anko 42827A0 User manual

Multi Function Digital Blender
42827A0
User Manual
PLEASE READ AND SAVE THESE
INSTRUCTIONS FOR FUTURE REFERENCE

IMPORTANT SAFEGUARDS
When using electrical appliances, basic safety precautions should always be followed to reduce the risk
of fire. Electric shook and injury to persons, including the following:
This appliance is for household use only, not designed for commercial use.
Sharp cutting blades. Be careful when handing, emptying the bowl and during cleaning.
This appliance is not intended for use by persons (including children) with reduced physical,
sensory or mental capabilities, or lack of experience and knowledge, unless they have been
given supervision or instructions concerning use of the appliance by a person responsible for
their safety.
Children should be supervised to ensure that they do not play with the appliance.
Misuse may cause injury.
If the supply cord is damaged, DO NOT use. For electrical safety, any repairs to the product
should only be carried out by a qualified electrical person only or the product must be disposed.
CAUTION: Be careful if hot liquid is poured into the blender as it can be ejected out of the
appliance due to a sudden steaming.
Ensure that the blender is switched OFF before removing it from the base (motor unit).
CAUTION: In order to avoid a hazard due to inadvertent resetting of the thermal cut-out, this
appliance must not be supplied through an external switching device, such as a timer, or
connected to a circuit that is regularly switched ON and OFF by the utility.
Please read these instructions carefully for safety and to get the best results from your
appliance.
To protect against risk of electrical shock, do not put cord, plug or unit in water or other liquid.
Unplug from mains power outlet when not in use and before cleaning. Allow to cool before
putting on or taking off parts.
The use of attachments not recommended by the manufacturer may cause a risk of injury to
persons.
Do not let cord hang over edge of table or counter or touch hot surfaces.
Do not place the appliance on or near a hot gas or electric burner or in a heated over.
Avoid contacting moving part.
Keep hands and utensils out of container while blending to reduce the risk of severe injury to
persons or damage to the blender. A scraper may be used but must be used only when the
blender is not running.
IMPORTANT! Always operate blender with lid cover in place.
IMPORTANT! Do not process any hot liquids or ingredients in the large or small cup.
Switch off the appliance and disconnect from mains power before changing accessories or
approaching parts that move in use.
Note: The appliance incorporated with a non-self resetting thermal motor protection circuit to
protect the motor from overheating. If the motor shuts OFF while in use; unplug the unit from main
power outlet. Remove the blender / soup jug / cup from motor unit and free the blade of any
obstructions. Allow the unit to cool down for 30 to 40 minutes. After then, plug the unit back into to
mains power for normal operation.

WARNING!
1. After using the soup function, after one cycle, allow the electric motor unit to cool
down approx. 20 minutes before using it again.
2. Except for the soup function (approx. 8 minutes), the maximum operating time for
other functions are 1 minute. After one cycle, allow the electric motor unit to cool
down for at least 1 minute before using it again.
After 5 continuous cycles of operation, allow the electric motor unit to cool down to room
temperature for approx. 30 minutes before using it again.
SAVE THESE INSTRUCTIONS
FOR HOUSEHOLD USE ONLY

KNOW YOUR MULTI FUNCTION DIGITAL BLENDER
Part A:
1 Measuring cup (1x)
2 Jug Lid (1x)
3 Blender jug / Soup jug, 1200ml (1x)
4 Blade attachment (1x)
5 Electric motor unit (1x)
6 Control panel
7 Operating light
8 Suction feet
9 Seal Lid (2x)
10 Large cup, 1000ml (1x); with ice tube (11) inserted 900ml
11 Ice tube (1x)
12 Small cup, 500ml (1 x)
13 Cup lid (1x)
Not shown: • mains cable with main plug

Part B:
CONTROL P ANEL
A– Display
B–Function- Program selection by pressing repeatedly
C– Star t/Stop Switch the device on / off and star t /
stop the program
CAUTION: Danger of suffocation! Keep children and animals away from the pack aging
material.
1. Unpack all parts and check the items supplied for completeness (see Part A above)
and possible transport damage. If you find any damage to the product or component,
DO NOT use. Contact Kmart for a replacement.
2. Remove any protective films and stickers that may be present on the appliance.
3. Clean all accessories before you first use to remove any residue from manufacture.
Follow instructions in the " Cleaning”and “Storage" section in the manual.
Blade Attachments
• Danger of injury due to sharp blades! Never grip the blade attachment (4) by the
blades. Hold the plastic housing when inserting or removing the blade attachment.
• The plastic housing of the blade attachment (4) contains sealing rings. This ensures
that the blender/soup ju g, smal l and large cup does not leak. Make sure before
each use that the sealing ring is correctly inserted in the groove on the plastic blade
housing to prevent any leaks.
IMPORTANT! Danger of damage to the blade attachment! Do not drop the blade
attachment (4) and do not leave it lying in water or other liquids for longer than two
hours to avoid damage.
• The blade attachment (4) can be used for chopping, stirring and blending ingredients.
Attaching

