum per batch
Chocolate 100g
Cheese 200g
Meat 500g
Spices 50-100g
Fruit & Vegetables 100-300g
Onion 500g
Recommended amounts

7
Kneading Disc
1. Place the drive axis (2) onto the motor
base (1). Ensure that the drive axis (2)
ts into the ridges in the motor base (1).
2. Posion the bowl (3) onto the drive axis
(2) and rotate it clockwise unl it locks
into the motor base (1).
3. Fit the blade adaptor (4) onto the drive
axis (2) inside of the bowl (3).
4. Place the kneading disc (12) onto the
blade adaptor (4).
5. Turn the kneading disc (12) unl it locks
into place.
6. Place the dough ingredients into the
bowl (3).
7. Place the bowl cover (5) onto the bowl
(3) and rotate it clockwise unl a
“clicking” sound can be heard. This
signals that the lid has been securely
ed.
8. Place the pusher (6) into the feeder
tube and plug the appliances cord into
the electrical socket. Turn the speed dial
to “1” or “2”.
Note:
Always aach the kneading disc in the
bowl before starng the appliance.
Knead for between 30-90 seconds.
Recommended amounts
Blender
Ensure that the motor base (1) is
securely placed on a at level surface.
Place the ingredients into the blending
jug (18).
Aach the blending jug (18) to the
motor base (1) by rotang it clockwise
unl it is fully locked into posion.
Place the blending cover (17) onto the
blending jug (18).
Plug the appliance into the electrical
socket. Turn the appliance speed to
the required seng.
Slicing / Shredding / French Fry Disc
Assembly
1. Place the drive axis (2) onto the motor
base (1). Ensure that the drive axis (2)
ts into the ridges in the motor base
(1).
2. Posion the bowl (3) onto the drive
axis (2) and rotate it clockwise unl it
locks into the motor base (1).
3. Posion the required disc (8/9/10) in
the disc holder (7).
4. Fit the disc holder (7) onto the drive
Food Maximum per batch
Flour 400g
Egg 5

8
axis (2).
5. Place the bowl cover (5) onto the bowl
(3) and rotate it clockwise unl a
“clicking” sound can be heard. This
signals that the lid has been securely
ed.
6. Place the ingredients into the feeder
tube and start the appliance by turning
the speed seng to 1 or 2.
7. Place the pusher (6) into the feeder
tube to feed the ingredients into the
appliance.
Note:
Choose the required disc according to
the ingredients and the desired shape of
the food.
Always push soly down on the feeding
tube.
It is recommended to pre-cut food to a
smaller size.
Choose a low speed seng and increase
gradually if required.
Citrus Juicer
1. Place the drive axis (2) onto the main
base (1).
2. Posion the bowl (3) onto the drive axis
(2) and rotate it clockwise to t it
correctly onto the main base (1).
3. Place the citrus juicing plate (14) on the
bowl (3) ensuring that the clip of the
juicing plate fully ts into the locking
system of the bowl.
4. Cut the fruit in half in preparaon for
juicing.
5. Turn the appliance on and set the
speed seng to 2. Press the citrus
halves onto the rotang citrus juicing
head (15) to juice the fruit.
Emulsifying Disc
1. Place the drive axis (2) onto the main
base (1).
2. Posion the bowl (3) onto the drive
axis (2) and rotate it clockwise to t it
correctly onto the main base (1).
3. Place the blade adaptor (4) onto the
drive axis (2).
4. Fit the emulsifying blade (13) onto the
blade adaptor (4).
5. Turn the emulsifying blade (13) unl it
locks into place.
6. Place the bowl cover (5) onto the bowl
(3) and rotate it clockwise unl a
“clicking” sound can be heard. This
signals that the lid has been securely
ed.
7. Place the ingredients into the feeder
tube and start the appliance by
turning the speed seng to 1 or 2.
Food Maximum Time per batch
Egg 2-5 30-60 sec
So
Cheese
350g 20 sec

9
Cleaning
Always unplug the processor from the
power outlet before cleaning the
appliance.
Clean the power unit with a so, damp
cloth. Do not put the power unit under
running water and do not submerge it in
water or any other liquids.
All accessories should be washed by
hand. They are not dishwasher safe. For
hand washing use tepid water and
normal detergent. Do not use chemical
or abrasive washing up liquids.
Store the appliance in a dry area,
preferably in its original box.
Troubleshoong
Problem Soluon
The appliance does not work Ensure that the appliance is correctly assembled.
Make sure the plug is correctly installed into the
electrical socket.
Check if the mains has tripped or this is a power
outage.
Machine suddenly stops running The bowl may be loose due to vigorous processing.
Please re-install the bowl cover.
The motor is running, but the Make sure that the drive axis is correctly installed.

