hentech HT001BL-T1 User manual

Instruction Manual for LED Underwater Light Bulb
Models: HT001BL-T1, HT001SL-T1
Manufacturer: Hentech Technology Development Co., LTD
Add: No. 58 Tianren Industrial Estate, Liandu Village, Leliu Town, Shunde District,
Foshan City, Guangdong, China 528322
Telephone: [phone]
Fax: [phone]
Website: http://www.hentech.ca
IMPORTANT: This manual includes essential information on the safety measures to be
implemented for installation and start-up. Therefore, the installer, as well as the user,
must read these instructions before beginning installation and start-up.
Technical Specification
Standard input voltage: 12V AC/DC (Range: 12~18VAC or DC)
Standard input watt:
RGB / White
722 LED
4W/5W
252 LED
14W/17W
546 LED
28W/33W
Use life: 60,000 hours
16 programs with Synchronization capability
Dimensions:
Model: HT001BL

Model: HT001SL
Instruction & Use
This is a high technology electronic controlled light based on LED’s in three colors: red, green
and blue. These three base colors together can produce many other colors to create the
perfect atmosphere in the pool. Any of the 16 pre-programmed effects can be selected with
the on/off switch of your pool lights. The LED’s can also be warm white only or natural white
only. The LED’s are driven by constant current. The technology of True PWM is adopted on
the lights. High temperature protection makes the LED’s be protected while the internal
temperature reaches a high level. All these technologies guarantee long working life of the
LED lamps.
16 Programs of RGB LED Bulbs
1. White: sun white
2. Red: one color red
3. Green: one color green
4. Blue: one color blue
5. Green-blue: fixed color green/blue
6. Red-green: fixed color red/green
7. Blue-red: fixed color blue-red
8. Evening sea: slow animation red/blue
9. Evening rivers: slow animation red/green
10. Riviera: slow animation green/blue
11. White: neutral white
12. Rainbow: slow animation blue/red/green
13. River of colors: program 12, followed by program 15
14. Disco: fast animation
15. Four seasons: slow animation in red/blue/green/violet
16. Party: fast animation
Installation
Easily replace the existing bulb which has a E27 base, by screwing the new bulb into the E27
base of your swimming pool light.

Maintenance & Replacement
There is no maintenance required for this lamp –it is designed to be used only once, meaning
that replacement is necessary if it becomes defective (repairing is impossible). Before any
handling, ensure that there is NO voltage supplied to the lamp. To replace, unfasten the lamp
from the base. Ensure the new lamp is of the same model and characteristics as the one being
replaced.
Start-up
• In case of colored lamps, 16 pre-programmed effects and combinations may be selected using
the on/off switch of your pool lights. Just switch off and switch on within 2 seconds.
•If the light is powered off for more than 20 seconds, it will keep the latest program when it is
turned on again.
• To achieve synchronization, confirm all lamps are installed correctly on the same switch, after
they are powered off for more than 20 seconds, switch on and switch off continuously three
times, and then finally turn them on again. They will all go to program 5. Now you can select a
program for them by switch off and on within 8 seconds.
• Alternatively, we recommend using our optional controller (with in-built safety transformer)
which comes with (a) remote control for easy operation and (b) auxiliary connection of 24V for
operation of any other electrical item.
Safety Warnings
The persons who are in charge of installationshould have the required qualifications for this type
of work.
• Avoid making contact with the electric voltage.
• Comply with the current standards regarding accident prevention.
• IEC 364-7-702 standards must be observed: WIRING IN BUILDINGS, SPECIAL WIRING,
SWIMMING POOLS.
• Replacement must be performed with the lamp disconnected from the electric power system.
• Do not handle any electrical components with wet feet.
Warranty
The manufacturer warrants this LED underwater light bulb against defects in materials and
workmanship for a period of one year from the date of purchase. This warranty does not cover
the fixture becoming damaged due to misuse, accidental damaged, improper handling and/or
installation and specifically excludes liability for direct, incidental or consequential damages,
water coming into the housing.
Defects in materials and workmanship are exclusive of the following:
•The light with less than 500 normal LED has 3 dead LED or less.
•The light with more than 500 normal LED has 6 dead LED or less.