Anytek T33 User manual

1
Respected User:
Hello! First of all, thank you very much for using our
company's series of products. It is our greatest honor to
be able to serve you. Your recognition and support is our
driving force!
Our company's series of products have perfect warranty
and excellent service quality, so they are supported and
praised by customers. Since its establishment, the
company has been adhering to the business philosophy
of "customer first, quality first"; fulfilling the service tenet
of "taking the opportunity, pioneering and innovating, and
developing products with strong competitiveness";
running through "people-oriented, reputation first"
"Corporate culture."
Please read this manual carefully before using the
driving recorder. The manual is illustrated in an illustrated
manner, with a detailed illustration of the operation of the
product. In addition, due to the different production date
and batch of the product, the description may differ from
the actual product used. Please refer to the actual

2
product.
Thank you again for your support and patronage, and
sincerely hope that you will give us your feedback during
the use process. Your axe and support is our driving
force! "Happy to go out and go home safely" is our
greatest wish. Finally, we sincerely wish you happiness:
family happiness, everything goes well!
◆Working conditions
- Do not expose to high temperatures or direct sunlight,
especially in the car. Avoid getting dust into the device.
- Avoid use in wet conditions. Please note that the
moisture in the air is easily condensed and attached to
the equipment in a closed environment。
- Avoid bumps and violent impacts。
-Keep equipment and its accessories away from
flammable, explosive, corrosive liquids or gases。
- When cleaning the device, remove it from the stand first.
Clean the screen and equipment surface with a soft,
damp cloth。
- Do not disassemble, modify or repair the device

3
yourself. This can result in equipment damage. Please
send a special authorized service center for repair。
◆Temperature humidity
The normal operating temperature of the equipment is
+0 ° - +40 °, humidity 10% - 80%.Keep the device in
a safe location
◆Transport
- In the case of sudden changes in temperature or
humidity, it may cause moisture to condense inside the
machine, which may cause the device to short-circuit.
- Protect the machine from dust or collision during
transportation。
- When transporting equipment, please use the original
packaging as much as possible。
◆Car adapter (car charger)
The car adapter can be used in your car cigarette lighter
socket (DC 12 or 24V).
◆Car dash camera basic function
1.Front 1080P rear720P（USB H.264&MJ）2KHD video
2.5.0 inch IPS high brightness digital screen, anti-glare

4
blue mirror
3.Support full-featured ADAS (driving safety assistance
function)
4.Support WDR/HDR (HD night vision wide dynamic /
high dynamic) technology
5.Built-in EIS electronic image stabilization technology
6.Built-in DDR to reduce system interference
7.Germany Conte three-dimensional frameless
precision lens process
8.6G A+Multilayer filter resolution lens
9.170 degree Big wide angle

5
Appearance and button function description
1
USBpower
supply
2
Digital Rear
Camera
3
TF Card
slot
4
Electronic logger
reservation
interface
5
Reset hole
6
Speaker

6
7
camera
8
Power button
9
Up button
10
OK Button
11
Down button
12
Menu
button
13
LCD screen
Power button / screen backlight switch button
Press 【Power button】 in the off state to turn on the
power of the unit.，The machine starts working
automatically. Press and hold 【Power button】 for 3
seconds in the power on state to automatically save the
video file and user settings and shut down.
In the video/photo/playback mode, short press【Power
button】to operate the screen backlight on and off.
Menu
1. In the camera/playback mode, press the menu button
to enter the“Setup Menu”interface, press the Up/Down
button to switch the setting item, and press the OK button
to confirm the setting. Press the mode button to cycle
through the “Setup Menu” and “System Settings”
screens.，

7
Mode Button
In the standby state, cyclically switch the
camera/playback mode.
Up button/lens channel switching
Short press to toggle menu options or files during setup
operation. During video playback, press 【UP】 to rewind
playback, press【Enter】to end rewind, short press in the
camera to switch the lens channel.
Down button / emergency lock button
Short press down to switch menu options or files during
setup operation. During video playback, press 【Down】
to fast forward, short press 【Enter】 to end rewind.
In the camera mode, press the 【Down】 to activate the
emergency lock function. The lock file icon appears at the
top of the screen to protect the current video from being
overwritten by the loop. Press the【Down】button again to
cancel and lock.
Confirmation key / video key / camera key
Press OK when setting operation, press to take a photo
during standby, short press to start/stop recording, enter

8
“Setting Menu” interface, press up/down to switch
setting item, press【Enter】 to confirm setting
Reset button
When the machine is abnormal due to improper operation,
press the reset button and then turn it on again, the
machine can resume normal use.。
Installation guide
Turn off the car engine。
Insert the TF card into the recorder card slot.
【Dote】Please use high-speed TF card (Class10 or
above), TF card supports up to 64GB, please do not
insert TF card when the machine is working, so as not to
damage the data in the card.
Secure the recorder to the original rear view mirror of the
car.
Insert the 5V/2A car charger with the included car
charger into the car cigarette lighter, and connect the
USB port of the recorder to the car charger with the
charging extension cable.
【Dote】The wiring extension cable can be laid along the

