Aquatic SWA6+ Guide

PLEASE READ THIS INSTRUCTION MANUAL BEFORE
INSTALLATION AND OPERATION
USER / INSTALLATION MANUAL
SWA6+
COMBINED BLUETOOTH STEREO SUBWOOFER
with Full Range Speaker Outputs
CHARGING
RADIO
FM
RADIO
FM
DSP EQ
DSP EQ

1 Getting Started....................................................................................................................
1.1 Contents........................................................................................................................
1.2 Features.........................................................................................................................
1.3 Connections...................................................................................................................
1.4 12-pin Harness Connection...........................................................................................
1.5 Bluetooth Halo Aerial Technology Antenna.....................................................................
1.6 Power Attenuation Wires.................................................................................................
1.7 Power On........................................................................................................................
1.8 Handheld Remote Control Charging...............................................................................
1.9 Handheld Remote Control Synchronizing........................................................................
2 Remote Control Functions...................................................................................................
2.1 RF6 Wireless Handheld Remote Control.........................................................................
3 Listening to Devices............................................................................................................
3.1 Listening via USB..........................................................................................................
3.1.1 Listening via USB...................................................................................................
3.1.2 Navi Search.............................................................................................................
3.1.3 Random Playing......................................................................................................
3.1.4 Device Charging.....................................................................................................
3.2 Listening via Bluetooth Audio........................................................................................
3.2.1 Pair with Bluetooth Audio Device............................................................................
3.2.2 Listening via Bluetooth Audio Device......................................................................
3.2.3 Bluetooth Multi-link................................................................................................
3.3 Listening via Auxiliary Input...........................................................................................
3.4 Adjust Volume Level.......................................................................................................
3.5 Automatic Standby Mode...............................................................................................
4 Listening to FM Radio...........................................................................................................
4.1 Enter FM Radio Mode.....................................................................................................
4.2 Scan or Seek FM Radio Channels...................................................................................
4.3 Saving Radio Channel to Memory...................................................................................
4.4 Listening to Saved Radio Memory...................................................................................
4.5 Adjust Volume Level.......................................................................................................
5 Additional Features.............................................................................................................
5.1 Audio Menu....................................................................................................................
5.2 Virtual Bass (VBass)......................................................................................................
5.3 External 12V Triggers.....................................................................................................
5.4 Bluetooth Halo Aerial Technology..............................................................................................
5.5 Connecting Multiple Amplifiers or High Current Draw Lighting Systems........................
6 Specifications & Dimensions...............................................................................................
6.1 Specifications................................................................................................................
6.2 Dimensions....................................................................................................................
7 Warranty Information..........................................................................................................
3
3
3
4
5
6
7
7
8
8
9
9
10
10
10
10
10
10
10
10
11
11
11
11
11
12
12
12
12
12
12
13
13
13
13
13
14
15
15
15
16
Table of Contents Combined Stereo Subwoofer SWA6+
2www.aquaticav.com

1.1 Contents
• SWA6+ Combined Stereo Subwoofer
• 2-Way RF Waterproof Remote Control (RF6)
• USB Charging Cable (RF6 Charging Cable)
• Wiring Harness (AQ-UNH-2)*
• User/Installation Manual
• Bluetooth Halo Aerial Technology Antenna (AQ-BTANT-1)
*Retail packaged models only.
Congratulations on the purchase of the SWA6+ Combined Stereo Subwoofer with Bluetooth and
USB connectivity and two full range speaker outputs. With the right care and attention it will give
you many years of trouble free operation.
Before operating the system, please read this manual fully to obtain the best results from your
new product, and retain it for future reference.
The SWA6+ Combined Bluetooth Stereo Subwoofer System is a high quality, robust and durable
combined subwoofer and stereo, with built-in amplifier and outputs for connection of standard
full range speakers.
Built-in electronic cross-over automatically balances the full range speaker outputs with the tuned
subwoofer for optimum performance
Halo Aerial Technology provides unrivalled Bluetooth range and signal strength.
Automatic Standby mode will engage when the SWA6+ does not see any input from either the
RCA’s or Bluetooth.
USB connection allows connection of USB thumb drives with supported audio media and will
charge USB devices such as smartphones.
Rated at 288W max power output: 144W for the sub and 72W x 2 to the full range speakers (at 2
Ohms) with a frequency response of 26Hz-125Hz for the sub frequencies and 125-20Hz for the
full range frequencies.
The amplifier is both 2 Ohm and 4 Ohm stable, so a maximum of four 4 Ohm speakers can be
connected.
The SWA6+ active subwoofer features a Tuned Port for enhanced bass response and 8” DVC (Dual
Voice Coil) speaker to deliver powerful, warm bass to your existing speaker setup, adding musical-
ity and depth to your favourite audio content.
Designed and built to withstand the harsh IPX4 conditions associated with use in marine, boat,
pool or spa applications the cabinet has been treated to an IPX4 rating and the PCB is conformal
coated.
1.2 Features
Getting Started Combined Stereo Subwoofer SWA6+
3www.aquaticav.com

