AOM 3A MIX User manual

ASTURO ORIGINALI MAVES Spa
Via Cascina Venina 20 B/C
20090 Assago(MI)ITALY
USE AND MAINTENANCE MANUAL
GUN MOD. 3A MIX
®
(Rev. 4-30/08/07)

SIGNATURE:...........................................
DICHIARAZIONE DI CONFORMITÀ / DECLARATION OF CONFORMITY
KONFORMITÄTERKLÄRUNG / DECLARATION DE CONFORMITÉ
DECLARACIÓN DE CONFORMIDAD
ASTUROORIGINALIMAVES Spa
Via Cascina Venina 20 B/C
ASSAGO -ITALIA
++39 0289305416 - FAX ++39 0289305497
P.IVA/VAT(registration number) 11164500156
MODELLO / MODEL: 3A MIX
N_ di MATRICOLA / SERIAL NUMBER
ANNO DI COSTRUZIONE / YEAR OF MANUFACTURE
200
ACCESSORI IN DOTAZIONE / ACCESSORIES SUPPLIED
A.O.M spa DICHIARA sotto la sua esclusiva responsabilità che la macchina a cui la presente
dichiarazione si riferisce è conforme alle prescrizioni delle seguenti direttive:
A.O.M spa DECLARES on its own responsibility that the machine to which this declaration refers
conforms with the requirements in the following directives:
DIRETTIVA89/392/CEE MODIFICATADALLADIRETTIVA91/368/CEE
DALLADIRETTIVA93/44/CEE E DALLADIRETTIVA93/68/CEE(DIRETTIVAMACCHINE)
DIRECTIVE 89/392/EECAMENDED BY DIRECTIVE 91/368/EEC
BYDIRECTIVE 93/44/EECAND BYDIRECTIVE 93/68/EEC (MACHINE DIRECTIVE)
La macchina è inoltre conforme alle seguenti norme / The machine also conforms with following
standards:
UNI EN 292/1 (november 1992) Sicurezza del macchinario, Concetti fondamentali, principi gene-
rali di progettazione.-Terminologia, metodologia di base
Machinesafety,Fundamentalconcepts,Generaldesignprinciples-Terminology,basicmethodology.
UNI EN 292/2 (november 1992) Sicurezza del macchinario - Concetti fondamentali, principi gene-
rali di progettazione - Specifiche e principi tecnici
Machine safety - Fundamental concepts. General design principles - Technical specification and
principles.
LUOGO / PLACE:
ASSAGO
COGNOME - NOME / SURNAME - NAME:
BRANCHINIRIZIERI
POSIZIONE / POSITION:
AMMINISTRATORE UNICO / SOLE DIRECTOR
DATA / DATE:
/ / /
®

DearCustomer,
We want to thank you for choosing one of ASTURO ORIGINALI MAVES
Spa products.
ASTURO ORIGINALI MAVES Spa is a leading reference point in the field of
painting systems and machinery.
The name ASTURO ORIGINALI MAVES Spa has always meant reliability
and safety and this is supported by over 70 years of experience and by our
Customer satisfaction.
All our components have been designed and manufactured to guarantee the
best performance ever.
To maintain the high quality level and lengthy reliability of our products
throughout the years, always use original spare parts.
ASTURO ORIGINALI MAVES Spa units have the CERTIFICATION in
accordance with EUROPEAN DIRECTIVE 89/392 (Machine Directive.)
We are certain to have met all safety requirements and we feel confident we
have further improved working standards.
Our units, in fact, have the identification in accordance with rulings.
Furthermore, they are delivered with the instruction manual and the certifica-
te with the Declaration of Conformity to European Directive 89/392 and to
its various amendments.
The Management

