Angelo Decor Pond Building AD43110 User manual

TROUBLESHOOTING
CAUTION: Unplug the device before handling.
If the unit fails to light:
1. Check the power supply using another electrical device.
2. Ensure the light cord plug socket is properly seated and tight to the transformer.
3. Ensure the bulb is properly seated into the socket.
Note: A bulb replacement may be necessary.
CLEANING AND MAINTENANCE
When a reduction in light performance is noted, the need for cleaning is the most common
reason. Cleaning intervals depend on the environment of use.
Over time, the bulb may need replacement, and we suggest doing this seasonally.
This bulb is a standard item available at various retailers.
For your convenience, a replacement bulb and lens are included in this package. They are
also available on the replacement parts section of our website.
If moisture is noticed inside the lens, disassemble the unit, allow to dry, and
reassembly properly to insure the protective ring makes a complete seal.
We recommend inspecting the unit annually for any damage to the cord or electrical
supply. Unit should be properly stored for winter.
LIMITED WARRANTY
This item is warranted to the original user against defective materials and workmanship
for a period of 90 days. Warranty does not cover replaceable materials such as light
bulbs or lenses. Our limited warranty does not cover any costs associated with the
installation or removal of products subject to warranty claims or the cost of return of the
item. The warranty will commence from the date of purchase. Replacement liability is
limited to any part or parts of the unit which have failed due to defective material or
workmanship. Proof of purchase is required for all claims against the limited warranty.
This warranty does not extend to damage of the product or part resulting from accident,
misuse, alteration, neglect, abuse, improper installation or normal wear and tear to the
product(s). This limited warranty extends only to the original user of the product.
10 Watt Fountain Accent Light
COMPONENTS
1. Light with rubber
base, glass lens,
bulb, light cord
with plug socket
and cap.
2. CUL Transformer
Power Plug.
3. Replacement 10
watt bi-pin
halogen bulb and
glass lens.
INTENDED USE:
This light is primarily intended for use fully submersed in a fountain,
water feature, or pond.
It is designed for fresh water use only.
The transformer is weatherproof, but MUST NOT BE SUBMERSED in water.
Diagram #1 above will assist in ordering replacement parts, and help you identify the
components required to assemble and maintain the unit as described below.
QUESTIONS?
PLEASE DO NOT RETURN THIS PRODUCT TO THE STORE.
Visit our website (www.angelodecor.com) for more information and videos on how to
assemble and properly use your product.
For more information on this and other products, please visit our web site:
www.angelodecor.com
To contact us regarding this unit, your options include:
Email:[e-mail] | Phone: (780) 453 - 6646 | Fax: [phone]
Angelo Décor International Inc. | 15840 –118th Avenue | Edmonton, AB |T5V 1C4
AD43110
01
02
03

WARNING: IMPORTANT SAFETY INFORMATION:
Inspect before use for any damage to the unit or power cord. Any damage or
missing parts should be reported immediately and before attempting use. Units
with ANY damage to the power cord should not be used. Contact us for
replacement.
Failure to follow these instructions and warnings may lead to product damage or
personal injury of which Angelo Décor International Inc. will not be held
responsible or liable.
1. NEVER leave children unsupervised or out of sight around ANY pond
environment.
2. Always unplug power from lights, pumps or other electrical devices BEFORE
putting hands in water, or if service and maintenance is performed.
3. Always use properly grounded (GFCI) electrical equipment and a drip loop on any
power cords to prevent water from travelling along the cord.
4. Keep the power cord away from high temperatures.
5. Do not exceed the voltage as indicated on the transformer.
6. Do not submerse the transformer in water.
7. Allow light to cool before handling or disassembling.
8. Always use a cloth when handling the lens or bulb. Oil from your skin can
damage the halogen bulb.
9. Do not use near flammable liquids.
10. Do not use in temperatures below 30Celsius as freezing damage may occur.
TIPS BEFORE INSTALLATION
Ensure the lens is clean, free from
debris, and forms a tight seal around
the rubber base of the unit.
Assess the angle and placement you
will require before placing unit in water feature.
Choose an area for your transformer that will protect it from heat sources, excess
water, dirt and debris.
Use landscape materials such as stones to hide excess cord, taking care not to
puncture or damage the cord in any way.
INSTRUCTIONS FOR USE
1. Install cord in water feature on a surface with unobstructed access to the area you
wish to illuminate, keeping plug socket end out of water.
2. Attach the light cord plug socket firmly
to the transformer.
3. Screw the socket cap nut on hand tight.
4. Plug transformer into a GFCI outlet, KEEPING IT OUT OF THE WATER.
REPLACING THE 10 WATT HALOGEN BULB
DISCONNECT UNIT FROM POWER SUPPLY BEFORE HANDLING
Allow unit to cool before attempting to change the bulb. Please use a cloth when handling
the bulb as oils from your skin can damage the bulb.
1. Carefully remove the glasslens by gently
turning and pulling the lens.
2. Gently unplug the bulb from the housing
socket.
3. Replace the bulb.
4. Reassemble the unit, ensure the lens is
clean and forms a tight seal.