anko ATTACHABLE HIGHCHAIR User manual

ATTACHABLE HIGHCHAIR
INSTRUCTION MANUAL
  
15
kg
6
MAXIMUM
WEIGHT
OF CHILD

2
2
A
D
C
B
C
Part List:
Assembly:
F
1
H
B
E
G
H
Clamp
Back Tube
Shrapnel
Main Buckle
Seat cover
Seat Pad
Shoulder strap with hook
Insert back tube (B) into the sleeve of seat cover (H).
Press Shrapnel (C) and simultaneously put the clamp assembly
into the Back Tube (B) until there is a "Click" sound. Make sure
the side slot of the clamp tube is faced outwards during assembly.
Repeat for both sides.
Adjustor
Support Zipper I

3
6
Attached to Table:
54
D
E
3
A
D
Mount the chair to the table.
Check the chair to ensure it is
attached to the table tightly
as per image.
Screw Adjustor (D) upwards to secure to the table surface tightly,
then zip up the part (E). Repeat for both sides.

NO!NO!NO! NO!NO!NO!NO!
D D D D D
A A A A A
> 3,5 cm
> 3,5 cm
4
7
F
Harness system:
8 9
G
WARNING:
This product is not suitable for use with all tables. Do not use with glass-topped tables, tables with loose
table tops, table leaves, single pedestal tables, card tables, camping tables or any other table that does
not oer suciently stable support.
MAXIMUM THICKNESS OF THE TABLE: 90 mm.
MINIMUM THICKNESS OF THE TABLE: 20 mm.
Do not use if the table is not suitable as per above images.
WARNING! The child should be harnessed securely and supervised at all times.
Insert the side clips into the main buckle (F).
You will hear a "Click" sound when the buckle is in position.
Attach the shoulder belt
hooks to the main buckle.
Adjust the length of the harness
to fit your child.

1
F
5
4
A
A
2
E
3
D
Remove from table and fold:
Unzip the support (E).
Unfasten the safety buckle and remove your child from the highchair.
Turn the clamp assembly inwards to fold the chair flat.
Unscrew the Adjustor (D) to
loosen the clamp.