USE AND MAINTENANCE MANUAL
Page 4 of 14
®
GENERAL CONTENTS
HOWTOUSE THEMANUAL...........................................................................................4
SYMBOLS USED.........................................................................................................4
INFORMATION LETTER.......................................................................................5
1.1 PACKAGING..............................................................................6
2.1 IDENTIFICATIONDATA.......................................................................................6
2.2 EQUIPMENT DESCRIPTION..................................................................................7
2.3 TECHNICALFEATURES......................................................................................8
2.4 STANDARDAND OPTIONAL COMPONENTS......................................................8
2.5 PAINTS, FLUIDSAND ADEQUATE PRODUCTS...............................................9
2.6 DIMENSIONS......................................................................................9
3.1 INSPECTION OF PURCHASED PRODUCT..........................................................10
3.2 INSTALLATION CONDITIONS.....................................................................10
3.3 EQUIPMENT AND CONDITIONS NEEDED TO WORK........................................10
3.4 SAFETY PROCEDURES DURING USE.....................................................11
4.1 PRESSURE DISCHARGE OPERATIONS...............................................13
4.2 ROUTINE MAINTENANCE.......................................................................13
4.3 REPLACEMENT OF THE STUFFING BOX.............................................14
4.4 TROUBLESHOOTING......................................................................14
WARRANTY
GUN ASSEMBLING DRAWINGS
HOW TO USE THE MANUAL
Thefollowingmanual is a document that accompaniesthemachine thouroughout its lifetime.
It is, therefore, an integral part of the machine. Carefully read the following warnings and
proceduresbeforeengaging inanyactivitywiththis machine,includinghandlingand unloading
itfromits transportation mean.
SYMBOLS USED
All operations which might be dangerous if not performed correctly are indicated with the
following symbol:
All operations which, in order to avoid risks, must be performed by trained and authorized
personnelare indicated by thefollowing symbol:
All personnel in charge of using the machine must be thoroughly trained; all the above
information must be thouroughly understood and applied.
