APARTMENT B NOOK User manual

NOOK
ASSEMBLY INSTRUCTIONS
1270
950
Aust. Design Reg. no 201711369

STEP 1
Attach (T1) Back panel to (T2) RHS Back panel
(5x M6-16 screws)
STEP 2
Attach STEP 1 to (T3) LHS Back panel
(5x M6-16 screws)
STEP 3
Attach (T4) RHS Front panel to (T2) RHS Back panel
(5x M6-16 screws)
STEP 4
Attach (T5) LHS Front panel to (T3) LHS Back panel
(5x M6-16 screws)

STEP 5
Insert (T6) Floor Brace to (T4 and T5)
LHS and RHS panels at ground level
STEP 6
Attach (T7) Rear Top panel to
(T2 and T3) RHS and LHS Rear panels
(10x M6-16 screws)
STEP 7
Attach (T8) Front Top panel to (T4 and T5)
RHS and LHS Front panel
(8x M6-16 screws)
B
B

STEP 8
Attach x4 Corner Brace Brackets
(8x M5-12 screws)
Fasten x4 self drilling screws to each of the (T6) Floor
Brace to the corner flaps pre-aligned hole points
STEP 9, 10 & 11
9. Put locker in place and mark 12 prefered hole locations
10. Remove locker and drill holes
11. Reposition locker and bolt to the ground or base with
fasteners provided
(12x M8 50mm Hex Head Coach Screws and plugs)
STEP 12
Attach (T9) Door to (T5) side panel with x3 hinge pins
Slots for hinge adjustment are provided for minor door
adjustment
C
C
I
I
I
I
I
I
I
II
I
I
I
I
I