AquaticLife 420309 Operating and safety instructions

Software Download: By clicking Download Now you acknowledge and agree to the Aquatic
Life Software Licensing Agreement
Instructions: Download the file at the link above and save on your computer > Click the saved
file to open > When the File Download dialog box appears, click Run > When the User
Account Control dialog box appears, click Yes. Please note, depending on your settings, you
may need to temporarily disable your antivirus software.

www.aquaticlife.com
XS UV REEF LED FIXTURES
Item # Product Description
420309 14" XS UV x 25 LED, 91W
420310 34" XS UV x 50 LED, 164W
420311 46" XS UV x 75 LED, 246W
Installation & Maintenance Guide
XS UV REEF LED FIXTURES
XS UV REEF LED FIXTURES
NEAR
UV!

2
WELCOME & TABLE OF CONTENTS
Safety Instructions.............................................................3
Warnings ........................................................................ 3
Parts & Specifications ........................................................4
Parts Diagram ................................................................ 4
Product Specifications...................................................... 4
Installation .....................................................................5-9
Computer Requirements................................................... 5
Software Installation .................................................... 5 - 7
Power ............................................................................ 8
USB Connection .............................................................. 8
Operation .....................................................................9-22
Fixture Display and Remote ............................................... 9
Using T-Time Software.................................................... 10
Main Menu........................................................... 11
Color Dashboard .............................................. 11 -13
Auto Dashboard ............................................... 13 -15
Functions Dashboard......................................... 16 -18
General Dashboard ............................................... 19
Using the Remote Control............................................... 20
Suspension System ....................................................... 21
Aquarium Frame Mounts ................................................ 22
Fixture Placement & Adjustment...................................... 22
Acclimating Corals ..........................................................23
Maintenance ....................................................................23
Warranty ........................................................................24
Appendix A - Verify and Install .NET Framework Windows XP.......25-26
Appendix B - Verify and Install .NET Framework Windows Vista ....27-29
Appendix C - Creating a 24 Hour light cycle “Trace”..................30-34
Appendix D - LED Layout & Lenses..........................................35
Appendix E - Fixture Selection Guide .......................................36
This symbol indicates “WARNINGS”
that are essential in order to protect
against injury to people or damage to
equipment.
This symbol indicates “NOTES”that
are specific instructions on how to
operate, control, adjust or maintain
the units.
This symbol indicates “TIPS” that are
intended to offer helpful advice for a
better user experience.
Thank you for purchasing an AquaticLife®
Light Fixture for use with your aquarium!
We know you value quality and innovation and will be pleased with this product’s performance.
We encourage you to take a few minutes to become familiar with this manual and note items that
apply to your particular model. Select parts and accessories can be purchased direct from
Aquatic Life for customizing your fixture.
For additional information, please visit www.aquaticlife.com.
1) Install Software before connecting Light Fixture to Computer.
2) Follow set-up instructions step-by-step.
Copyright © Aquatic Life, LLC
All rights reserved.
No part of this document may be reproduced,
stored in a retrieval system, or transmitted in
any form or by any means without the prior
written consent of Aquatic Life, LLC.
Aquatic Life, LLC
Commerce, CA 90040
Toll-Free US only: [phone]
Outside the US: 1-818-768-6943
[email protected]
Check us out on...
TABLE OF CONTENTS
WELCOME!
IMPORTANT:

