anko NURSERY ROCKING CHAIR User manual

Option 1: Rocking Chair Step 1:
Affix parts E&H with parts A, B &C.
A 4X
B 4X
F 2X
C 4X
D 1XH 2X
G 2X
E X1
NURSERY ROCKING CHAIR
Read all instructions carefully BEFORE assembly and USE of this product.
PLEASE KEEP INSTRUCTIONS FOR FUTURE REFERENCE.
M8X 50mm/2in
M8X18 mm/0.7in

Option 2: Occasional Chair Step
1: Affix parts E , F & G.
Step 2: Your chair is ready for use.
CARE INSTRUCTIONS:
WIPE CLEAN WITH A SOFT DAMP OR DRY CLOTH. SPOT CLEAN ONLY IF NEEDED.
DO NOT USE ABRASIVE MATERIALS AND SOLVENTS. CHECK AND TIGHTEN ALL PARTS
REGULARLY. KEEP AWAY FROM WATER AND DIRECT SUNLIGHT. STORE IN A DRY PLACE.
FOR INDOOR AND DOMESTIC USE ONLY.
WARNING:
DO NOT STAND ON THIS CHAIR. DO NOT USE THIS CHAIR AS A STEP LADDER. SUITABLE FOR
ONE PERSON USE ONLY. DO NOT USE UNTIL ALL SCREWS ARE FIRMLY SECURED. USE ONLY
ON A FLAT SURFACE. FAILURE TO FOLLOW THESE WARNINGS COULD RESULT IN SERIOUS
INJURY.
MAXIMUM SAFE LOAD WEIGHT: 100KGS / 220.5lb.
Drawings in the manual are for visual purposes only. Actual product may vary slightly.
The manufacturer reserves the right to change any specification or feature without prior notice.
Adult assembly required.
Note: please pay attention to the final orientation of parts G and F.
42915911
MADE IN CHINA
FOR AU/NZ: IMPORTED FOR KMART STORE IN
AUSTRALIA AND NEW ZEALAND.
FOR USA: IMPORTED BY ANKO RETAIL INC 19500
ALDERWOOD MALL PARKWAY LYNNWOOD WA
98036 USA.