Aqualine JALTA PB103 User manual

JALTA PB103
WC an S-tra /P-tra , cistern with flush mechanism
Installation manual
•Before you begin, carefully ins ect the new toilet for visible demage or manufacturing faults.
•Read the installation manual befor you roceed to installation.
Technical drawing
•Assemble the cistern to the an
[Zade
Possibility of changing to S-tra by adding WC flexible connection (not included)
Im ortant:
•Do not u e abra ive cleaner /material .
Warranty conditions:
Warranty doe not cover:
•Defect cau ed by the in tallation contrary to content of the manual.
•Damage cau ed a a re ult of modification and de ign change made by the u er or any third party.
•Mechanical damage .
•Valve malfunction due to pollution cau ed by chemical agent di pen ed into tank.

JALTA PB103
WC an S-tra /P-tra , cistern with flush mechanism
Installation of fill valve
1. Unscrew Hexagon nut and Nut collar from the Fill valve, insert Fill valve with Silicon
seal into the inlet hole of Water tank and make sure Fill valve is in the right position,
then screw Nut collar and Hexagon nut in turn to Fill valve tightly.Then connect
Refilling tube with the Overflow pipe of Flush valve.
2. After connecting Water supply pipe, adjust the fill volume by rotating Rod clockwise
or anticlockwise to make Small tank move up or down.
Installation of Flush Valve
1. Rotate the Body of Flush Valve anticlockwise and také it out from Base. Unscrew
Round nut and Nut collar in turn from Flush valve.
2. Incline Flush valve properly then insert it in the outleet hole of Water tank and make
sure Flush valve is in the right position. Then screw Nut collar and Round nut in turn
to Flush valve tightly. Check whether Silicon seal is tightly stuck on the bottom of
Water tank and the Base of fill valve is vertical.
3. Take the Body of Flush valve back to Base and rotate it clockwise. Knot Installation
washer to Round nut and put Tank on the right place of Bowl. Then insert Tank to
Bowl bolt with Bolt silicon seal in the bolt hole (as picture) and screw Eight-square
Nut to Tank to Bowl Bolt tightly.
Adjust the partial flush volume by moving Partial flush cup up or down.