Aplex ACS-266XC User manual

ACS-266XC User Manual
1
ACS-266XC
Box PC User Manual
Revision
Date
Version
Remark
July. 2014
V1.1
Oct. 2014
V1.2
Operating and Storage Temperature revised
®2014 Aplex Technology, Inc. All Rights Reserved. Published in Taiwan
Aplex Technology, Inc.
15F-1, No.186, Jian Yi Road, Zhonghe District, New Taipei City 235, Taiwan
Tel: [phone] Fax: [phone] E-mail: [email protected] URL: www.aplex.com.tw

ACS-266XC User Manual
2
Warning!___________________________________
This equipment generates, uses and can radiate radio frequency energy and if not installed and
used in accordance with the instructions manual, it may cause interference to radio communications.
It has been tested and found to comply with the limits for a ClassA computing device pursuant to
FCC Rules, which are designed to provide reasonable protection against such interference when
operated in a commercial environment. Operation of this equipment in a residential area is likely
to cause interference in which case the user at his own expense will be required to take whatever
measures may be required to correct the interference.
Disclaimer
This information in this document is subject to change without notice. In no event shall Aplex Technology
Inc. be liable for damages of any kind, whether incidental or consequential, arising from either the use or
misuse of information in this document or in any related materials.
Electric Shock Hazard –Do not operate the machine with its back cover removed. There are
dangerous high voltages inside.

ACS-266XC User Manual
3
Table of Contents______________________
Warning!…………………………………………………………………………….……..….2
Disclaimer………………………………………………………………….…………………2
Chapter 1 Getting Started
1.1 Specifications……………………………………….……………………..5
1.2 Dimensions………………………………...………………………….......6
1.3 Brief Description…………………………………………………….……10
Chapter 2 Hardware
2.1 Specifications……………..…….……………………………………..…..13
2.2 Board Dimensions…………………………………………………………15
2.2 Jumpers and Connectors Location……………………………………...17
2.3 Jumpers and Connectors………………………...………………………19
Chapter 3 BIOS Setup
3.1 Operations after POST Screen..........................................................44
3.2 BIOS SETUP UTILITY..........................................................................44
3.3 Main Settings…....................................................................................45
3.4 Advanced Settings............................................................................... 46
3.5 Chipset Settings……………................................................................. 52
3.6 Boot Settings....................................................................................... 55
3.7 Security Settings.................................................................................. 57
3.8 Save & Exit Settings.………………………...…………………………….59
Chapter 4 Installation of Drivers
4.1 Intel Chipset Driver.…………………………...…………………………62
4.2 Intel Graphics Media Accelerator Driver...…………………..…………..65
4.3 Intel 82583V Network Adapter……………………………………….….68
4.4 Realtek HD Audio Driver Installation…….…………..…………………71
Figures
Figure 1.1:Dimensions of ACS-2663C…………………………………..…....7
Figure 1.2:Dimensions of ACS-2664C…………………………………..…....8
Figure 1.3:Dimensions of ACS-2665C…………………………………..…....9
Figure 1.4:Front view of ACS-2663C…………………………………..…....10
Figure 1.5:Rear view of ACS-2663C…………………………………..…....10

ACS-266XC User Manual
4
Figure 1.6: Front view of ACS-2664C…………………………………………11
Figure 1.7: Rear view of ACS-2664C…………………………………………11
Figure 1.8: Front view of ACS-2665C…………………………………………12
Figure 1.9: Rear view of ACS-2665C………………………….…………….12

ACS-266XC User Manual
5
Chapter 1 Getting Started
1.1 Specifications
Model
ACS-2663C
ACS-2664C
ACS-2665C
System
Processor
Intel Atom Processor D2550 1.86GHz , L2 Cache 1MB
System chipset
Intel NM10 Express
System memory
1 x SO-DIMM 204pin, up to 4GB DDR3 800/1066MHz FSB
IO Port
USB
4 x USB 2.0 type A
Serial/Parallel
3 x RS-232, 1 x RS-422/485 selectable default RS-485
Audio
1 x Line out phone jack, 1 x MIC in phone jack
Graph
1 x VGA
LAN
2 x GbE R-J45
Digitl I/O
None
KB/MS
None
Power
3 pins terminal block
Storage Space
HDD
1 x 2.5” SATA
Movable device
1 x external CF slot
Expansion
On board expansion
bus
1 x mini PCIe
Expansion slot
None
1 x PCI
2 x PCI default,
1 x PCI + 1 x PCIe for
option
Power
Power input
9~36V DC
Mechanical
Construction
Sliver aluminum chassis with aluminum heat-sink
IP rating
None
Mounting
Wall Mounting
Dimension(mm)
268 x 195 x 74.6
268 x 240 x 80
(mount kit)
268 x 195 x 101.8
268 x 240 x 104.8
(mount kit)
268 x 195 x122.7
268 x 240 x 125.7
(mount kit)
Net weight(Kgs)
4.8
5.0
5.5
Environment

