Apollo Mini Series User manual

Mini
RADIO REMOTE CONTROL
AC version
Please read the handbook carefully before
operation to avoid any dangerous or damage
may be incurred
Nov 2012
HANDBOOK

Mini
INTRODUCTION
1
TAB E Of CONTENTS
1. Introduction ........................................................................................................................2
1.1 Features ...................................................................................................................2
2. Models................................................................................................................................2
3. Transmitter .........................................................................................................................2
3.1 Technical data. .......................................................................................................2
3.2 Indicator ................................................................................................................3
3.3 Power on steps .....................................................................................................3
3. Power off steps .....................................................................................................3
3.5 Standard mini butt on layout .................................................................................3
. Receiver .............................................................................................................................
.1 Technical data. .......................................................................................................
.2 Indicator .................................................................................................................
.3 Installation notes ....................................................................................................5
. Receiver installation illustration..............................................................................5
5. Trouble shooting-TX...........................................................................................................6
6. Trouble shooting-RX ..........................................................................................................6
7. Parts list .............................................................................................................................7
8. Wiriing diagram ..................................................................................................................7
9. Warranty.............................................................................................................................13

Mini
INTRODUCTION
Mini 20C
Mini 30C
1 step, ( 2 ) buttons
1 step, ( 3 ) buttons
Mini 0C 1 step, ( ) buttons
Mini 60C 1 step, ( 6 ) buttons
All models are equipped with RED EMS stop ( push type )
1. INTRODUCTION
INTRODUCTION
2. MODE S
3.1 TECHNICAL DATA:
Operation distance: 30M ( open space )
Frequency : FM 18/ 33Mhz
Output power : < 10mW
Response time: 100mS
Antenna: internal type
o o
Temperature: -10 C~+75 C
Source supply:1.5V(AA)*2pcs or rechargeable battery
Enclosure: IP65
Material: Industrial ABS + PC
Address code : 256 sets
Weight : 95 g ( excluding batteries )
Size: 126x50x29mm
3. TRANSMITTER
1.1 FEATURES:
1. Pocket-size transmitter, light ,more handy for operation.
2. Advance program design, quick & good performance on movements.
3. ABS +PC transmitter housing, water/shock/dust proof.
. Single-low button transmitter, compact and lighter design, ensure safe & convenient operation .
5. Receiver with -LED indicators, quick, simple judgement for operation status & after services repair.
Unit : mm
2

Mini
power off Indicator lights off ( EMS OFF )
stand-by ( power on )
RED/GREEN both indicators are NOT lighting ( EMS ON )
operation GREEN indicator light blinking
power low RED indicator light blinking ( when button pressed )
Power LED
s/no. label
inside of casing
EMS stop
battery AA*2
Function-button
OFF
ON
3.3 POWER-ON STEPS:
( 1 ) Power on receiver.
( 2 ) PUSH up the RED stop button to power on the transmitter.
( 3 ) Press any button and release, now MINI is ready to operate
( now receiver power LED lights GREEN )
3.4 POWER-OFF STEPS
( 1 ) Push down the RED stop button .
3.2 INDICATOR:
CAUTION:
Please take o t the batteries if long term period NOT operation.
3.5 STANDARD MINI BUTTON LAYOUT:
Mini20C Mini 0CMini30C Mini60C
3

Mini
4. RECEIVER
4.1 TECHNICAL DATA:
Frequency : FM 18/ 33Mhz
Sensitivity of RF:-110dBm
Antenna : internal type
o o
Operation Temperature : -10 C~+75 C
Source Voltage: 110/220/380/ 15VAC,50/60Hz
Enclosure: IP67
Consumption: <12W
Security Code: 256sets
Weight: 560g ( Including the 8 core cable, 2m )
protection: short protection
Color: Grey
BOX 1.1
20
12165
Frequency LIGHT
RED lights when TX is pressed ( in operation )
Light blinks slightly when buttons are released
(without operation )
Data LIGHT
RED when buttons are pressed ( in operation )
OFF when buttons are released (without operation )
RED light blinks slowly when data is incorrect
RED light blinks fast when ID codes are incorrect
Operation LIGHT
GREEN lighting when power on
Light OFF when EMS stop pressed or power off
Power LIGHT
Green lights when power on
Iill stration description
S/No. ID LABEL:
Each MINI unit has its own s/no. ID label which defines the device's type, ID, service number ( S/No. ), and
channel. For any inquiry please advise your supplier the S/NO. for a faster service.
4.2 INDICATOR:
TX*: transmitter