1. Make sure that the sealing ring is correctly inserted in the groove on the plastic blade
housing.
2. Screw the blade attachment (4) onto the blender/soup jug (3) or the cups (10, 12).
Check that it fitted correctly.
IMPORTANT! DO NOT operate the blender without any food in the blender/soup jug or
small or large cup.
3. Place the blade attachment (4) together with the blender /soup jug / cups (3, 10, 12) onto
themotor unit (5). When you do this, make sure that the arrows marked on the blade
attachment (4) and the electric mo tor unit (5) are above one another. Then twist clockwise
to secure.
Removing
Follow the steps for attaching in reverse order:
1. Twist the blade attachment (4) together with the blender/soup jug/cups (3, 10, 12)
counterclockwise and remove from the mo tor unit (5).
2. Remove the blade attachment (4) carefully.
3. Turn the large cup (10) or small cup (12) upside down and unscrew the blade
attachment (4).
4. Empty the blender/soup jug (3) first and only then unscrew the blade attachment (4).
Blender/Soup Jug
In the blender/soup jug (3) the items to be blended are processed.
Its maximum fill volume is 1200ml. Never exceed the maximum fill volume. Read the “Use”
chapter, “Preparing Hot Food” section for details.
CAUTION: To avoid scalding, take extreme care when blending and removing hot food
from the blender.
Cups
CAUTION: Danger of burns! Never fill the small or large cup (10, 12) with hot food or
liquids!
The contents must not be hotter than 50°C. DO NOT use the small or large cup for making
hot soup.
The items to be blended or processed can be stored in the large and small cups. The large
cup (10) is suitable for portions up to 1000ml (up to 900 ml with the ice tube (11) inserted),
the small cup (12) for portions up to 500ml.
Refer to “Processing Cold Ingredients” section for details.
Ice tube
The ice tube must not be cleaned in the dishwasher.
The ice tube (11) is suitable for cooling smoothies, shakes or similar liquids while they
are being prepared. It can only be used with the large cup (10).

1. Unscrew the lid (13) of the large cup (10).
2. Fill the ice tube (11) with ice cubes and insert it into the large cup (10).
3. Screw the lid (13) back onto the large cup (10).
Seal Lid
The seal lid is not suitable for the transport of liquids, it is not leak proof. The seal lid (9) can
be screwed onto either the small cup (12) or the large cup (10).
When you press the Function (B) button, one of 8 programs can be selected in the
following order:
PROGRAM
APPLICA TION
DURATION / OPERATION
CUP / JUG USED
High
Fine chopping or even mixing of
ingredients
60 seconds; high rotation
speed
Blender/Soup
jug / Large cup
Low
Rough chopping up or stirring of,
for example, mousses, dips,
mayonnaise
60 seconds; low rotation
speed
Blender/Soup
jug /
Large cup
Chop
Chopping of, for example, fruit,
vegetables, cheese, cereals
11 seconds; pulse function
with varying speeds
Large cup /
Small cup
Grind
Grinding of hard, dry food stuffs
(e.g. coffee beans, nuts, peanuts)
30 seconds; grinding peanut
Small cup
Soup
Pureeing with Soup function for
making soups or sauces, for
example
8 minutes; variable rotation
speeds; soup function; This
program only works with
the soup mixing container!
Blender/Soup
jug
Ice crush
Crushing ice cubes
40 seconds; pulse function
Blender/Soup
jug only.
Puree
Pureeing foodstuffs to make
porridge, hummus, pates, for
example
60 seconds; 55 seconds fast,
then slower
Large cup
Smoothie
Mixing smoothies and shakes
60seconds; varying speeds
Large cup
• Never insert the blade attachments into the motor unit without attaching to the cup or
blender/soup jug .
• Danger of damage due to insufficient cooling! Never place the motor unit on a soft
surface. Always use it on a flat hard surface. The ventilation openings on the side and
bot tom of the motor unit must not be covered.