ACS-266XC User Manual
6
Operating
temperature(°C)
Standard: 0°C to 50°C
WT1: -20°C to 60°C for option
WT2: -20°C to 70°C for option
Storage
temperature(°C)
-20°C to 60°C
-40°C to 70°C for WT1 and WT2 option
Storage humidity
10 to 90%@ 40℃, non-condensing
Certification
CE / FCC Class A
Operating System
Support
Win 7, WES7, XP, WIN CE 6.0
1.2 Dimensions

ACS-266XC User Manual
7
Figure 1.1: Dimensions of ACS-2663C

ACS-266XC User Manual
8
Figure 1.2: Dimensions of ACS-2664C

ACS-266XC User Manual
9
Figure 1.3: Dimensions of ACS-2665C

ACS-266XC User Manual
10
1.3 Brief Description of ACS-266XC
ACS-266XC is a Fan-less wall mounting and ultra-compact standalone Box PC, powered by an Intel
Atom Processor D2550 1.86GHz , L2 Cache 1MB and supporting 4 x USB, 1 x SATA HDD space, DC
9~32V DC etc. ACS-266XC works very well along with any of our Display Monitor series and it
absolutely can provide an easy way to perform control and field maintenance.
Figure 1.4: Front view of ACS-2663C
Figure 1.5:Rear view of ACS-2663C

ACS-266XC User Manual
11
Figure 1.6 Front view of ACS-2664C
Figure 1.7 Rear view of ACS-2664C

ACS-266XC User Manual
12
Figure 1.8:Front view of ACS-2665C
Figure 1.9:Rear view of ACS-2665C

ACS-266XC User Manual
13
Chapter 2 Hardware
ASB-M7101 is a Mini-ITX industrial motherboard developed on the basis of Intel D2550 and NM10, which
provides abundant peripheral interfaces to meet the needs of different customers. Also, it features dual
1000M LAN port, 6-COM port and one Mini PCIE configuration. To satisfy the special needs of high-end
customers, PC104+ socket (capable of adjusting IO voltage) richer extension functions. The product is
widely used in various sectors of industrial control.
2.1 Specifications
Specifications
Board Size
170mm x 170mm
CPU Support
Intel Atom D2550 /1.86GHz (2cores,10W, onboard)
Intel Atom N2800 /1.86GHz (2cores,6.5W, option）
Intel Atom N2600 /1.60GHz (2cores,3.5W, option）
Chipset
Intel NM10 Express
Memory Support
2 x SO-DIMM (204pins)
D2550：up to 4GB DDRIII 800/1066MHz FSB
N2800：up to 4GB DDRIII 1066MHz FSB
N2600：up to 2GB DDRIII 800MHz FSB
Graphics
Integrated Intel GMA3650 (D2550/N2800)
Integrated Intel GMA3600 (N2600)
Display Mode
1 x CRT Port (VGA or VGA_PH)
1 x LVDS1 (18/24-bit single LVDS, option)
1 x LVDS2 (24-bit dual LVDS, option)
Support
Resolution
Up to 1920 x 1200 for CRT
Up to 1440 x 900 for LVDS1 (D2550)
Up to 1366 x 768 for LVDS1 (N2600/N2800)
Up to 1920 x 1200 for LVDS2 (D2550)
Up to 1600 x 1200 for LVDS2 (N2600/N2800)
Dual Display
CRT+LVDS1
CRT+LVDS2
Super I/O
Winbond W83627UHG
BIOS
AMIBIOS
Storage
2 x SATA Connector