Mini
4.3 INSTALLATION NOTES:
( 1 ) Ensure the original wired control of equipment
works.
( 2 ) Shut down equipment main power source before
installation.
( 3 ) Mount in a firmed site where the receiver
can be seen easily by operator.
( ) Keep away the mounted site from motors
relays, cables, high voltage wiring and devices,
or the protrusion of building where crane
moves.
Select a firmed site without metal shield.
( 5 ) Ensure the wiring layout correctly and safely
( 6 ) Test each function to be sure each output has
the same function as wired control
( 7 ) Put the wired pendant if has in safe position
Dimension of receiver
(Box 1.1)
hole 8mm dia x
insert rubber absorber in position screwing in until rubber
absorber inflated
4.4 INSTALLATION :RECEIVER ILLUSTRATION
5

Mini
If power ( green)
LED is on
RX works after
re-power
Data LED
RED slowly
( 1 time/sec. )
when TX is pressed
blinking
check ID switches
TX/ RX corresponds
If output cable is
short
re-new fuse renew cable
Power LED is
GREEN after start-up ??
Y*
LED NOT light or
LED light
If working after
renew batteries?
Please make sure the following status before trouble shooting.
( 1 ) The hoist or device is subject to control works
( 2 ) The TX outlook is in good condition without leakage
( 3 ) Receiver works
N*
N
TX faulty
call service
If data is blinking
fast when TX is pressed?
power off, and check if
TX works after re-power
If data LED works
If only working in
short distance
If antenna of RX/TX
is in bad shape or
broken
N
N
Y
Y
Y
6. TROUB E SHOOTING- RX
Please make sure the following status before trouble shooting.
( 1 ) The hoist or device is subject to control works
( 2 ) The RX outlook is in good condition without leakage
( 3 ) Transmitter works
If LED OP in
GREEN when
TX is pressed ?
If fuse is burned
If cable is faulty
( open or short )
If check crane
control panel or
call service
Data RED blinking
fast ( 3 times/sec. )
when TX is pressed
receiver faulty
call service
receiver faulty
call service
receiver faulty
call service
Y
N
N
N
N N
N
N
N
N
N
Y
Y
Y
Y
5. TROUB E SHOOTING- TX
RX*: receiver
N
6
TX*: transmitter

SPARE PARTS
TRANSMITTER
part n mber description
MTC
trasmitter casing (incl. RED stop,
rubber pushbuttons,battery case )
P01-M Transmitter protection sleeve
BOX1.1 receiver housing incl. cable gland
MDD-20-A decoder board ( Mini 20 )
CAP16 cable 16 X 0.75mm2 x 1.8 M
MED-20
encoder board( Mini 20 )
encoder board( Mini 0 )
MDD- 0-A decoder board ( Mini 0 )
MSB
Nylon belt for transmitter
7. PARTS IST
part n mber description part n mber descriptionpart n mber description
RECEIVER
8. WIRING DIAGRAM
Mini
RFP
HF receiver frequency board
MED-30
encoder board( Mini 30 )
MED- 0
MDD-30-A decoder board ( Mini 30 )
7

Standard circuit illustration.
Ensure your safety is our responsibility, use the remote control with the value is more than its worth is your right.
Mini
Mini
APOLLO mini 20C
APOLLO mini 30C
APOLLO mini 0C
APOLLO mini 60C
8