• Do not overfill! Make sure that the maximum fill level (MAX marking in the cup / blender/soup
jug) is not exceeded.
• Danger of damage from incorrect use of the accessories! The device should only be
used if it has been completely and correctly assem bled!
• Danger of damage or injury from unforeseen events! Do not leave the device
unattended when it is in use.
• Make sure that the device remains stable during operation. Always hold the motor
unit firmly with one hand.
• The device must not be moved while it is switched ON.
• The device has an automatic switch-off function. If no settings are made within
the space of 3 minutes in stand-by mode, the device switches off automatically. To
carry on working, switch the device back on by pressing the Start / Stop button (C).
• The display (A) and the operating light (7) are only switched on if the cup or blender/
soup jug has been fitted on the motor unit correctly .
• A program can be changed at any time during operation by pressing the Function button (B)
or be stopped by pressing the Start / Stop button (C).
Processing Cold Ingredients
CAUTION: Danger of burns! Never fill the small or large cup with hot food or liquids!
The contents must not be hotter than 50°C.
When processing frozen fruit or vegetables, always pour a little liquid into the cup as
well.
For all programs:
1. Place the motor unit (5) on a flat and stable surface:
oThe surface must be dry.
o The suction feet on the bottom of the appliance must stick to it firmly.
oMake sure that there is a sufficient gap from the edge of the work surface
so that the device does not fall off during operation.
2. Select the small or large cup (10, 12). If required, attach the ice tube (11) (see “Ice Tube”
section) to the larger cup (10) and make sure that the lid (13) is screwed securely.
3. Pour the ingredients you want into the cup (do not exceed the MAX marking in the cup).
4. Screw the blade attachment for cup (4) clockwise onto the cup .
5. Turn the cup upside down, place the blade attachment housing into the electric
motor unit (5) and twist clockwise to secure it in place. Pay attention to the
arrow markings for proper secure fitment.
6. Insert the supply cord plug into a mains power outlet socket that is easily accessible.
7. Switch ON the device: Press the Start / Stop button (C) once. The op erating light (7)
will flash and the display (A) will switch ON.

8. You can select the program you want by repeatedly pressing the Function button (B).
On the display (A) an arrow points to the chosen program and the duration of the
respective program is shown.
9. To start the program: Hold the motor unit (5) securely with one hand and press the Start
/ Stop button (C) once.
10. When the program is finished, switch OFF the device. Press the Start/ Stop button (C)
once to do this. The operating light (7) and the dis play (A) will go out.
11. Remove the supply cord plug from mains power outlet socket.
12. Wait until the blades have come to a complete stop, then twist the blade attachment
with the cup counterclockwise and remove from the electric motor.
13. Turn over the cup and unscrew the blade attachment from the cup in the
counterclockwise direction.
14. Remove the blended items or store them in the small or large cup (10, 12) and seal
with the seal lid (9).
15. Clean the accessories immediately after each to prevent food contamination
(refer to "Cleaning” and “Storage" sections). Do not allow food residue to dry on the
product after use.
Preparing Hot Food
CAUTION :
oDanger of injury! Never reach into the blender/soup jug when it is fitted on the
motor unit.
o Never operate the soup jug without the lid.
oOverheating of the device! Never use SOUP function with an empty blender/ soup
jug .
oDanger of burns! The surface of the soup jug can become hot when using the
SOUP function. Never touch it by hand, use suitable kitchen gloves when handling.
oAlways empty the soup jug after use. It is not suitable for storing food.
IMPORTANT! The soup function is for heating only and does not cook raw food. Food must be
pre-cooked prior to using it in the soup jug.
With the SOUP program, the contents in the blender/soup jug (3) are pureed for 8 minutes.
The temperature that is reached after these 8 minutes depends on the starting temperature of
the ingredients. The recommendations are:
• do not use any frozen food, precook such as potatoes and other hard ingredients.
• use warm water and heat ingredients before blending .
• do not abort the Soup program prematurely. It is possible that the desired
temperature will then not yet have been reached.

1. Place the motor unit (5) on a flat and stable surface:
oThe surface must be dry.
o The suction feet on the bottom of the appliance must stick to it firmly.
oMake sure that there is a sufficient gap from the edge of the work surface
so that the device does not fall off during operation.
oEnsure there is clear space above (towards wall-mounted cupboards and
shelves) and to the sides in order to prevent any pos sible damage from hot
steam.
2. Screw the blade attachment firmly on to the bottom of the blender/soup jug:
• Place the soup jug (3) with the blade attachment (4) onto the electric motor
unit (5) and twist it clockwise to secure it in place. Pay attention to the arrow
markings
for proper secure fitment.
• Remove the lid (2) and pour in the ingredients you into the blender/soup jug
(do
not exceed the MAX marking in the jug).
• Ensure to fit the lid (2) .
• Insert the supply cord plug into a mains power outlet socket that is easily accessible.
• Switch ON the device: Press the Start / Stop button (C) once. The op erating light (7)
will flash and the display (A) will switch ON.
3. Select the Soup program. To do this, press the Function button (B) until the arrow on the
display (A) points to “SOUP”.
4. Start the program: Hold the motor unit (5) securely with one hand and press the Start /
Stop button (C) once.
5. If additional food is to be added during processing, twist the measuring cup (1) on the lid
(2) and then remove it upwards. Add ingredients through the opening in the lid.
6. When the program is finished, switch OFF the device by pressing the Start / Stop button (C)
Once. The operating light (7) and the display (A) will go out.
7. Remove the supply cord plug from mains power outlet socket.
8. Wait until the blades have come to a complete stop, then twist the blade attachment
Housing (4) with the soup jug (3) counter- clockwise and remove it from the electric motor
unit (5).
9. Transfer the food from the soup jug (3) into a suitable vessel.
CAUTION: Food will be hot. Handle with care.
10. Unscrew the blade attachment (4) from the soup jug (3) by turning it counterclockwise and
rinse both parts (refer to “Cleaning” and “Storage” section). Do not allow food residue
to dry on the product after use.
• Danger of electric shock! Remove the power supply cord plug from mains power
outlet
socket before cleaning the device.
• Danger of electric shock! Keep the electric motor unit, the main cable and the main
plug away from water or other liquids! Never touch them with wet hands when the
blender is connected to the main power .
• The blade attachment and the ice tube must not be cleaned in the dishwasher.
• Danger of injury due to sharp blades! Take care when handling the blade attachments.

