Aqua Sound WSP50 User manual

WSP50 USER MANUAL FCC ID:
BT ID: B020705

FEATURES
CONTENTS
•Bluetooth Speaker
•USB Charging Cord
•Suction cup
•Instruction Manual
Enjoy music wirelessly
•Switch between calls and music - you will not miss the
incoming call whie listening to music
•Answer & end a call at click of a button.

Read this manual carefully before putting the appliance into operation and
keep this manual for future reference.
Do not insert any metal object into the device.
To avoid a static charge, do not use the device in an extremely dry climate.
Do not attempt to repair the device yourself.
SAFETY INSTRUCTIONS
•Volume Control
•Media Control (pause/play, previous track/next track)
•Connects to last connected device automatically
• IOS Battery display

PRODUCT OVERVIEW

1 Short Press: Previous Song Long Press: Volume Down
2 Short Press: PLay/Pause Long Press: Power On/Off
3 Mic
4 Short Press: Switch Mode Long Press: Refuse a call
5 Short Press: Next Song Long Press: Volume up
6 Reset Hole
7 Micro USB charging port

The Aqua Sound WSP50 Bluetooth speaker comes with a built
in rechargeable battery. Before using it for the rst time we
recommend you charge the battery fully.
1.Connect the USB cable to the USB port on the unit.
2.Connect the other end of the USB cable to a USB port on a PC
or an AC/DC adapter. The LED indicator turns on to indicate that
the battery is being charged. When the battery is fully charged,
the LED indicator will turn off

1.Turn off the speaker. Make sure the speaker is powered off
before continuing
2.Press and hold the Power ON/OFF button until the blue LED
light flashes - the Bluetooth speaker is ready for pairing.
3.Turn on your Bluetooth enabled device and activate the
Bluetooth function then put it in pairing mode
4.Search for the Bluetooth device - “AQUASOUND WSP50” will
show up.
PAIRING

5.Pair your Bluetooth enabled device with AQUASOUND
WSP50. If a password is needed, type in “0000”. After the
speaker is paired with your device, connect it.
Tips:
Once the speaker is paired and connected to your Bluetooth
device, it automatically connects the next time as long as the
Bluetooth setting on your device is turned on.

Answer a call: Press the Phone button.
End a call: Press the Phone button.
Reject a call: Press and hold the Phone button for around 2
seconds.
Redial the last number: Press the phone button twice quickly.
CONTROLLING CALLS

Bluetooth operating distance: 33 feet
Working time : Music time 3 hours, talk time 3 hours
Charging input power: DC 5V
Charging time: Approx 3 hours
IP grade: IPX7 (Waterproof)
BATTERY: LI-PO 500MA
SPECIFICATIONS
Playing Music: Once the device is connected choose the music le to
play. You can use the speaker to FWD & RWD to the next le.
CONTROLLING MUSIC

FLEXIBLE TAIL & SUCTION MOUNT
PLACE
LOOP
HOOK
MOUNT

FCC Caution: Anychangesormodificationsnotexpresslyapproved bythepartyresponsible
forcompliance couldvoidthe user'sauthorityto operate thisequipment.
Thisdevice complieswith Part 15 oftheFCC Rules.Operation issubject to the following two
conditions:(1)Thisdevice maynot cause harmfulinterference, and (2)thisdevicemust accept
anyinterference received, includinginterference that maycause undesired operation.
NOTE: Thisequipment hasbeen tested and found to complywith the limitsfora Class B
digitaldevice, pursuantto Part 15 oftheFCC Rules.
These limitsare designed to provide reasonableprotection against harmfulinterference in a
residentialinstallation. Thisequipment generates, usesand canradiateradio frequency
energyand, ifnot installed and used in accordancewith theinstructions, maycause harmful
interference to radio communications.
However, thereisno guarantee thatinterferencewillnot occurina particularinstallation.
Ifthisequipment doescauseharmfulinterferenceto radioortelevisionreception, whichcan be
determined byturning the equipment off and on, the userisencouraged totryto correct the
interferencebyoneormore ofthe followingmeasures:
FCC RFRadiationExposure Statement:
Thisequipment complieswith FCCradiation exposurelimitsset forth foran uncontrolled
environment End users must followthe specificoperating instructionsforsatisfying RF
exposure compliance. Thistransmittermust not be collocated oroperating in conjunctionwith
anyotherantenna ortransmitter.
The device hasbeen evaluated to meet generalRFexposure requirement. The device can be
used in portableexposureconditionwithout restriction.