1.3 Connections
1. 12-pin Watertight Harness*
The 12-pin harness supplies power and ground connections to the SWA6+ and four (4)
speaker channel output connections from the SWA6+ (see Connections Diagram 1.3.1).
Do not cut or modify the 12-pin harness* on the SWA6+ side or warranty will be void.
2. FM Radio Antenna Jack
Allows connection of FM radio antenna. For best FM performance make sure the antenna is
extended to the highest achievable position.
3. Auxiliary Outputs
Allows external amplifiers to be connected to power additional speakers.
4. Auxiliary Inputs
Allows an additional RCA input from a standalone unit or another stereo source.
5. 12V DC External Triggers (x2)
Allows for external lighting or relays to be triggered (3A max load).
6. USB Input
For connection of USB thumb drives with MP3 and/or WMA files. Charges compatible USB
devices when connected via USB cable.
7. Wired Remote 8-pin DIN Cable
Allows connection of a Wired Remote Control (WR6 sold separately).
8. Bluetooth Halo Aerial Connector
Connect the Bluetooth Halo Aerial Technology Antenna (AQ-BTANT-1) to the male SMA
connector. Do not apply excessive torque on the SMA connector (no more than 0.5N-m). Use
hands to tighten the connection (do not use a wrench). See section 1.5.
9. Power Attenuation Wires
Allows the output level to be adjusted from a factory preset of -3dB to either -6dB, 0dB or
+6dB. See section 1.6 for further details.
Aquatic AV does not recommend the wired remote control WR6 for use in spa applications.
*Retail packaged models only.
Getting Started Combined Stereo Subwoofer SWA6+
4www.aquaticav.com

If your SWA6+ was purchased from an Aquatic AV dealer and/or supplied with retail packaging it
is supplied with the Aquatic AV universal harness AQ-UNH-2 in order to connect the power and
speakers. Please proceed to section 1.4.1.
If your SWA6+ was supplied as a pre-installed waterproof entertainment system it will utilise 3rd
party wiring connections and is not supplied with the Aquatic AV 12-pin Harness. Please proceed
to section 1.5
1.4 12-pin Harness Connection (retail packaged models only)
1.4.1 12-pin Harness Wiring Diagram
1.3.1 Connections Diagram
All open wire connections should be soldered and protected against water and dust for best long-term performance.
*Retail packaged models only.
2. FM Radio Antenna Jack
1. 12-pin Watertight Harness*
3. RCA Auxiliary Outputs (Red & White)
4. RCA Auxiliary Inputs (Red & White)
5. 12V DC Triggers (Brown)
6. USB Input Connector
7. Wired Remote 8-pin DIN Connector
(Remote sold separately)
10. Power Attenuation Wires
(1x white, 1x black)
Power On LED (Green)
8. Bluetooth Halo Aerial
Technology Connector
No lower than a 2 Ohm load should be used
or damage may occur to the Digital Media
Locker.
Make sure the polarity of speakers are
connected correctly.
Power Antenna (7)
Fuse Box
No lower than a 4 Ohm speaker should be
used or damage may occur to the SWA6+.
Make sure the polarity of speakers are
connected correctly.
(White/strip)
Left Speaker 2
Right Speaker 1
Right Speaker 2
OPTIONAL
OPTIONAL
Left Speaker 1
Getting Started Combined Stereo Subwoofer SWA6+
5www.aquaticav.com

