Anritsu MP1764C-02 User manual

Document No.: M-W2374AE-2.0
ANRITSU CORPORATION
MP1764C-02,03
Error Detector
Operation Manual
(GPIB Programming)
Second Edition
•Read this manual before using the equipment.
•To ensure that the equipment is used safely, read
the "For Safety" in the MP1764D Error Detecto
r
Operation Manual first.
•Keep this manual with the equipment.

ii
MP1764C-02,03
Error Detector
Operation Manual (GPIB Programming)
1 March 2004 (First Edition)
2 July 2004 (Second Edition)
Copyright © 2004, ANRITSU CORPORATION.
All rights reserved. No part of this manual may be reproduced without the prior written permission of the
publisher.
The contents of this manual may be changed without prior notice.
Printed in Japan

1
Manual Change
The functions and performance of the MP1764C-02, 03 are common to
those of the MP1764D. Read the “MP1764D Error Detector Operation
Manual (GPIB Programming)” (M-W2342AE) replacing the part shown in
the table below when using the MP1764C-02, 03.
Difference from MP1764D Error Detector
Operation Manual (GPIB Programming)
Section Page Difference
--- All Read MP1764D as MP1764C.
NWhen both Options 02 and 03 are installed:
The device messages to be used for the MP1764C-02, 03 are the same
as those for the MP1764D.
NWhen either Option 02 or Option 03 is installed:
See the following tables for the valid device messages for Option 02 and
Option 03:
Valid Device Messages for Option 02
Function
Header Part of
Control Mes-
sage
Page Related Page
Input data select DSL p. 9-151
DATANDATA tracking/
Difference adjust con-
trol select
DAC p. 9-152
Single-ended/
Differential select DSD p. 9-153
Data input termination
condition DTC p. 9-158
p. 9-8, 9-10,
9-11, A-6, C-1
Valid Device Messages for Option 03
Function
Header Part of
Control Mes-
sage
Page Related Page
Clock select RRC p. 9-154
PLL reset RPL p. 9-155
Recovery frequency RFQ p. 9-156
p. 9-8, 9-10,
9-11, A-6, C-1
* Commands other than the above are valid for the both options.
* The commands become invalid if the corresponding option is not in-
stalled.

2.