
2 / 28
Safety Notes
・This manual includes the important information to use this machine safely. This
also includes useful information to prevent injury or damage to property. Please
read this manual carefully prior to connecting or operating the OMEGA.
・Keep this manual near the machine at all times.
Supply only specified voltage
・Do not connect to a power supply greater than the specified voltage. If voltage is
exceeded, electrical shock and /or damage to the unit may occur.
・Make sure that the electrical outlet is properly grounded. If the outlet is not
properly grounded, electrical shock and/or damage to the unit may occur.
Working ambient temperature and relative humidity
・This machine has been designed for use between 10~40 degrees C,10%~85%.
・Do not use this machine exceeding these conditions.
Setting temperature of the heater controller
・Do not set the temperature of the heater controller over 500 degrees C. It may
cause a malfunction.
Handle with care
・This machine is designed to use a solder feeder and hot iron for soldering.
Touching a heated soldering iron will cause severe burns. Make sure the iron has
cooled down before you are touching it for replacing the iron cartridge.
・Please handle this machine with care. If the machine is dropped or sustains great
impact / vibration, it may cause malfunction.
If you do not use the machine for a long time
・Please turn off the power, remove the power cable and keep it in a dry and cool place.
If you note malfunction on machine
・If the machine malfunctions, turn off the power immediately and contact the dealer
you purchased the machine from.
The warranty period
・The warranty period is one year after the product is delivered.
If an unexpected malfunction which our company bears responsibility occurs within
・the warranty period, we repair it in free of charge.
Immunity from responsibility
・We do not take any responsibility for damage caused by misuse, mistakes,
accidents, use in abnormal conditions or natural disasters, such as in an
earthquake, a fire etc.
・We do not take any responsibility on contingency loss, (Business loss, Business
stop, Overtime, Scrap or Reduced Output) caused by a machine stoppage or any
issues with Apollo Seiko spare & consumable parts.
・We do not take any responsibility for losses or damages caused by operating
with other means not mentioned in this manual.
・We do not take any responsibility for losses or damages caused by a wrong
connection with other equipment.
・If for any reason the internal circuitry is tampered with altered or repaired without
written consent of Apollo Seiko, the warranty is null and void. The customer is
allowed to make necessary tooling adjustments, replace solder iron tips and make
any necessary adjustments to the temperature controller.