ACS-266XC User Manual
14
1 x Compact Flash II Slot for TB-522 or TB-523 (option）
Ethernet
2 x PCIe Gbe LAN by Intel 82583V
USB
4 x USB 2.0 stack ports for external
3 x USB 2.0 box Pin header for MIO1
1 x USB 2.0 internal for mini PCIe
Serial
1 x RS232/422/485 port, DB9 connector for external (COM1)
pin 9 w/5V/12V/Ring select
1 x RS232 port, DB9 connector for external (COM2)
pin 9 w/5V/12V/Ring select
1 x RS232 header for internal (COM5)
1 x RS232 header for internal (COM6),pin 10 w/5V/12V select
I/O Card TB-522/TB-523:
1 x 422/485 select header for internal MIO1 (COM3)
1 x RS232 header for internal MIO1 (COM4)
Digital I/O
8-bit digital I/O by Pin header for MIO2
4-bit digital Input
4-bit digital Output
Battery
Support CR2477 Li battery by 2-pin header
Audio
Support Audio via Realtek ALC662 HD audio codec
Support Line-out, MIC by JACK
Support Line-in, Line-out, MIC by 2x6-pin header
Keyboard /Mouse
PS2 K/B and Mouse by MIO2
1 x PS/2 keyboard
1 x PS/2 mouse
Expansion Bus
1 x PC 104+ connector (PCI master 4, jumper for +3.3V & 5V select)
2 x PCI-express 1X extend by 4x10 pin socket (PCIe1 option)
1 x mini-PCI-express slot (PCIe1 option：MPCIE or PCIE1X）
1 x CRT 2x6 Pin Header
Power
Management
1 x 3-pin power input connector (Wide range DC+9V~32V)
DC12V output by 2x2 pin Connectors
Switches and
LED Indicators
Power on/off switch by TB-522 or TB-523
Reset switch by MIO2
Power LED status by MIO2
HDD LED status by MIO2
External I/O port
2 x COM Ports (COM1/COM2)
4 x USB 2.0 Ports (stack)
2 x RJ45 GbE LAN Ports

ACS-266XC User Manual
15
1 x CRT DB15 Port
1 x Audio Ports (mic, line out)
Watchdog Timer
Software programmable 1 –255 second by Super I/O
Temperature
Operating: -20℃to 70℃
Storage: -40℃to 85℃
Humidity
10% - 90%, non-condensing, operating
Power
Consumption
12V /1.25A (Intel Atom D2550 processor with 2GB DDR3 DRAM)
12V /1.18A (Intel Atom N2800 processor with 2GB DDR3 DRAM)
12V /0.95A (Intel Atom N2600 processor with 2GB DDR3 DRAM)
EMI/EMS
Meet CE/FCC class A

ACS-266XC User Manual
16
2.2 Board Dimensions

ACS-266XC User Manual
17
2.3 Jumpers and Connectors Location
Board Top

ACS-266XC User Manual
18
Board Bottom

ACS-266XC User Manual
19
2.4 Jumpers Setting and Connectors
1. JP1:
(2.0mm Pitch 1X3 Pin Header)CMOS clear jumper, CMOS clear operation will permanently reset old
BIOS settings to factory defaults.
JP1
CMOS
Close 1-2
NORMAL (Default)
Close 2-3
Clear CMOS
Procedures of CMOS clear:
a) Turn off the system and unplug the power cord from the power outlet.
b) To clear the CMOS settings, use the jumper cap to close pins2 and 3 for about 3
seconds then reinstall the jumper clip back to pins open.
c) Power on the system again.
d) When entering the POST screen, press the <F1> or <DEL> key to enter CMOS Setup
Utility to load optimal defaults.
e) After the above operations, save changes and exit BIOS Setup.
2. BAT1:
(1.25mm Pitch 1X2 Pin wafer connector) 3.0V Li battery is embedded to provide power for CMOS.
Pin#
Signal Name
Pin1
VBAT
PIN2
Ground
3. PS_SEL1(option):
(2.0mm Pitch 1X3 Pin Header),DC in Power andATX 12V IN Power jumper setting.
PS_SEL1
Mode
Close 1-2
DC IN Power (Default)
Close 2-3
ATX 12V_IN (ATX Power)
4. PS_ON:
(2.0mm Pitch 1X3 Pin Header),ATX Power and Auto Power on jumper setting.
JP2
Mode (DC_IN)
Close 1-2
Auto Power on (Default)
Close 2-3 or Open 1-2
ATX Power

ACS-266XC User Manual
20
5. DCIN:
(5.08mm Pitch 1x3 Pin Connector),DC9V ~ DC32V System power input connector。
Pin#
Power Input
Pin1
DC+9V~32V
Pin2
Ground
Pin3
PG
Power Mode
Location : DCIN
(5.4.5.)
Location: ATX12V
(5.4.6.)
Location: ATX1
(5.4.7.)
DC INPUT
(Default)
input
DC9~32V
output
DC 12V
NC
ATX Power
(option)
NC
Input (DC12V)
ATX Power 2*2P
PSON,GND,5VSB
ATX Power
6. ATX12V:
(2x2 Pin Connector),DC12V System power output connector.
Pin#
Power output (DCIN)
Pin1
Ground
Pin2
Ground
Pin3
DC+12V
Pin4
DC+12V
7. ATX1 (option):
(2.0mm Pitch 1X3 Pin wafer connector),connect PSON and 5VSB and Ground signal,support ATX
Power model. Reserved.
Pin#
Signal Name
Pin1
ATX PSON
PIN2
ATX Ground
PIN3
ATX 5VSB
8. U2:
(FCBGA559), onboard CPU .