10
UK and EU Guarantee
Your new Andrew James product comes
with a 24 month guarantee and a 2 year
xed warranty, eecve from receipt con-
rmaon. Your receipt or order number is
required as proof of purchase date so it is
imperave that you keep it safe. This guar-
antee only applies if the item has been
used solely for the use intended, and all
instrucons have been followed according-
ly. Please note this product is only for do-
mesc use only and is not for commercial
use.
Abuse of your product will invalidate the
guarantee. Returned goods can only be
accepted if repackaged properly within the
original colour product box, and presented
with the original receipt of sale / order
number. This does not aect your statuto-
ry rights.
Returned products must be cleaned and
returned to us in as close to delivery condi-
on as possible.
If your product develops a problem within
the rst 12 months of the xed warranty,
we will pay all shipping costs to have it
returned to us. Aer 12 months the cus-
tomer will be liable for the cost of return-
ing the product to us. We will then pay to
have the repaired/replaced item shipped
back to the customer.
If you wish to return your item for a full
refund, you have the right to do so within
the rst 7 days. For our returns policy
please go to:
www.andrewjamesworldwide.com
Customers are responsible for any taxes
applied to our products when they are
shipped outside of the EU.
All of our prices are inclusive of VAT.
Once a product has been returned to us,
we will aim to repair or replace it within
30 days of receipt.
The guarantee does not cover any defect
arising from improper use, damage, build
-up of lime scale or repair aempts made
by third-pares. Also, the guarantee does
not cover normal wear and tear of indi-
vidual parts.
Electrical Informaon
Always ensure the voltage on the rang
label corresponds to the power supply
where the product is being used.
Class II double insulaon. This tool is
double insulated therefore no
earth connecon is required.
Precauons should be followed for safe
cable management and connecon to the
power supply
If a new mains plug needs to be ed
follow the ng instrucons supplied
with good quality BS1363A plugs. If in
doubt consult a qualied electrician or
appliance repair agent.
Warning! For double insulated product
no connecon is made to the Earth termi-

11
nal.
Recommended fuse: 13A
If an extension cable is required, a 2 core
or 3 core (earthed) extension can be used.
To avoid overheang the extension cable
should be rated no less than 13A and be
fully unwound before use.
Do not aempt to modify electrical plugs
or sockets or aempt to make an alterna-
ve connecon to the electrical supply.
Disposal of the appliance
Waste Electrical & Electronic Equipment
(WEEE) Waste & Recycling
Disposal of Electrical and Electronic
Waste
Non-household waste. This product must
not be disposed of together with ordinary
household waste.
Separate collecon of used products,
baeries and packaging allows the recov-
ery and recycling of materials. Reuse of
materials helps prevent environmental
polluon and reduces the demand for raw
materials.
Local authories, retailers and collecon
organisaons may provide for separate
collecon of electrical products, baeries
and packaging.
Safely dispose of the old plug.
Connect the brown lead to the live
terminal “L” in the new plug.
Connect the blue lead to the neutral
“N” terminal.

12
Contact details
Andrew James UK LTD
Unit 1
P C Henderson Premises
Bowburn North Industrial Estate
Bowburn
Co Durham
DH6 5NG
Customer Service / Technical Support
Telephone: 0844 335 8464
Email: customerservices@andrewjamesworldwide.com
Web: www.andrewjamesworldwide.com
Twier: @andrewjamesltd
Facebook: Andrew James
Copyright Andrew James
Pour la version française de ce noce veuillez visiter notre site:
www.andrewjamesworldwide.com
Bie nden Sie die deutsche Version dieser Bedienungsanleitung auf unserer
www.andrewjamesworldwide.com
AJ000681 / AJ000682
09/2016
This manual suits for next models
1
Table of contents
Other Andrew James Food Processor manuals