Page 4 of 14
USE AND MAINTENANCE MANUAL ®
HOW TO USE THE MANUAL
Thefollowingmanualisadocumentthataccompaniesthemachinethouroughoutitslifetime.
It is, therefore, an integral part of the machine. Carefully read the following warnings and
proceduresbeforeengaginginanyactivitywiththismachine,includinghandlingandunloading
itfrom its meanof transportation.
SYMBOLS USED
All operations which might be dangerous if not performed correctly are indicated with the
followingsymbol:
All operations which, in order to avoid risks, must be performed by trained and authorized
personnelareindicated bythe following symbol:
All personnel in charge of using the machine must be thoroughly trained; all the above
informationmustbethouroughly understood andapplied.
GENERAL CONTENTS
HOWTOUSETHEMANUAL................................................................................................................4
SYMBOLSUSED...................................................................................................................................4
INFORMATION LETTER.................................................................................................................5
1.1 PACKAGING..............................................................................................................6
2.1 IDENTIFICATION DATA................................................................................................................6
2.2 MACHINEDESCRIPTION............................................................................................................7
2.3 TECHNICALFEATURES...........................................................................................................8
2.4 STANDARDANDOPTIONALCOMPONENTS..........................................................................8
2.5 MACHINABLEPRODUCTS.....................................................................................................9
2.6 DIMENSIONS........................................................................................................................9
3.1 INSPECTIONOFPURCHASEDPRODUCT.............................................................................10
3.2 INSTALLATION CONDITIONS...................................................................................................10
3.3 HOWTOUSETHE GUN............................................................................................................10
3.4 STRUCTURESTOBEARRANGED.........................................................................................11
3.5 SAFETYPROCEDURESDURINGUSE..................................................................................11
4.1 PRESSUREDISCHARGEPROCEDURES..............................................................................12
4.2 ROUTINEMAINTENANCE..................................................................................................12
4.3 HOW TO USE THE SELFCLEANER..............................................................................13
4.4 TROUBLESHOOTING...................................................................................................14
WARRANTY
GUNASSEMBLING DRAWINGS

Page 5 of 14
USE AND MAINTENANCE MANUAL
®
WARNING
Themachine original configurationmust notbe modifiedin anyway.
Uponreceivingthe machinemake sure that:
+ The packaging isintact and undamaged.
+The supplycorresponds towhat hasbeen ordered.
+ In case of damage please call ASTURO ORIGINALI MAVES Spa
INFORMATION LETTER
The following maintenance and instruction manual is an integral part of the machine and
mustalwaysbeavailabletothepersonnelin charge of usingandmaintainingit.Theoperator
andthepersonnelinchargeofhandlingthemachinemusthaveknowledgeofthe contents of
the manual. The descriptions and illustrations in the manual are not to be considered as
binding.Althoughthe main featuresof themachine describedin thismanual arenot subject
to changes, ASTURO ORIGINALI MAVES Spa reserves the right to change those
components, details and accessories it deems necessary to improve the machine or to
meetmanufacturingorcommercialrequirements,atanytimeandwithoutupdatingthismanual
immediately. WARNING
ALL RIGHTS ARE RESERVED. The reproduction of any part of this manual, in any given
form, without prior written authorization from ASTURO ORIGINALI MAVES Spa, is strictly
forbidden. The content of this manual can be modified without prior notice. Great care has
beentakenincollectingandchecking the documentationcontainedinthismanual in orderto
make it as complete and comprehensible as possible. ASTURO ORIGINALI MAVES Spa
machines are not designed to function in areas at risk of fires. For problems or information
callASTURO ORIGINALI MAVES Spa customercare technical serviceoryour local dealer.
CUSTOMERCARETECHNICAL SERVICE
ASTURO ORIGINALI MAVES Spa
Via Cascina Venina 20 B/C
20090 Assago (MI) ITALY
TEL. [phone] (6 lines R.A.)
FAX. ++39 0289305497
SITE: www.asturooriginalimaves.com
E-MAIL: [email protected]

Page 6 of 14
USE AND MAINTENANCE MANUAL ®
1.1 PACKAGING
K1 3A MIX gun is packaged in a cardboard box. All optional components are placed in the
sameboxasthegun.Whiletransportingand storing the machinemakesurethesurrounding
temperature remainsincluded between -15 and40 °C(5°F and 104°F). Iftransportation or
storage operations lastno longer than 24 hours do notexceed 50°C (122°F), otherwise the
unitcould bedamaged.
If the need arises to store the machine, make sure the humidity values in the storage area
remain included between 30 and 80%.
2.1 IDENTIFICATION DATA
Thedevicehasononeof its sides themanufactureridentificationandCE RULING n°89/392
conformityidentification,as shown below.
l
K1 3A MIX
MODEL
CEMARK
AOM
MANUFACTURER

