Anern AN-SLN02 User manual

Product Name LED Street Light
Product No AN-SLN02
Manual No 11
Date 2021
Anern Industry Group Limited
Web: anerngroup.com | Email: [email protected] | WhatsApp: [phone]

Feature
Anern Industry Group Limited
Philips / CREE 3030 Chip
150lm/w
5 years warranty driver
MeanWell / Moso Optional
Extra Photocell
Sensor Available
(optional)
Web: anerngroup.com | Email: [email protected] | WhatsApp: [phone]

Feature
Anern Industry Group Limited
Web: anerngroup.com | Email: [email protected] | WhatsApp: [phone]

Specification
Anern Industry Group Limited
Model
AN-SLN02
Power
60W
80W
100W
150W
200W
LED Chips
(PHILIPS)
72
72
144
144
240
Luminous
Efficiency
6000-6600lm
8000-8800lm
10000-
11000lm
15000-
16500lm
20000-
22000lm
Voltage
AC85-265V
PF
≥0.95
CRI
Ra>80
Color
Temperature
3000-6500K
Bean Angle
horizontal >150°, vertical >75°
Working
Temperature
-30℃ ~ +50℃
Working
Humidity
<85%RH
Guard Level
Ip66
Warranty
3year
Web: anerngroup.com | Email: [email protected] | WhatsApp: [phone]

TEST
Anern Industry Group Limited
h The working voltage is AC90-305V. Please ensure the voltage when connected the power supply. The
light would be destroyed permanently if connected with higher voltage.
h After connecting with the power supply, no contact between the relative metal and the light base to
prevent electric shock.
h After unwrapping the package or before using it, please check whether it is destroyed due to
transportation.
h If there is any damage, please stop using it and inform supplier. The product only could be used under
intact conditions.
h To ensure the product could be used normally, please strictly follow the introduction and attentions. The
supplier shall not be responsible due to any of the damage caused by illegal operation.
h Please don’t connect the LED street light and power supply in high temperature condition. The lifespan
would be shorter when it is employed under the higher temperature. Please also maintain the street lights
with water washing periodically for better heat dissipations.
h Before installing, please ensure the environment is suitable and it is recommended that it should be
installed on stable place in case of vibration.
h Due to the temperature of the lamp’s surface could reach to 50, it is recommended that there is no
devices which is sensitive to heat. To ensure the suitable working temperature, please keep it from heat
resources!
Web: anerngroup.com | Email: [email protected] | WhatsApp: [phone]

Our Factory
Anern Industry Group Limited
Web: anerngroup.com | Email: [email protected] | WhatsApp: [phone]