The Bluetooth Halo Aerial Technology antenna AQ-BTANT-1 (included) improves the standard
Bluetooth wireless signal and range, for a stronger signal and increased range.
Please read the precautions and installation instructions below before installing the AQ-
BTANT-1 Bluetooth Antenna.
1.5 Bluetooth Halo Aerial Technology Antenna
Connect the Bluetooth Halo Aerial Technology Antenna (AQ-BTANT-1) to the male SMA
connector. Do not apply excessive torque on the SMA connector (no more than 0.5N-m). Use
hands to tighten the connection (do not use a wrench).
To ensure that the range is maximized, make sure the arrow is pointing directly upwards
towards the sky when the antenna is mounted.
If there is excess antenna cable length make sure this is coiled and not bent as bending may
cause damage to the cable.
For spa or hot tub installation the antenna should be located above the waterline otherwise
Bluetooth range will be drastically reduced.
1.5.1 Bluetooth Halo Aerial Technology Precautions
1.5.2 Bluetooth Halo Aerial Technology Installation
1. Connect the Bluetooth Antenna’s cable to
the Halo Aerial Technology connector on the
control panel, ensuring it is fully secure by
turning clockwise until it is finger tight.
2. Make sure the arrow is pointing directly
upwards towards the sky when the antenna
is mounted to ensure the Bluetooth range is
maximized.
3. Screw on the provided Bluetooth Antenna,
avoiding bending the cable at more than a 60°
angle.
If there is no suitable surface to screw in to,
we recommend using a good quality double
sided tape.
Getting Started Combined Stereo Subwoofer SWA6+
6www.aquaticav.com

The SWA6+ requires +12V DC to both the red and yellow wires. When both of these wires have
power the SWA6+ is always powered on, and the green Power On LED will remain illuminated.
Ground is connected to the black wire.
In a spa application this requires the red and yellow wires to be jumped together and then
connected to the +12VDC output of the power source. In this set up the SWA6+ will always be
on, with a very low current draw when idle.
In a boat, ATV or other application requiring power from a battery, the yellow wire (constant
power) should be connected to the battery, and the red wire should be connected to the ignition
or a switch.
For detailed instructions you can check out our online video:
‘How to wire your Aquatic AV stereo system’
http://www.aquaticav.com/support/videos
1.7 Power On
1.6 Power Attenuation Wires
The SWA6+ Combined Stereo Subwoofer’s
power can be reduced or increased to suit
different applications. An output level
of -3dB or -6dB should be used to avoid
blowing very small speakers, often used in
spa applications.
By cutting only the white wire the output level will decrease to -6dB below the nominal 0dB.
By cutting both the white and black wires the power/volume will increase to +6dB above the
nominal 0dB.
By cutting only the black wire the power/volume will increase from -3dB to the nominal 0dB.
These modifications should only be carried out by an experienced audio installer.
Black Wire White Wire Output Level
Intact (not cut) Intact (not cut) -3dB
Intact (not cut) Cut -6dB
Cut Intact (not cut) 0dB (reference)
Cut Cut +6dB
Should you cut the wrong wires or wish to reconnect them to further alter the attenuation, the Power Attenuation
Wires can be crimped back together.
Getting Started Combined Stereo Subwoofer SWA6+
7www.aquaticav.com

The remote has a built-in Polymer Lithium rechargeable battery and comes with a charging cable.
Connect one end of the charging cable to the charging connection on the remote control and con-
nect the USB end of the charging cable to any USB charger (5V DC) for charging.
Make sure the remote has been charged before used.
1.8 Handheld Remote Control Charging
If the pairing process is not successful, try again to put your remote close to the remote receiver or charge the remote
control if the battery is low.
Depending on the frequency of usage, the remote may drain its battery. Please charge the remote before use. If the LCD
shows nothing, the battery has been drained and will need charging.
If you have lost or damaged your remote control and buy a new remote control, follow the above steps to pair the
new remote control.
1.9 Handheld Remote Control Synchronizing
1. Make sure SWA6+ is powered ON (green LED)
2. Put the remote within 0.5 meter of the SWA6+.
3. Press and hold MODE on remote control until the LCD shows “Pairing in Progress”.
Release the button.
4. Within 2 seconds, the LCD will show “Paired”. If it fails to pair, the LCD will show
“Pairing Failed”. If this happens, wait 5 seconds and repeat steps above.
The remote should already be paired from the factory, but if you need to synchronize the remote,
follow the steps below.
For any additional remote controls, you will also need to synchronize those remote controls to the
SWA6+.
Getting Started Combined Stereo Subwoofer SWA6+
8www.aquaticav.com

