
Consult your veterinarian for recommended wear time.
WEAR & USAGE
•Break in period consists of wearing a half hour on/off the first day,
increasing daily as tolerance improves.
•Please consult your veterinarian for recommended wear time.
•DO NOT leave your pet unattended while wearing this support,
when metal stays are inserted.
•DO NOT over-tighten Velcro®straps. This can cause irritation and
limit mobility.
•Machine wash cold, gentle cycle, and lay flat to dry.
•All supports are compatible for use with our EMpower Device.
FITTING INSTRUCTIONS
1. Unhook all Velcro®straps to open
the support
2. Place the support underneath
the dog, bringing front side up
against the armpits, and secure
the chest strap (A).
3. Wrap the three top Velcro®straps
over the back and secure, starting
from the shoulders and moving to
the tail (B-D).
4. Wrap the back leg straps behind
and around the legs and through
the plastic loop to secure (E).
These should be very snug for
carrying purposes, as they
support the dog’s rear end.
5. Ensure the support is snug enough
to not slip into misalignment or
allow any slipping while carrying.
6. Check regularly for areas of
irritation. If there are areas of
irritation, adjust the support for a
better fit.
CARE
• Hand wash only, lay flat to dry.
• If signs of wear and tear appear
on the support during the
warranty period, discontinue use
and contact us at:
Back Strap
Lift Handle
Chest Strap
Leg Straps
A
EE
BCDB C D