9
edge of the windshield of the car during wiring.
Install the rear camera on the rear of the vehicle and pay
attention to the direction when installing. Wiring can be
laid along the roof of the vehicle. After the installation is
complete, connect the rear camera to the rear camera
interface of the recorder.
Adjust the lens position to ensure that the lens is level
with the ground.
Start the engine and check that the machine is installed
correctly.
【Dote】When the machine is installed correctly, the
system work indicator lights up; the machine starts to
enter the recording state, and the recording indicator
flashes. Please check if the picture on the display is
normal. If the display is inverted, please contact us in
time.
Function introduction
Advanced driver assistance system（ADAS）
1.Lane offset：
When the track offset (ADAS) is turned on, it runs on the

10
road. When the vehicle speed reaches the set speed, the
recorder will judge whether the lane is offset according to
the virtual solid line of the road. If it is offset, a warning
sound will appear. to remind the driver that the driveway
has been offset to prevent the driver from a safety
accident caused by distraction or fatigue.
2.Forward collision warning：
Using image sensors to sense the road traffic
environment and obstacle position in front, real-time
display of the distance of vehicles or obstacles ahead, to
achieve safe distance measurement, and to find timely
collision of vehicles with collision risks is conducive to
reducing traffic accidents and improving road traffic
safety.
Use loop recording
When the car engine is started, the recorder
automatically starts up and turns on the recording
function, the charging indicator lights up, and the
recording indicator flashes. Turn off the car engine and
the recorder automatically saves the recorded content

11
and shuts down. The recorded image segment is saved
on the TF card. If the loop recording function is turned on,
the recorder will overwrite the image recorded earlier
when the TF card is full. The video duration can be set in
the menu by itself, and the range is 1 minute / 3 minutes /
5 minutes.
◆Set the main menu to open and exit
Clicking on any screen below the screen will bring up the
setup main menu, and will exit automatically after 10
seconds without any operation.
◆Camera function
1：Open the setup main menu and click the camera button
icon “ ” to take a photo and save it to the TF card.
◆Video function
1：Click the " " icon after opening the setup main
menu to start/stop recording.
◆Video playback
1：Click " " in the setup main menu to enter playback
mode.
2：Click“ ”“ ”“ ”“ ”The icon will pop up the

12
video files recorded by “front camera”, “rear camera”,
“front camera encryption” and “rear camera
encryption”. Select the corresponding file and click the
right small window to play back.。Click in the playback
interface“ ”Lock/unlock the current file，Click“ ”
Can delete the current file，Click“ ”“ ”Rewind/fast
forward video，Click“ ”Can pause/play video，Click
“ ”“ ”Video can be played up and down，Click“ ”
Return to the parent directory.
◆One-button lock function
In the video, click “ ” to lock/unlock the currently
recorded file. When the lock is applied, the “ ” icon is
displayed in the upper right corner of the screen. The file
will not be overwritten after it is locked.
◆Turn off recording
In the main interface or video mode, click the microphone
icon " " to turn the recording on or off.
◆Camera screen switching function
No need to click any icon in the main interface, just swipe
left/right on the screen to switch the front/back pull

13
interface.
◆Time/date setting
In the main interface, click " " to enter the function
setting interface, enter the interface and click " " " "
to find the "date / clock" option, then click "click reset"
pop-up date / clock settings menu and by clicking " "
" " and "ok "to adjust and determine the settings.
【Dote】In order to effectively record the date and time of
the forensic accident, please set the correct time before
using the machine.
Reversing
First of all, the car charger must be connected to the
recorder, and the black and red line on the cable camera
is connected to the reversing light. The car charger will
automatically start the recording state. If there is any
reverse in any state, the screen will switch to the
reversing image. The machine automatically returns to
the recording mode after the reversing is completed.
Parking monitoring
When the parking monitoring function is turned on, if the

14
car is slightly vibrated in the off state, the recorder will
automatically start recording. If it is in the off state, it will
be recorded for 30 seconds and then turned off. The
recorded image is a special image. , will not be covered
by the loop.
This machine supports the power supply of the buck line.
It uses the video-reducing line with shrinking time to
realize the real-time monitoring function of the recorder.
The buck line can be used to connect the power supply
to the fuse box of the car, which does not occupy the
cigarette lighter of the car and achieves beautiful
appearance. Concealed effect
Product specification
Front/rear
camera
Support for the first 1080P / after
720P double recording
Display
5-inch 480x854 mobile phone
screen
Lens angle
170 degree

15
Video resolution
1080P(1920x1080),
720P(1280x720),
Photo resolution
(2M)1920*1080
Storage
compression
H.264
Video format
MOV
Image Format
JPEG
stored
temperature
-20℃~65℃
Operating
temperature
0℃~40℃
Operating
humidity
15-80%RH
Memory card
capacity
Maximum support 64GB
transfer speed
USB2.0
Built-in speaker
8Ω 1W

16
Built-in
microphone
High fidelity microphone
battery
Large capacity 500MAh
Car power
supply DC
MIN USB 12V~40V output 5V
Foot 2A
Note: Specifications may be changed due to upgrades,
updates, etc., subject to the actual product.
Simple Problem Elimination
If a failure occurs, try the following methods to
troubleshoot it. If you cannot eliminate it yourself, please
contact the after-sales and repair office.
Unable to record video properly
- Replace TF card
- Change the resolution
- Insert a larger capacity card.
- Make sure the card is installed correctly (you should
hear a click during the installation).
- Remove unnecessary files from the memory card to
free up space.

17
Video is not clear
- Make sure the camera lens is clean.
- Wipe off dust and dirt from the lens before shooting.
The device works fine, but the button does not work.
- Press the reset button to initialize the machine.
In general, please use the reset button to initialize with
caution, which may result in data loss.