Anvil 1006457285 User manual

IMPORTANT:
Read and follow all safety rules and operatng
nstructons before usng ths product.
Instructon
Manual
WHEEL
BARROW
6CU STEEL
TRAY WOODEN HANDLE
SKU# 1006457285

IMPORTANT SAFETY INSTRUCTIONS
1. Before usng ths product, please read, understand and follow all nstructons.
2. Do not exceed the total maxmum load capacty of 330bs (150kg). The rated weght s based on a
unformly dstrbuted load.
3. Do not allow chldren to use the trolley wthout supervson.
4. Do not use ths cart to transport passengers.
5. Ths cart s not sutable for use on hghways or hgh-speed use.
6. Dstrbute the load evenly on the surface of the tray.
7. Do not place tems on the top edge of the tray.
8. If any parts are damaged, cracked or msplaced, please do not use the cart before replacng the parts.
9. Do not use the cart on the surface that wll damage the tres.
10. It s recommended to check each usage of the cart.
12. Keep ths descrpton for future reference.
1234
58
7
6
Tray
1x
1x 2x
leg brace
1x
Leg
2x
Wheel
1x
2x
9
Axle
bracket
2x
Axle
1x
11
M8X130
bolt
2x
M8X80
bolt
2x
M8X 07
bolt
4x
M8X55
bolt
2x
12131415
4x
Safety InstructionsPart lstHardware
M8X25
bolt
10
Tray Brace
2x
Handle
Nose guard
Wedge

1
13
5
6
2
8
9
7
3
4
15
11
12
Assembly
14
10
15
15

STEP2 :
Turn tray over ,place handles(2)
over bolts and lower onto Wedge.
STEP3 :
Make sure the holes n leg (3) are facng
the back of the tray and then place leg
over bolts and loosely attach to handle
wth nuts .Repeat for other leg .
Assembly
1
11
12
2
3
5
STEP1 :
Push(11-12)through bottom of tray(1)and
through(5)Wedge.Repeat for second
Wedge.

STEP7 :
Slide axle(9)through wheel (7)and then into
attached bracket .Then slide second axle bracket
(8)overother end of axle .Loosely attach second axle
bracket to handle using bolts (13)and nuts .
* Fully tighten all nuts
STEP 4 :
Place(4)acrossback of leg and loosely
attach usng bolts and nuts(15).
Repeat to attach the other end of the
leg brace to the other leg .
STEP5 :
STEP6 :
Assembly
15
15
6
14
14
7
9
9
4
13
13
8
1313
10
Use bolt and nuts(14)to attach Nose
guard(6)to front of handles
Attach axle bracket(8)to bottom of
handle using a bolt(13)pushed through
the hole closest to tray.Push second bolt
(13)through hole with tray brace(10)
then through handle.