anko 42750512 User manual

Floor Standing Tablet
and Smartphone Stand
Instruction Manual
P190042_Intra_SelfieStick_20190404.indd 1 4/4/2019 10:46 AM
Keycode：42750512
Safety Instructions:
Please read the instruction manual before using this device and follow
all the safety instructions to avoid damage caused by improper use.
Keep the instruction manual for future reference. Should this device
be given to a third party, then this instruction manual must also be
handed over.

Do not immerse the device in water or in other liquids.
Do not use the device in wet conditions.
Do not use the tripod in windy conditions or on an uneven surface.
Do not use the device if it is damaged.
This device is not a toy. Children should be supervised to ensure
they do not play with the device.
1. Unpack the device and check if all parts are there and undamaged.
Should this not be the case, return the product to Kmart for replace-
ment.
2. Danger of suffocation! Keep all packaging materials away from
children.
3. Remove all protective foils and packaging material prior to use.

P190042_Intra_SelfieStick_20190404.indd 2 4/4/2019 10:46 AM
Unscrew to nut to unfold the
tripod to place it on a flat
surface, tighten the screw again.
01
Install the telescopic rod to the
desired length, tighten the
screw.
02
Same as step 2.
03
Same as step 2.
04
Unscrew the screw nut behind
the holder
05
Push the axis into the nut and
secure the nut.
07
Assembly completed. Mount the
device on the floor stand, ready
to use.
Put the nut into the ball joint,
aimed the rotation ball axis into
the hole
06
Assembly and Use:
Parts:
08
The additional smartphone
mount assembly method is
same as tablet mount.
09
1
23
3
2
3
2
1
3