Antik Juice Nano User manual

IPTV STB QUICK GUIDE
Detailed user manual download from
www.my-home-television.com

- 2 -
Dolby Digital:
Manufactured under license from Dolby Laboratories.
Dolby and the double-D symbol are trademarks of Dolby Laboratories.
HDMI:
Transferring uncompressed video data and compressed or uncompressed dig-
ital audio data from a HDMI-compliant source device.
MPEG2:
Audio and video compression and transmission.
Note:
Set-top Box ´s rmware is subject of ongoing software development therefore
not all the functionalities described in the manual respont to the current status.

- 3 -
IMPORTANT SAFETY INSTRUCTIONS AND WARNINGS
WARNING! To reduce the risk of re or electric shock, do not expose the device to rain or moisture.
• Donotremovedevicecoversasthismayresultinpersonalinjuryormechanicaldamage.Therearenouser
serviceablepartsinside
• Positionthecablessothattheycannotbewalkedonorpinchedbyitemsplacedonoragainstthem
• Useonlypowercablesprovidedinthebox.
• Makesurethatthevoltageofyourelectricitysupplyisthesameasthatindicatedontherearofyourset-topbox
• Donotplaceitonsoftorslipperysurface.
• Donotplaceanyobjectsontopoftheset-topboxornearit.
• Donotblockanyventilationopenings.
• Putthedeviceinaproperlyventilatedarea,awayfromdirectsunlightoranysourceofheat.
• Donotinstallitnearanyelectricaldevice.
• Donotexposethedevicetoinuenceofmagneticeld
• Protectitfromchemicals,dustandhumidenvironment.
• Unplugthisset-topboxduringlightningstorms
• Cleanonlywithdryclothwhileset-topboxispoweredoff
• Donotuseanydetergenttocleanit.
• Keepitawayfromtheroomswithhighhumidity.
• Useonlycertiedremotecontrolbatteries.
• Underanycircumstancesdonotdisposeofthisproductwithyournormalhouseholdwaste.
• Referallservicingtoqualiedservicepersonnelonlyatyourprovider
• Yourproviderwillnotacceptliabilityforanydamagecausedbynotfollowingthesesafetyinstructionsand
warnings
- Read these instructions carefully!
- Follow these instructions!
- Mind all the warnings!

- 4 -
CONTENT
IMPORTANTSAFETYINSTRUCTIONSANDWARNINGS
CONTENT
CONNECTINGOFSET-TOPBOXTOYOURLOCALNETWORK
CONNECTINGOFSET-TOPBOXTOYOURWi-FiNETWORK
CONNECTINGOFSET-TOPBOXTOATELEVISION
CONNECTINGOFSET-TOPBOXTOATELEVISIONUSINGANALOGUEAVCABLE
CONTROLINGOFSET-TOPBOXBYIR2
CONNECTINGOFSET-TOPBOXTOTHEMAINSUPPLY
IDENTIFICATIONOFPARTS
THEREMOTECONTROL(RC)-BUTTONSDESCRIPTIONS
THEREMOTECONTROL(RC)-BUTTONSDESCRIPTIONS
FREQUENTLYASKEDQUESTIONS(FAQ)
SETTINGS-TVOUTPUTS
OTHEROPTIONALSET-TOPBOXFEATURES.
OTHEROPTIONALSET-TOPBOXFEATURES.
TECHNICALSPECIFICATION
3
4
5
6
7
8
8
9
9
10
11
12
13
14
15
16

- 5 -
CONNECTING OF SET-TOP BOX TO YOUR LOCAL NETWORK
Connecting of Set-Top Box to local network.
RJ 45 cable
Internet
Router / HAG
RJ 45 cable

- 6 -
CONNECTING OF SET-TOP BOX TO YOUR Wi-Fi NETWORK
1. Place your Set-Top Box within the reach of wireless network
2. Connect Set-Top Box to wireless network
3. Use the following steps to set the connection in Menu:
Settings > Wi > Scan AP > Select AP > Insert password > Reboot Set-Top Box
Embeded Wi-Fi
RJ 45 cable
Internet
Router

- 7 -
CONNECTING OF SET-TOP BOX TO A TELEVISION
Connecting to a Television by a HDMI cable.
HDMI cable - TV/Set-top Box
Using this type of connection set in Menu:
1. Settings / TV Outputs / Type of connection – HDMI / HD resolution – 1080i,720p
or 576i (480i for NTSC) depending on type of TV.
2. Conrm it by pressing the Use button. Set-top box will restart.

- 8 -
CONNECTING OF SET-TOP
BOX TO A TELEVISION USING
ANALOGUE AV CABLE
Connecting to a Television by a
AV adaptor cable.
CONTROLING OF
SET-TOP BOX BY IR2
Controling a STB by a IR2 sensor,
if STB is hidden ( e.g. in furniture).
IR2 cable (1,2m) - connected to Set-top Box
IR2 sensor
- to be placed in visible area
AV cable adapter
AV cable

- 9 -
After connecting of a Set-top box to a
Television or PC screen by one of the
mentioned options, plug the set-top box
into the mains supply.
In order to put Set-top box into standby
mode use standby button on remote
control. Do not unplug the Set-top box
from the mains supply.
CONNECTING OF SET-TOP
BOX TO THE MAINS SUPPLY
12V DC 2A
IDENTIFICATION
OF PARTS
Front panel
Back panel
LED standby controler
DC 12V AV LAN HDMI USB SPDIF IR2
IR sensor

- 10 -
THE REMOTE CONTROL (RC)
1
2
3
4
5
10
19
23
6
28**
7
11 24
9
8
29**
26**
12
30
14
15*
17
20
21
16*
9
27**
22
18 25**
13