Aprilaire S84N 1H1C User manual

READ AND SAVE THESE INSTRUCTIONS
Thermostats
OWNER’S MANUAL
Model S84N 1H1C
Conventional 1 Heat / 1 Cool Thermostat
Model S84N SU
Single Stage Universal Thermostat
70
72
HEATING

TABLE OF CONTENTS
ABOUT YOUR NEW THERMOSTAT. . . . . . . . . . . . . . . 3
Thermostat Features . . . . . . . . . . . . . . . . . . . . . . . 3
QUICK REFERENCE TO CONTROLS & DISPLAY. . 4
Home Screen . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4
Main Menu . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5
Screen Saver. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6
POWER OPTIONS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7
OPERATION . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8
Select System Mode
(Em Heat / Heat / Cool / Auto / Off) . . . . . . . 8
Change Temperature Setting. . . . . . . . . . . . . . 9
Select Fan Setting (Auto / On / Circulate). . 10
Maintenance Reminders . . . . . . . . . . . . . . . . . . . 11
INDOOR AIR QUALITY FUNCTIONS . . . . . . . . . . . . 12
Event-Based™ Air Cleaning . . . . . . . . . . . . . . . 12
PROGRAM SCHEDULE AND HOLDS . . . . . . . . . . . . 14
Set Time and Date. . . . . . . . . . . . . . . . . . . . . . . . . 14
Understanding Program Schedules . . . . . . 14
Progressive Recovery. . . . . . . . . . . . . . . . . . . . . . 15
How to Modify Program Schedules . . . . . . . 16
Heat Blast® . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 18
Program Schedule Holds. . . . . . . . . . . . . . . . . . 18
Temporary Hold . . . . . . . . . . . . . . . . . . . . . . . . 18
SETUP MENU . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 19
User System Settings Table . . . . . . . . . . . . . . . 19
LIMITED WARRANTY . . . . . . . . . . . . . . . . . . . . . . . . . . .20
ABOUT YOUR NEW THERMOSTAT
THERMOSTAT FEATURES
• Heat Blast® raises the room temperature 3°F to 5°F.
• Easy to read, color display.
• 7 day programmability.
• Displays room temperature and temperature setting.
• Air lter and HVAC service reminders.
• Programmable fan control with fan circulation mode.
• Easy to use temperature control can override program schedule at any time.
• Progressive recovery ensures proper temperature at the start of a program event.
32

70
72
HEATING
HOLD 5:00
PM
QUICK REFERENCE TO CONTROLS & DISPLAY
HOME SCREEN
UP ARROW
BACK
EQUIPMENT
STATUS
SELECT (OPENS
MENU FROM
HOME SCREEN)
ROOM
TEMPERATURE
DOWN ARROW
ROOM
TEMPERATURE
SETTING
EVENT
STATUS
Mode
Fan
Schedule
Hold
Heat Blast
Main Menu
MAIN MENU
Main Menu
Mode
Fan
Schedule
Hold
Heat Blast
Air Cleaning
Settings
Item availability based
on installed options.
54

POWER OPTIONS
The thermostat is dual power. It can either use 24 VAC, 2 “AA” batteries or both (to provide
backup power for the clock). Batteries are optional if the thermostat was connected to AC power
when installed. For model S84N SU, 24 VAC must be connected in order for the system fault to
operate. The thermostat has a memory backup that saves the thermostat’s settings in case of a
power interruption.
70
11:11 AM
84°
Outside
SCREEN SAVER
Starts 45 seconds after inactivity, press any button to wake the screen. NOTE: Screen saver is not
available on thermostat installations that are not connected to C wire and run on battery power only.
CURRENT TIME
ROOM
TEMPERATURE
OUTDOOR
TEMPERATURE
(S84N SU ONLY
IF INSTALLED)
76