Page 7 of 14
USE AND MAINTENANCE MANUAL
®
2.2 MACHINE DESCRIPTION
K13AMIX gun isusedto spraypaints.With this gunit is possibleto obtain smoothandeven
surfaces thanks to its micro-spraying system and reduced overspray. Its main features are
lightness(677 g/24oz.) andeasyuse. TheK1 3AMIXoffers thepossibility ofadjustingthe
sprayfaninordertoobtainahighqualityfinishing.TheK13AMIXgun,coupledwithapneumatic
pump unit, type mixed air, model K15ASTURO, guarantees high transfer efficiency (over
80%)andsavesconsiderableamountsofpaint.TocompleteK13AMIXalreadyhightechnical
features,itis alsoprovided with arapid systemfor nozzlecleaning in caseit getsobstructed
duringpainting operations.The drawingbelowindicates themostimportant featuresof the
gun.
Safety trigger lock
Nickled brass air inlet
(thread 1/4 gas)
Wheel for regulation fan air
quantity.
Wheel for paint quantity control.
Hook to hang gun
Gun body made of aluminum
alloy (heavy anodizing).
Rapid self-cleaner for possible
nozzle obstruction (PATENTED
system)
Cap with painting
fan control
Stainless steel
filter holder

Page 8 of 14
USE AND MAINTENANCE MANUAL ®
2.3 TECHNICAL FEATURES
Thespraygunmustbe coupled withapumpwith a maximumfluidpressureof 140 bar(2000
psi).ASTURO ORIGINALI MAVES Spa carriesout all thenecessarytestsonthe paintunit
beforedelivering itto itscustomers.
NOZZLE AND GUN TECHNICAL FEATURES TABLE
NOZZLE SPRAY
ANGLE 30Cm SPRAY OPENING ORIFICE mm ORIFICE IN INC PRODUCTS FILTER
7x20 20° 13.5
7x40 40° 16.5
9x20 20° 14
9x40 40° 17.5
9x60 60° 22.5
11x10 10° 9
11x20 20° 14.5
11x40 40° 18.5
13x20 20° 15.5
13x40 40° 20
13x60 60° 26.5
15x20 20° 16.5
15x40 40° 21.5
18x10 10° 12.5
18x20 20° 16.5
18x40 40° 20.5
18x60 60° 29.5
21x10 10° 13.5
21x20 20° 18.5
21x40 40° 21.5
21x60 60° 32.5
THIXOTROPIC, SPRAY
STUCCOS, FILLED BASES,
INORGANIC ZINC, VERY
THICK PAINTS, PAINTS WITH
GLUES, FILLERS
0.011"
YELLOW
100 M
WHITE 60
M
RUSTPREVENTER PAINTS
RED
200M
0.33 0.013"
CLEAR AND PIGMENTED
LACQUER,ENAMELS
NITRE, SYNTHETIC AND
POLYURETHANE PAINTS
0.15 0.007"
0.38 0.015"
0.23 0.009"
0.28
0.53 0.021"
0.46 0.018"
CHARACTERISTICS VALUE
Air max. pressure 5 Bar/71.4 psi
Air working pressure 1-2,5 Bar/14.28-35.7 psi
Working prod. pressure 20 - 100 Bar/290-1430 psi
Product max. pressure 140 Bar/2000 psi
Nozzles (microinches) 007-021
Weight 677 g/24 oz.
Air inlet M 1/4"
Product inlet M 1/4"
Nozzle maximum measure: 0.021"
Theabovetechnicalfeaturesareonly exemplifying and may vary without prior notice.
2.4 STANDARD AND OPTIONAL COMPONENTS
Themachineis deliveredwiththe followingstandard components:
+1 - Dismantling wrench.
+1 - Cleaningbrush.
+1- Useand maintenancemanual.
+1 - Declarationofconformity to CERULINGS.
+1 - Warranty certificate.
On request:
+ TRI-AMIXnozzlesofvariousdimensions.
+ K 15 high pressure PUMP.
+ Connectionhoses.
+ Cleaningneedles.
+ Paint filters 60, 100, 200 MESH

Page 9 of 14
USE AND MAINTENANCE MANUAL
®
2.6 DIMENSIONS
The gun has the following dimensions:
DO NOT USE THE PAINTING SYSTEM WITH
FLAMMABLE OR HIGHLY TOXIC PRODUCTS
SUCH AS GASOLINE, HERBICIDE AND PESTICIDE
2.5 MACHINABLE PRODUCTS
TheK1 3AMIX guns aredesigned topainton iron,wood and plasticmaterial.
Thematerialswhichcanbeusedwiththegunare:syntheticpaintsandenamels,polyutherane,
nitre, enamels, varnishes, water based paint, lacquers and primers.
The manufacturer must authorize the use of the unit with other products and consequently
the unit technical features must be changed in order to function properly with the alterna-
tivematerials. ASTURO ORIGINALI MAVES Spa isrelieved ofallresponsibility incase of
accidentsresultingfromtheuseofthemachinebyUNAUTHORIZEDandunqualifiedpersonnel
orbypersonnelusingthe machinedifferentlythanintended.
l
160 mm
210 mm
Filter ring cap with connection M1/4’’