2.1 RF6 Wireless Handheld Remote Control
USB
Save & Exit Audio Menu
Next Folder
Random Playback
Previous Folder
Remote Control Functions Combined Stereo Subwoofer SWA6+
9www.aquaticav.com

1. Switch on your Bluetooth Audio device.
2. Select ‘AQUATIC AV SW620’ from the list of available devices to pair (no password is
needed).
3.2.1 Pair with Bluetooth Audio Device
3.2 Listening via Bluetooth Audio
3.1 Listening via USB
3.1.4 Device Charging
When specified USB devices, such as Smartphones or MP3 players, are connected with a stand-
ard male-to-female USB cable, the device’s battery will charge automatically. The USB socket can
deliver 1A of current to charge a device battery.
1. Attach your USB thumb drive to the female USB socket of the SWA6+
2. Press MODE on the remote to select USB mode.
3. Press PLAY to play or pause the music.
4. Press FAST REWIND / FAST FORWARD once play previous / next song file.
5. Press and hold FAST REWIND / FAST FORWARD to fast forward / fast rewind the song file.
3.1.1 Listening via USB
Playback and navigation of music files via USB includes MP3 and WMA files.
3.1.2 Navi Search
1. Press 1 once to go to the next folder.
2. Press 3 once to go to the previous folder.
3.1.3 Random Playing
Press and hold 2 will toggle Random Play in USB mode.
You can navigate folders in the USB thumb drive.
Listening to Devices Combined Stereo Subwoofer SWA6+
10www.aquaticav.com

3.4 Adjust Volume Level
1. Press VOLUME UP once to increase the volume.
2. Press VOLUME DOWN once to reduce the volume.
3. Press and hold either VOLUME UP or VOLUME DOWN to increase or decrease audio
volume continuously.
3.2.2 Listening via Bluetooth Audio Device
1. Bluetooth Audio mode will be activated once a Bluetooth Audio device is paired in any
mode. Use MODE to change to the Bluetooth Audio mode to listen to music.
2. Play the song from device and the sound will play through the SWA6+.
3. Press PLAY/PAUSE to play/pause the song.
4. Press FAST REWIND/FORWARD buttons to play previous/next song file.
4. Press and hold FAST REWIND/FORWARD buttons to fast forward / fast rewind the song
file.
5. Previous/next track and volume up/down can be controlled directly from your Bluetooth
Audio device or directly from the SWA6+ remote control.
3.2.3 Bluetooth Multi-link
A second Bluetooth Audio device can pair to the SWA6+ even when music is playing from the first
Bluetooth Audio device.
Once paired, playing music from device 2 will override device 1 and the SWA6+ will begin playing
music from device 2.
Should you wish to play music from device 1 again, wait 10 seconds and press play on device 1.
This process can be repeated between device 1 and device 2 indefinitely while both devices are
paired.
3.5 Automatic Standby Mode
Automatic Standby mode will engage when the SWA6+ does not see any input from either the
RCA’s or Bluetooth.
Once a signal is detected the unit will switch on again.
3.3 Listening via Auxiliary Input
1.Connect your MP3 device to the stereo RCA inputs.
2. Press MODE on the remote control to select ‘AUX’ mode.
If using a single RCA ‘sub’ output then an RCA Y adaptor must be used to provide input to both red and white
RCA inputs on the subwoofer.
Connecting and playing device via Bluetooth will overide Auxiliary mode.
Listening to Devices Combined Stereo Subwoofer SWA6+
11www.aquaticav.com

4.5 Adjust Volume Level
1. Press VOLUME UP once to increase the volume.
2. Press VOLUME DOWN once to reduce the volume.
3. Press and hold either VOLUME UP or VOLUME DOWN to increase or decrease audio
volume continuously.
4.2 Scan or Seek FM Radio Channels
1. Press FAST REWIND/FAST FORWARD to seek another station.
2. Press once FAST REWIND/FAST FORWARD to -0.05kHz or +0.05kHz to the frequency.
4.3 Saving Radio Channel to Memory
To save the current frequency to memory, press and hold 1, 2 or 3 for more than 2 seconds. The
station will be stored into relevant button.
4.4 Listening to Saved Radio Memory
Press the 1, 2, or 3 preset button once to listen to the station stored in that button.
4.1 Enter FM Radio Mode
1. Press MODE on the remote control to switch to FM radio mode.
2. Press PLAY/PAUSE to mute or unmute the audio.
If this is the first time you listen to FM radio, the default frequency will be 87.5MHz, as shown on the remote
LCD.
FM radio is only available when you are in FM Radio mode.
Listening to FM Radio Combined Stereo Subwoofer SWA6+
12www.aquaticav.com

