Pls note:if the device shows this interface,pls left the
password blank,only click’ok’ to continue.
1.Step One:Startup Wizard
The sysytem will automatically open ther ‘Boot Wizard’ nd ‘Tips’,to guide the User toset up basic settings.
You click ‘ok’and ‘next’to continue.Pls note:If you have installed a hard drive into the device,iy won’t show
‘Tips’.
If the system didn’t show as the picture 1,pls clck the right button of the mouse and click ‘Boot Wizard’,then
shows the Boot Wizard as cture 2shown.
2.Step Two:After the step one ,it as shown in the picture3:Scan the QR code to begin downloading the app directly
. It can be download by the phone which is Iphone or Android system.
By the way:another method to download the app,you can open your app store or Google play by Click your phone
to search ‘AT Cloud’ and download the app.
Click ‘ok’ when finished,
3.Step three:After the step two,open your ‘AT Cloud’ app:(1) you can click ‘Register new user’ to apply and
account to login,shows as bellowing:Set up your Email Address,Verification Code,password and confirm password
again,click ‘Register’ when finished setting. Show as picture 4 and picture 5. when you finished register account,
it shows as picture 4 and you need enter your Email Address and password and click ‘Login’ button to complete
login.
I:STEPS FOR CLOUD ACCESS FROM MOBILE DEVICE
1
3
45
2