Page 10 of 14
USE AND MAINTENANCE MANUAL ®
3.1 INSPECTION OF PURCHASED PRODUCT
Inspect the equipment before its use to check for damages caused by transportation or
improper storage. Make also sure that all standard and optional components have been
delivered.
3.2 INSTALLATION CONDITIONS
Thegun mustbe fedwitha maximumfluid pressureof140 bar(2000 psi).
Itis advisableto usedrycompressed airto obtainthebest paintingresults.
Tomount thedouble hose (air/product)proceed asfollows (usethe drawingbelow):
+Fastenthe air inlethose (BLUEhose) tothe gunbuckle (A).
+Fastenthepaint inlethose (LIGHT BLUEhose) tothe gun buckle(B).
+Choose which nozzles and spray gun filter better adapt to the operation which must be
performed.
WARNING
Ononesideofthepumpcart(K15)thereisaunitformedbytwofilterswithpressureregulators.
Finding the M1/4” air outlet connector (which
mustbeconnected to thegun airbuckle “A”) is
fairlysimple sincethereareonlytwoconnectors
fortheairconnection;theotheroneisthepump
airinlet.
WARNING
Always use high pressure hoses to carry out all
connections.Beforeusingtheequipment,makesure
the connections and hoses are in perfect working
conditions,thatiswithoutholes,bendsorsplits.
3.3 HOW TO USE THE GUN
+Regulate the spraying angle (fan) by the
wheel(1)(byopeningthewheel,youwillopen
thesprayingangle).
+Regulatesprayingfanpositionbyturningthe
cap(3), seedrawing below.
+Graduallyopenthe fluid passageby turning
the wheel (2) until the desired quantity is
obtained.Checktheregulation on asmooth
trialsurfaceuntil reachingthe desiredfan.
FAN POSITION
(3)
(B)
(A)
(4)
(1)
(2)

Page 11 of 14
USE AND MAINTENANCE MANUAL
®
3.4 STRUCTURES TO BE ARRANGED
Painting operations MUST be possibly carried out in an appropriate spray booth equipped
withafilteringsystem. Do notuse the gunifthe filtering systemisnot activated.Alwayswear
protectiongloves,glasses, breathingfilters with activecarbon andadequate clothing forthe
protectionof the entirebody.
3.5 SAFETY PROCEDURES DURING USE
TO USE thepaintingunitSTRICTLY OBSERVE thefollowingprecautionsandsafetycriteria,
whichfollows.
ASTURO ORIGINALI MAVES Spa declines every responsibility whatsoever in case the
userdoesnot observe saidprecautionsand safetycriteria; furthermore,it isnotresponsible
foranykind of negligencewhen using theequipment.
WARNING
Always wear protective gloves, masks, breathing filters with activated carbon and
adequateclothing for theprotection ofthe entirebody.
The gun is employed with paints and thinners which are higly inflammable, therefore,
use the gun in well ventilated areas and avoid any action which might start a fire (eg.
smoking,high temperature slagsor shavings,sparks orwhatever electricrisks).
CHECKthechemicalcompatibilityoftheproductsontheir technicalsafetycharts.Further
informationonthematerialswhichmakeupthegunareavailable,onrequest,atASTURO
ORIGINALI MAVES Spa.
Theuseofproductswhichcontainorganicsolventsmightcauseintoxicationbecauseof
thecreatedtoxic vapours.
DONOT USEthe unitwith foodormedicines.
DO NOT EXCEED the indicated maximum working pressure (see section 2 or 3).
BEFORE starting on any dismantling, cleaning, maintenance or assembly operation
DISCHARGEthe pressurein thehoses (seesection 4.1).
Neverdirectthe gun towardshuman bodyoranimals.
IMPORTANT
DO NOT USE the unit with HALOGENATED HYDROCARBON thinners
(eg. Ethylchloride, Trichloride, etc.) which might explode when coming
into contact with aluminum or galvanized parts.