OPERATION
SELECT SYSTEM MODE
(EM HEAT / HEAT / COOL / AUTO / OFF)
1. Press SELECT to enter Main Menu.
2. Use or to select the Mode option.
3. Press SELECT to enter Mode menu:
4. Use or to select the desired mode.
Heat: Thermostat controls only the heating system.
Cool: Thermostat controls only the cooling system.
Auto: (if enabled in installer setup) Thermostat
automatically selects heating or cooling
depending on the indoor temperature.
Emergency Heat: (only for heat pumps with
auxiliary heat) Thermostat controls auxiliary heat.
Heat pump will not operate in Em Heat mode.
Off: Heating and cooling systems are off.
5. Press SELECT to save the mode and return to the
home screen, or BACK to exit without saving.
CHANGE TEMPERATURE SETTING
1. From the Home screen press or to
adjust the current temperature setting.
2. The temperature setting will enlarge during
adjustment.
3. The temperature setting will take effect 3
seconds after the last adjustment or press
SELECT to save and return to the home screen.
See HOW TO MODIFY PROGRAM SCHEDULES on
pages 16-17 for more information.
Mode
Fan
Schedule
Hold
Heat Blast
Main Menu
Heat
Cool
Auto
Em Heat
Off
Mode
70
72
HEATING
SET TEMP
72
70
98
2
4
4
1
3
5
3
1
2
3

SELECT FAN SETTING (AUTO / ON / CIRCULATE)
When the fan mode is changed during a program
event, it remains in that mode until the next event
starts. The fan must be programmed to Fan On
in the schedule to run continuously through all
events.
1. Press SELECT to enter Main Menu.
2. Use or to select the Fan option.
3. Press SELECT to enter Fan menu:
4. Use or to select the desired fan mode.
On: Fan runs continuously. Use this mode for
maximum air circulation/ltering.
Auto: Fan runs only when the heating or cooling
system is on.
Circulate: Same as Auto, but ensures the fan
is on for at least 30 minutes per hour. Use this
mode for a balance of energy savings and air
circulation/cleaning.
5. Press SELECT to save the fan mode and return to
the home screen, or BACK to exit without saving.
MAINTENANCE REMINDERS
Maintenance reminders are set up by the installer to indicate when the equipment is due for
service. If a maintenance reminder is displayed, call your HVAC dealer for service. They can be
reset by selecting the Reset option on the reminder message or in the Reset Service Reminders
option found in the Settings menu.
Mode
Fan
Schedule
Hold
Heat Blast
Main Menu
On
Auto
Circulate
Fan
1110
2
4
1
3
3
5
4

INDOOR AIR QUALITY FUNCTIONS
EVENT-BASED™ AIR CLEANING (IF INSTALLED)
1. Select Air Cleaning from the Main Menu. Air
Cleaning has two temporary events and three
persistent modes that can be set. Air cleaning will
activate the fan for the purpose of air cleaning.
2. Events (temporary)
3 Hrs: When selected, the air cleaner will run
for 3 hours continuously and then return to the
most recent mode of Auto, Continuous, or Off.
This option only cleans the air when needed; an
example would be after vacuuming.
24 Hrs: When seasonal allergies spike and outside
air quality is at its worst, choose this option. Your
air cleaner will run continuously for 24 hours,
then return to the most recent mode of Auto,
Continuous, or Off.
NOTE:The thermostat will manage fan and air
cleaning selections when the selections overlap.
3. Modes (persistent)
Auto: The air cleaner will run a minimum of 30
minutes every hour. The air cleaner will monitor
the amount of time your heating and cooling
system runs; if 30 minutes is not reached the
air cleaner will automatically turn on. This will
maximize the amount of air cleaning while
minimizing energy consumption.
Continuous: This option will provide the
maximum amount of air cleaning available.
The air cleaner will be active for 24 hours a day,
seven days a week.
Off: The air cleaner will not run the fan for the
sole purpose of air cleaning.
NOTE:If air cleaning is installed, air cleaning will
still occur during normal fan operation during
heating, cooling or other indoor air quality events.
Schedule
Air Cleaning
Settings
Main Menu
Hold
Heat Blast
3 Hrs
24 Hrs
Mode
Air Cleaning
3 Hrs
24 Hrs
Mode
Air Cleaning
Auto
Continuous
Off
Mode
1312
2
1
3
3