The blades are very sharp. Never touch with bare hands. Always hold the blade
attachment firmly by the plastic housing.
• Surfaces could be damaged! Do not use any caustic or abrasive cleaning agents
or scouring sponges to clean the device.
1. Make sure that the device is disconnected from the mains
power.
2. If required, wipe down the motor unit (5) with a slightly damp cloth. Then dry it
with a soft cloth.
3. Rinse the accessories which have been used with clear, warm water and some mild
detergent.
The cups / soup jug (10, 12, 3) along with the lids can be cleaned in the dishwasher.
4. Allow all parts to dry completely .
5. Reassemble the device.
6. Store the device in a cool, dry place which is protected from direct sunlight and is
out of the reach of children and animals.
NOTE: The plastic parts may suffer discoloration over time. However, this does not have
any negative effect on either your health or the performance of the appliance.
If the device does not work properly, first check whether you are able to rectify the
problem yourself.
Do not attempt to repair a defective electrical device yourself! If the device will
not switch ON, check the following:
• Is the mains plug inserted in the plug socket correctly?
• Is the plug socket defective? Try another plug socket.
• Has the fuse of your main connection been activated?
• Is the blade attachment (4) screwed on correctly?
• Is the blade attachment (4) positioned in the motor unit (5) correct ly? The device
can only be switched on if the blade attachment (4) has been positioned and
locked in place correctly in the electric motor unit (5). The arrows marked on the
blade attachment (4) and the motor unit (5) must align to one another.
CLEANING
CAUTION: The stainless steel blades are very sharp.
Handle these components with caution. Ensure you keep your fingers clear of the cutting edges when
handling these items. Take care when washing the blades. Never leave them in a sink or washing bowl
with other items. Always wash separately
1. Remove the supply cord plug from mains power outlet socket before cleaning.
2. Clean all parts, including the blender/soup jug and lid, in hot soapy water and soft cloth. Do not use
abrasive products or wash it in a dishwasher.
3. Clean the electric motor unit with a damp cloth and never put it into water, other liquids or flush it
with water.

STORAGE
1. Unplug and clean unit.
2. Store in original box or in a clean, dry place.
3. Never store the blender while it is hot or while connected to mains power.
4. Never wrap the cord tightly around the appliance. Never place any stress on the power cord,
especially where the cord enters the unit, as this could cause the cord to fray and break.
TECHNICAL SPECIFICATION
Voltage: 220-240Va.c. 50-60Hz
Power: 1200W
12 MONTH WARRANTY
Thank you for your purchase from Kmart.
Kmart Australia Ltd warrants your new product to be free from defects in materials and workmanship
for the period stated above, from the date of purchase, provided that the product is used in accordance
with accompanying recommendations or instructions where provided. This warranty is in addition to
your rights under the Australian Consumer Law.
Kmart will provide you with your choice of a refund, repair or exchange (where possible) for this
product if it becomes defective within the warranty period. Kmart will bear the reasonable expense of
claiming the warranty. This warranty will no longer apply where the defect is a result of alteration,
accident, misuse, abuse or neglect.
Please retain your receipt as proof of purchase and contact our Customer Service Centre on 1800 124
125(Australia) or 0800 945 995 (New Zealand) or alternatively, via Customer Help at Kmart.com.au for
any difficulties with your product. Warranty claims and claims for expense incurred in returning this
product can be addressed to our Customer Service Centre at 690 Springvale Rd, Mulgrave Vic 3170.
Our goods come with guarantees that cannot be excluded under the Australian Consumer Law. You are
entitled to a replacement or refund for a major failure and compensation for any other reasonably
foreseeable loss or damage. You are also entitled to have the goods repaired or replaced if the goods
fail to be of acceptable quality and the failure does not amount to a major failure.
For New Zealand customers, this warranty is in addition to statutory rights observed under New
Zealand legislation.