Page 12 of 14
USE AND MAINTENANCE MANUAL ®
4.1 PRESSURE DISCHARGE PROCEDURES
Whenstopping the systemto carryout operationson theunit, orwhen stopping itat theend
ofthe workingday,the highpressure insidetheunit mustbecompletely discharged.When
themain airinlet isshut off, theair isautomatically dischargedfrom thepumpmotor.
WARNING
The product in the flexible tube is still under pressure.
PROCEEDAS FOLLOWS:
1Lockspray gunlever withthe safetytriggerlock (4) (seepag. 7).
2Shutoffthe air supplyto the equipment.
3Unlocktheleversafetybolt.
4Takea metal bucket, makesureit is firmlyfixed ontheground and keepthe spraygun
pressedtightlyagainst thewalls ofthe bucket. Pulllever todischarge theproduct.
4.2 ROUTINE MAINTENANCE
The routine maintenance of the K1 3A MIX gun is simple and does not require special
operations because its components do not need to be lubricated. Clean the gun daily or at
the end of each working session so that product residues will not dry out on its walls, thus
guaranteeinglongterm efficiency.
CLEANING:
Unscrew the cap clamping ring, remove the self-cleaner and dismantle the nozzle. Place
everythinginthe thinner.Carefullyclean the nozzle,dipitinthinnertodissolveresiduesinside
ofit. Blowcommpressedair throughtit fromthe front toeliminateall tracesofmaterial. The
nozzlemustbedailymountedbackon with its gasket. Clean the head ofthegunandthetipof
the nozzle with the provided brush; at least once a week dismantle and clean the product
needletoo.Reassemblethegun, lubricate the threads with athinlayerofoil,andclosetightly.
DO NOT USE POINTED METAL OBJECTS TO CLEAN CLOGGED PASSAGE HOLES.
THESE OPERATIONS WOULD DAMAGE THEM, REDUCING THE SPRAYING
QUALITY.
Cleanthebody of thepumpwithaclothsoakedinthinner.Incaseindustrialwashers are used
toclean thegun, closethe fan adjustmentandthe needleadjustment tightlyby turningthem
clockwise in order to avoid thinner infiltrations which in the long run may damage gaskets.
Onceinawhile,lubricatethethreadedpartssuchasthecapclampingring,theneedleadjustment
and the air valve cap (including the dip rod) with a thin layer of synthetic oil, in order to avoid
seizingupcausedbytheeffectofthinnersontheguncomponents.
THE LUBRICANTS USED MUST NOT CONTAIN SILICONE.
WARNING
IF THE NEEDARISES CALL THEASTURO ORIGINALI MAVES Spa CUSTOMER CARE
SERVICE.

Page 13 of 14
USE AND MAINTENANCE MANUAL
®
4.3 HOW TO USE THE SELF-CLEANER
The K1 3A MIX gun is provided with a nozzle self-cleaning system; such system has been
designedtopreventexpensiveproductionstandstillsdueto the need todisassemblethegun
eachtime the nozzleclogs. Ifpaint impuritiesget tothe nozzleand clogit,toclean itsimply:
+Turn lever“1”180°counterclockwise.
+Pointthegun towardsa container,andthen pressthe delivery leverto letthe paintout.
+urnlever “1” 180° clockwise.
+Resumepainting.
WARNING
It is possible to distinguish the cleaning position from the spraying position: one
side reads “SPRAY SIDE”.
(1) (1)
LEVER POSITION FOR PAINT
NOZZLEAUTOMATIC CLEANING
LEVERPOSITION FOR NORMAL
PAINTING
SPRAY SIDE

Page 14 of 14
USE AND MAINTENANCE MANUAL ®
4.3 TROUBLESHOOTING
Thechapterdescribes howto solvethe mostcommon problems whichcould affectthe unit.
Theproblem is indicatedby thefollowing symbol:(6)
Thepossible causeis indicatedby thefollowingsymbol: (A)
Thepossible solution isindicated bythe followingsymbol: (l)
6IRREGULARFANCLOSING?
A Clogged cap air holes.
A Damaged joint gasket.
lCleantheair holes.
lReplacethe gasket.
6 UNEVEN JET?
AWorn ordirty capairholes.
AWornordirtynozzle.
lCleantheguncomponentscarefully.
lReplace damaged parts.
6PAINTLEAKS OUTOFTHESTUFFING BOX?
AWorn stuffingboxgasket.
ALoosestuffingbox nut.
lReplacestuffingbox.
lReplacestuffingboxnut.
6PAINTLEAKSOUTOFNOZZLE WITHOUTPULLINGTHE LEVER?
ABall andball seatdirty ofdrypaint.
AWorn balland ballseat.
ALoosenozzletip.
ADirty nozzle tipcone.
lCleanthegunpartsvery carefully.
lReplaceboth the balland seat.
lTightentip.
lCleancone and tightentip.
6 AIR COMES OUTWHEN THE LEVER IS RELEASED?
AThe airvalve roddoesnot slide.
A Dirt inside the air valve body.
AAir stuffing box nuttootight.
lLightlylubricateguncomponents.
lCleanwithcare.
lLoosenstuffingboxnut.

