Anker PowerExtend 12 Strip User manual

Overview
Using Your PowerExtend Strip
PowerExtend 12 Strip
Safety
[phone] Mon - Fri 9:00am - 5:00pm (PT)
[e-mail]
Product Number A9191
PowerExtend 12 Strip
51005002344 V02
●When the switch is turned on, the two Surge Protection Lights, and
Grounded Protection Light will turn blue. The Power Light will turn
white.
●Tip 1: The surge protection feature can protect your computers,
smartphones and other electronic equipment against voltage
fluctuations, surges, and spikes. If the two Surge Protection Lights
are o, it indicates the surge protection is not functioning normally.
●Tip 2: In the event of a power overload, the On / O Switch will cut
o the power automatically.
●Do not connect PowerExtend to an ungrounded outlet.
●Do not use with extension cords.
●Do not exceed electrical ratings.
●Use in dry locations and indoors only.
●Install PowerExtend away from heat-emitting appliances such as
radiators.
●Keep children away from PowerExtend.
Specifications
Customer Service
18-Month Limited Warranty
ES: Garantía limitada de 18 meses
ES: Servicio de atención al cliente
Lifetime Technical Support
ES: Soporte técnico ilimitado
Anker Innovations Limited
Room 1318-19, Hollywood Plaza, 610 Nathan
Road, Mongkok, Kowloon, Hong Kong
AC Input 125V AC 60Hz 15A
AC Output 125V AC 60Hz 15A 1875W
Surge Energy 4000J
Size 293 x 113 x 30 mm / 11.5 x 4.5 x 1.2 in
Cable Length 1.8 m / 6 ft
On / O Switch / Reset Button
Grounded Protection Light
C
B
Power Light
A
D
Surge Protection Light
AC Outlet
E
Grounded Protection Light
C
Power Light
A
D
Surge Protection Light
AC Outlet
E
Power On
B
RESET
Power O
A
RESET

Descripción general
Uso de la
PowerExtend Strip
FCC Statement
This device complies with Part 15 of the FCC Rules. Operation is
subject to the following two conditions: (1) This device may not
cause harmful interference, and (2) this device must accept any
interference received, including interference that may cause
undesired operation.
Warning: Changes or modifications not expressly approved by
the party responsible for compliance could void the user's
authority to operate the equipment.
Note: This equipment has been tested and found to comply with
the limits for a Class B digital device, pursuant to Part 15 of the
FCC Rules. These limits are designed to provide reasonable
protection against harmful interference in a residential
installation.
This equipment generates, uses, and can radiate radio frequency
energy and, if not installed and used in accordance with the
instructions, may cause harmful interference to radio communi-
cations. However, there is no guarantee that interference will not
occur in a particular installation. If this equipment does cause
harmful interference to radio or television reception, which can
be determined by turning the equipment o and on, the user is
encouraged to try to correct the interference by one or more of
the following measures:
(1) Reorient or relocate the receiving antenna.
(2) Increase the separation between the equipment and receiver.
(3) Connect the equipment into an outlet on a circuit dierent
from that to which the receiver is connected.
(4) Consult the dealer or an experienced radio / TV technician
for help.
The following importer is the responsible party.
Company Name: Fantasia Trading LLC
Address: 9155 Archibald Avenue, Suite 202, Rancho Cucamon-
ga, CA, 91730, US
Telephone: [phone]
IC Statement
This device complies with Industry Canada license-ICES-003.
Operation is subject to the following two conditions: (1) This
device may not cause interference, and (2) This device must
accept any interference, including interference that may cause
undesired operation of the device.
Le présent appareil est conforme aux CNR d'Industrie Canada
applicables aux appareils radio exempts de licence. L'exploita-
tion est autorisée aux deux conditions suivantes : (1) l'appareil
ne doit pas produire de brouillage, et (2) l'utilisateur de l'appareil
doit accepter tout brouillage radioélectrique subi, même si le
brouillage est susceptible d'en compromettre le fonctionnement.
Seguridad
● Cuando el interruptor está encendido, las dos luces de
protección contra sobretensiones, y la luz de protección de
conexión a tierra se encienden en color azul.La luz de
encendido se volverá blanca.
● Consejo 1: Si la luz de protección contra sobretensiones está
apagada, indica que no está funcionando con normalidad.
● Consejo 2: En el caso de una sobrecarga, el interruptor de
encendido/apagado cortará la alimentación de forma
automática.
● No conecte la PowerExtend a una toma de corriente sin
conexión a tierra.
● No la utilice con cables de extensión.
● No exceda las clasificaciones eléctricas.
● Úsela únicamente en lugares secos y en interiores.
● Instale la PowerExtend lejos de aparatos que emitan calor,
como radiadores.
● Mantenga a los niños alejados de la PowerExtend.
Especificaciones
Entrada CA 125V AC 60Hz 15A
Salida CA 125V AC 60Hz 15A 1875W
Energía de
sobretensión
4000J
Tamaño 293 x 113 x 30 mm / 11.5 x 4.5 x 1.2 in
Longitud del
cable
1.8 m / 6 ft
Interruptor de encendido/apagado / Botón de restablecimiento
C
B
Luz de encendido
A
D
E
Luz de protección de conexión a tierra
C
A
D
Luz de protección contra sobretensiones
Toma de CA
E
Power On
B
RESET
Power O
A
RESET