5.1 Audio Menu
The SWA6+ is equipped with an audio DSP (Digital Signal Processor) to provide preset listening
experiences for different music types.
1. To enter audio menu, press once AUDIO
button on the remote control.
2. Each press of AUDIO button will advance
to the next audio setting as described on
the right.
3. In the audio menu, press and hold
AUDIO to save and exit the audio menu
back to the original mode.
5.2 Virtual Bass (VBass)
Virtual Bass (VBass) boosts the bass of the audio signal using the latest DSP technology and is
particularly useful when used with very small speakers to create perceived bass frequencies of a
much larger speaker.
Press VBASS once on the remote control to toggle it ON or OFF.
If you have chosen preset equalizer (Rock, Classic,
or Pop), the previous Bass & Treble settings will be
overridden.
The SWA6+ includes two independent 12V ‘accessory’ triggers, activated from the remote control.
These could activate any 12V based device like 12V lights or 12V motors.
In any operational mode, press the 12V TRIGGER button on the remote control to activate. Press
again to deactivate.
If using two external trigger wires you can also activate the second external trigger by pressing
and holding the 12V TRIGGER button to activate. Press and hold again to deactivate.
5.3 External 12V Triggers
Load on External Trigger should not exceed 3A.
Aquatic AV strongly recommend you speak to our technical service staff or your local Aquatic AV dealer if you are
considering using this feature.
5.4 Bluetooth Halo Aerial Technology
The Bluetooth Halo Aerial Technology antenna AQ-BTANT-1 (included) improves the standard
Bluetooth wireless signal and range, for a stronger signal and increased range.
Additional Features Combined Stereo Subwoofer SWA6+
13www.aquaticav.com

Wiring a Single Pull Single Throw (SPST) Relay
The SPST is necessary to protect the stereo in systems
with multiple amplifiers. The SWA6+ remote and trigger
wire provide 2A max current. While this enough to
power a single amplifier, complex systems with multiple
amplifiers will require a SPST relay.
Position 30: requires 12VDC from the main power
source (12V battery, power supply etc). This should be
the same power source that is powering your stereo.
Position 85: this is where you connect your ground from
your power source (12V battery, power supply, etc.) This
should be the same ground reference as your stereo.
Position 86: position 86 is triggered 12V, and is sent when your stereo is powered on.
For Aquatic AV stereos position 86 can be connected to either the blue remote wire in the harness
or the brown 12V trigger on the rear of the unit. The differences are below:
Blue (recommended): The blue (remote wire) provides a 12VDC output when the stereo is
powered on. Meaning as soon as the stereo is powered on the blue wire sends 12VDC through
the relay powering on the amplifier.
Brown: the brown (12V Trigger) provides 12VDC output when it is triggered via the lightning
bolt icon on the faceplate or handheld remote. This setup is more advantageous is a more
complex system with several zones, as it gives you control of when an amp is on or off.
Position 87: this is the 12VDC output that you will provide 12VDC to the remote turn on to the
amplifiers in your system.
5.5 Connecting Multiple Amplifiers or High Current Draw Lighting Systems
87
87
85
30
86
Triggered
12V DC from
stereo (Blue or
Brown wire)
Main 12V DC
input (fused)
Common
Ground
12V DC output for amplifier
Additional Features Combined Stereo Subwoofer SWA6+
14www.aquaticav.com