NAME:
COMPANY:
ADDRESS:
V.A.T.NUMBER
UNITMODEL:
SERIALNUMBER:
DATE:
STAMPAND SIGNATURE:
WARRANTY
AllASTURO ORIGINALI MAVES Spa appliancesareguaranteedfor a periodof12months
from the date written on the invoice, unless otherwise stated in writing. The warranty
covers all manufacturing faults and material defect. Replacements and repair operations
are covered only if carried out by our company and at our servicing shops.
The faulty parts must be sent CARRIAGE FREE.
Once the components have been repaired they will be sent CARRIAGE PAID to the
customer.
The warranty does not cover our company personnel aid during installation or dismantling
operations. If for practical purposes one of our employee is sent to the premises, a
charge will be made for the time plus extra for travelling and expenses.
Our warranty does not cover direct or indirect damage, to people or property, caused by
our appliances and it does not cover repair operations carried out by the owner or by a
third party.
The following are not covered by our warranty:
+ failure caused by incorrect use or assembly.
+ failure caused by external agents.
+ failure caused by lack of maintenance or negligence.
WARRANTY FORFEITURE:
If the form attached below is not filled out and returned.
In case of delayed payment or other contract defaults.
All repair operations carried out under warranty do not interrupt its duration.
Whenever changes or repairs are carried out on our machinery without prior authorization
Whenevertheunit seems tamperedwith,dismantled orpreviouslyrepaired in unauthorized
servicing shops.
Whenever the serial number is damaged or removed.
When the damage is caused by improper use or functioning, or if the machine falls, is
bumped or by other causes of malfunctioning not due to normal working conditions
All disputes will be settled in the court of justice of Milan (Italy).
Send this form fully completed (capital letters) to:
ASTURO ORIGINALI MAVES Spa
Via Cascina Venina 20 B/C
20090ASSAGO (MI) ITALY

GUN ASSEMBLING DRAWINGS
1
USE AND MAINTENANCE MANUAL
K13AMIXRev.42007
®
18
19
4
3a
5
6
7
12
13
15
14
16a
16 8
911
10
17
2
3

GUN COMPONENTS
USE AND MAINTENANCE MANUAL ®
K13AMIXRev.42007
1
2
3
3a
4
5
6
8
9
11
12
13
14
15
16
16a
17
18
19
7-10
25520R
25602R
201126*
25547R
TRxxxx
201127/2007
25509R
25560R
25639R
25503R
27025R
25645R
16585A
24043R
16584A
25603*
24094R
24097R
25577R
CAPCLAMPINGRING K1MIX-3AMIX
FRICTIONRINGPTFE
CAPK1 3AMIX COMPLETE
CAPAIR SEP.GASKETMIXT.N
TRI-AMIXNOZZLE
TRI-AMIXJOINTGASKETVers.2007
NEEDLE-NOZZLEKITMIX2004
COMPLETESECURITYFORMIXT.N
PACKINGGLAND
COMPLETEBODY LEGEND3AMIX
JETADJUSTERT.N.COMPL.
THRUSTBEARING WITH SPRING AND BASE
AIRVALVE PRESSURETIGHTNESSKIT
AIRVALVEPLUG
COMPLETEAIRVALVE
OR( ONLYWITH COD.25589R)
3AMIXFILTER HOLDERWITH FILTER 100ME
WRENCHLEG.3AMIX-MIXCOMPL.
NYLONBRUSH
COMPL.CONTROLLEVERMIX
25589R KIT GASKETSAND SPRINGS
Description
Teflonfrictionring
Capairseparinggasket
Teflon seal for spraying nozzle
Headcone packing
Packingneedlespring
Flatring
Airvalve stuffing boxneedle
Airvalvespring
Or2037
Base for new mix spring
Or3030(16a)
Mixneedlepushingspring
Completelegend airvalvebar 2004
Q.ty
1
1
1
1
1
1
1
1
1
1
1
1
1
Pos. CODE Description
Warning: items not sold separately