PROGRAM SCHEDULE AND HOLDS
SET TIME AND DATE
1. Select Settings from the Main Menu.
2. From the Settings menu, select Clock the
to set the time, or Date to set the date.
The times and temperatures shown in TABLE 1 are the defaults. The start time and temperature
of each section can be changed to t your schedule. We recommend these settings, since they
can reduce your heating/cooling expenses. The fan program is pre-set to Auto for all events.
TABLE 1 – DEFAULT SCHEDULE
Event Designator Start Time
Set Temperature
FanHeat Cool
Wake 6:00 AM 70°F (21°C) 78°F (25.5°C) Auto
Leave 8:00 AM 62°F (16.5°C) 85°F (29.5°C) Auto
Return 5:00 PM 70°F (21°C) 78°F (25.5°C) Auto
Sleep 10:00 PM 62°F (16.5°C) 82°F (27.5°C) Auto
PROGRESSIVE RECOVERY
The Progressive Recovery feature allows Pre-Heating or Pre-Cooling PRIOR to a scheduled
event in order to reach the desired temperature at the start of that scheduled event. Example:
According to TABLE 1, the Wake time is 6:00 am, the Wake heat set point is 70°F and the Sleep set
point is 62°F. The heat will turn on prior to 6:00 am so that the temperature reaches 70°F by the
time the Wake event begins.
UNDERSTANDING PROGRAM SCHEDULES
The daily schedule is split into four sections:
Wake: Temperature you would prefer to
wake up to.
Leave: Temperature when you are away
from the house.
Return: Temperature you would prefer to
return home to.
Sleep: Temperature you would prefer
while sleeping.
Schedule
Air Cleaning
Settings
Main Menu
Hold
Heat Blast
Clock
Date
Display
Scale
Installer
Settings
1514
2
1

HOW TO MODIFY PROGRAM SCHEDULES
1. From the Schedule option in the
Main Menu, you can turn the
schedule On or Off, and make
changes to the schedule.
Modify: The event start time,
temperature, and fan mode can
be adjusted for each event of
each day.
On/Off: When the Schedule
is turned Off the thermostat
will continue to control at the
current temperature setting
until adjusted with and .
2. Select Modify to change
default schedule settings.
3. Select the group of days or day
you would like to modify.
4. Adjust Wake details (Start,
Heat, Cool, Fan, and/or select
Next to proceed.
Mode
Fan
Schedule
Hold
Heat Blast
Main Menu
5. Adjust Leave details and/or
select Next to proceed.
6. Adjust Return details and/or
select Next to proceed.
7. Adjust Sleep details and/or
select Next to proceed.
8. a) If you modied a group of
days you can Save & Exit back
to the Home screen.
b) Or if you modied a single
day you can copy the settings
to another day or group of days.
9. If you choose to copy, you will
see this conrmation message,
then you can return to the
Modify menu to make changes
to another day by selecting
Edit More Days or return to the
Home screen by selecting Save
and Exit.
Confirm
Schedule
Change
Cancel
Save & Exit
All Days
Monday
Tuesday
Weekdays
Weekends
Copy Day To...
Save and Exit
Edit More Days
Copied to
All Days
Next
Cool
70°
Fan
Auto
Start
6:00a
Heat
70°
Wake
All Days
Monday
Tuesday
Weekdays
Weekends
Modify Day
Modify
On
Schedule
Next
Cool
70°
Fan
Auto
Start
8:00a
Heat
70°
Leave
Next
Cool
70°
Fan
Auto
Start
5:00p
Heat
70°
Return
Next
Cool
70°
Fan
Auto
Start
12:00p
Heat
70°
Sleep
1716
1
8a
8b
9
4
3
2
5
6
7

HEAT BLAST® (IF INSTALLED)
Heat Blast® will raise the current room temperature 3°F to 5°F based on the installer set-up, and
then resume normal operation.
To activate Heat Blast, select Heat Blast from the Menu, and use the Select button to set the
toggle to ON.
NOTE:Heat Blast button is only available if it is enabled in the Installer Setup and the thermostat
is in Heat or Emergency Heat mode.
To cancel Heat Blast, select Heat Blast from the Menu, and use the Select button to set the
toggle to OFF.
PROGRAM SCHEDULE HOLDS
TEMPORARY HOLD
Press or to immediately adjust the temperature when the
schedule is running. This will temporarily hold the temperature setting
until the next scheduled event.
A temporary hold can also be set from the Hold option in the Menu.
The end time of the hold can also be adjusted from here.
The temporary hold can be canceled from the Hold option in the Menu,
or by adjusting the temperature back to the scheduled temperature.
SETUP MENU
TABLE 2 – USER SYSTEM SETTINGS TABLE
Clock Set time.
Date Set date.
Display Display can be disabled during sleep for light sensitive locations.
(Not available when battery only powered.)
Scale Change temperature scale from Fahrenheit to Celsius.
About Contains thermostat model number and software/hardware version.
Reset Reminder Reset expired service reminders.
70
72
HEATING
HOLD 5:00 PM
1918