6.2 Dimensions
Media
Supported Media....................................
Device Charging.....................................
Device Control.......................................
Remote Charging....................................
Inputs
Auxiliary................................................
USB......................................................
Outputs
Pre-Out..................................................
12V Trigger............................................
Power
Output Voltage @ 2 Ohm.........................
Output Voltage @ 4 Ohm.........................
Operation Voltage...................................
Max Current Draw...................................
Standby Current Draw.............................
Multi-Environment Certifications
Waterproof.............................................
Conformal PCB Coating...........................
UV Protection.........................................
Salt/Fog Protection.................................
Stainless Steel Mountings.......................
Bluetooth Audio / USB / MP3 / FM / AUX
via USB
Handheld RF Remote Control (included)
Wired Remote Control (WR6 sold separately)
via cable
1x stereo pair RCA
1x USB
1x stereo pair RCA (4V)
2x 12V DC Triggers (3A)
4x 72W
4x 45W
9.6V - 14.4V DC
7A
6mA
IPx4
Yes
500 hours stable, ASTM D4329 compliant
500 hours stable, ASTM B117 compliant
Yes
6.1 Specifications
279.4mm
368.3mm
80.4mm 225.3mm 43.4mm
112.9mm 132.9mm
231.4mm
368.3mm
144.2mm
Specifications & Dimensions Combined Stereo Subwoofer SWA6+
15www.aquaticav.com

Aquatic AV offers a limited warranty of our products on the following terms:
Length of warranty
2 years on audio systems, electronics, speakers, and accessories (receipt required).
Coverage
This warranty covers only the original purchaser of an Aquatic AV product purchased from an
authorized Aquatic AV dealer. In order to receive service, the purchaser must provide Aquatic AV
with a copy of the receipt stating the customer name, dealer name, product purchased and date
of purchase.
Defective products
Products found to be defective during the warranty period will be repaired or replaced (with a
product deemed to be equivalent) at Aquatic AV’s discretion.
What is not covered
Damage caused by accident, abuse, improper operations or theft. Any cost or expense related to
the removal or reinstallation of product. Service performed by anyone other than an authorized
Aquatic AV service center. Any product with the serial number or tamper labels defaced, altered,
or removed. Subsequent damage to other components. Any product not purchased from an
authorized Aquatic AV dealer.
Limit on implied warranties
Any implied warranties including warranties of fitness for use and merchantability are limited
in duration to the period of the express warranty set forth above. Some states do not allow
limitations on the length of an implied warranty, so this limitation may not apply. No person is
authorized to assume for Aquatic AV any other liability in connection with the sale of the product.
How to obtain service
You must obtain a return material authorization number (RMA) to return any product to Aquatic
AV. You are responsible for shipping charges of returned products to Aquatic AV.
Priority Customer Support & Free Extended Warranty
In order to receive the best customer support from Aquatic AV we recommend you register your
product for a free extended warranty.
Register your product for extended warranty and priority support at www.aquaticav.com/register
Please record the model and serial number[s] of your equipment in the space provided below as
your permanent record and will assist us with your factory warranty coverage. These numbers can
be found on the front panel of the SWA6+ Combined Stereo Subwoofer.
Model number[s]: Serial number[s]:
Warranty Information Combined Stereo Subwoofer SWA6+
16www.aquaticav.com

Product design and specification subject to change without notice. E&OE.
Doc V1.1
FCC ID:
MADE IN CHINA
FCC Statement to the User
This equipment has been tested and found to comply with the limits for a Class B digital
device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide
reasonable protection against harmful interference in a residential installation. This
equipment generates, uses and can radiate radio frequency energy and, if not installed
and used in accordance with the instructions, may cause harmful interference to radio
communications. However, there is no guarantee that interference will not occur in a
particular installation. If this equipment does cause harmful interference to radio or
television reception, which can be determined by turning the equipment off and on, the
user is encouraged to try to correct the interference by one of the following measures:
1. Reorient or relocate the receiving antenna.
2. Connect the equipment into an outlet on a circuit different from that to which the
receiver is connected.
3. Increase the separation between the equipment and receiver.
4. Consult the dealer or an experienced radio/TV technician for help.
FCC Caution:
Any changes or modifications not expressly approved by the party responsible for
compliance could void the user’s authority to operate this equipment.
This device complies with Part 15 of the FCC Rules. Operation is subject to the following
two conditions: (1) This device may not cause harmful interference, and (2) this device
must accept any interference received, including interference that may cause undesired
operation
FCC Statement Combined Stereo Subwoofer SWA6+
17www.aquaticav.com

E-mail: [e-mail]
US & Canada: 1 877 579 2782
International: [phone]
Fax: [phone]
www.aquaticav.com
Aquatic AV
282 Kinney Drive
San Jose, CA 95112, USA