APM Base Unit for Power Over Ethernet APM-201 User manual

1 of 1
APM CO., LTD
APM-201
Base Unit for Power Over Ethernet
1. Features：
1.1. Single-Port Power Injector
1.2. IEEE 802.3af compliant
1.3. No Software Required
1.4. Easy to Install
1.5. Use Existing Ethernet Cable
2. In
p
ut S
p
ecifications：
2.1. Power Interface ：DC Jack
(
See Pin Assi
g
nment
)
2.2. Data Interface ：RJ-45
j
ack
(
See Pin Assi
g
nment
)
2.3. Input Volta
g
e ：48V ± 10 % * Applied from External Switchin
g
Adapter
(
90 ~ 264Vac
)
2.4. Input Current ：400 mA Max.
3. Out
p
ut S
p
ecification：4. General Specification：
3.1. PD Detection & Classification ：4.1. Operating Temperature ：0℃~ +50℃
IEEE 802.3af compliant 4.2. Storage Temperature ：-20℃~ +70℃
3.2. Interface ：RJ-45
j
ack
(
See Pin Assi
g
nment
)
4.3. Humidity ：Up to 90 %
3.3. Output Volta
g
e ：48V ± 10 %
(
42,53
)
4.4. Cooling ：Free air convection
3.4. Output Current ：0.35 A Max.
3.5. Output Power ：15.4W Max.
3.6. LED Display ：PoE Not Active (Orange), PoE Active (Green)
5. Pin Assignment :
Pin LAN IN LAN Out Pin
1 Tx
(
+
)
Tx
(
+
)
1
2 Tx
(
-
)
Tx
(
-
)
2
3 Rx
(
+
)
Rx
(
+
)
3
4 N.C. +48V 4
5 N.C. +48V 5
6 Rx
(
-
)
Rx
(
-
)
6
7 N.C. GND 7
8 N.C. GND 8
6. Mechanical Dimension :
Units : m/m & Tolerance : 0.xx ± 0.2
5
1F, No.49, Alley 24, Lane 75, Sec 3, Kang-Ning Rd, Nei-Hu Dist, Taipei 114, Taiwan, R.O.C.
www.apm.com.tw [email protected] Tel: [phone] Fax: [phone]