3
SAFETY INSTRUCTIONS
A) READ AND FOLLOW ALL SAFETY INSTRUCTIONS.
B) DANGER – To avoid possible electric shock, special care should be taken since water is employed
in the use of aquarium equipment. For each of the following situations, do not attempt repairs by
yourself; return the appliance to an authorized service facility for service or discard the appliance:
1) If the appliance falls into the water, DON’T reach for it! First unplug it and then retrieve it.
If electrical components of the appliance get wet, unplug the appliance immediately. (Non-
immersible equipment only)
2) If the appliance shows any sign of abnormal water leakage, immediately unplug it from the
power source. (Immersible equipment only)
3) Carefully examine the appliance after installation. It should not be plugged in if there is water on
parts not intended to be wet.
4) Do not operate any appliance if it has a damaged cord or plug, or if it is malfunctioning or has
been dropped or damaged in any manner.
5) To avoid the possibility of the appliance plug or receptacle getting wet, position aquarium stand
and tank to one side of a wall-mounted receptacle to prevent water from dripping onto the
receptacle or plug. A “drip loop," shown in the figure below, should be arranged by the user
for each cord connecting an aquarium appliance to a receptacle. The “drip loop" is that part
of the cord below the level of the receptacle, or the connector if an extension cord is used, to
prevent water traveling along the cord and coming in contact with the receptacle. If the plug
or receptacle does get wet, DON’T unplug the cord. Disconnect the fuse or circuit breaker
that supplies power to the appliance. Then, unplug and examine for presence of water in the
receptacle.
C) Close supervision is necessary when any appliance is used by or near children.
D) To avoid injury, do not contact moving parts or hot parts such as heaters, reflectors, lamp bulbs, and
the like.
E) Always unplug an appliance from an outlet when not in use, before putting on or taking off parts,
and before cleaning. Never yank the cord to pull the plug from outlet. Grasp the plug and pull to
disconnect.
F) Do not use an appliance for other than intended use. The use of attachments not recommended or
sold by the appliance manufacturer may cause an unsafe condition.
G) Do not install or store the appliance where it will be exposed to the weather or to temperatures below
freezing.
H) Make sure an appliance mounted on a tank is securely installed before operating it.
I) Read and observe all the important notices on the appliance.
J) If an extension cord is necessary, a cord with a proper rating should be used. A cord rated for less
amperes or watts than the appliance rating may overheat. Care should be taken to arrange the cord
so that it will not be tripped over or pulled.
K) For added safety, the appliance must be plugged into a receptacle controlled by a GFCI (ground
fault interrupter) circuit breaker. The device must be properly connected to a grounded three-prong
receptacle.
L) This appliance is intended FOR HOUSEHOLD USE ONLY.
M) This Light Fixture is required to be used over a covered aquarium. A glass top or protective barrier is
required to minimize the fixture's exposure to water.
N) SAVE THESE INSTRUCTIONS
WARNING
TO GUARD AGAINST INJURY, BASIC
PRECAUTIONS SHOULD BE OBSERVED,
INCLUDING THE FOLLOWING:

4
3W LED LIGHT FIXTURES PARTS / SPECS
PARTS DIAGRAM
Product Specifications
14 in (420309) 34 in (420310) 46 in (420311)
Lens Cover Acrylic 9000537 9000535 9000536
End Plate Exp LED 3W (universal) 9000594 9000594 9000594
End Plate Blue Accent LED 3W (universal) 9000595 9000595 9000595
Screws LED 3W End Plate/Accent Plate (14 PK) 9000596 9000596 9000596
Suspension Hardware 470281 (Included) 470281 (Optional) 470281 (Optional)
Reflector LED 100 Deg (6 PK) XPG 9000573 9000573 9000573
Reflector LED 80 Deg (6 PK) XPE 9000574 9000574 9000574
Power Supply (complete w/switch & disconnect) 9000525 470129 470129
9USB A Male to USB Mini Cable (3 meters) (not pictured) 9000531 9000531 9000531
10 Remote 9000587 9000587 9000587
Aquarium Frame Mounts 470262 (Optional) 470262 (Included) 470262 (Included)
XS UV LED Board 470312 470312 470312
Optional Reflector LED 60 Deg (6 PK) XPE (not pictured) 9000575 9000575 9000575
14 in (420309) 34 in (420310) 46 in (420311)
Rated Voltage: 115/230V 115/230V 115/230V
Rated Cycle: 50-60Hz 50-60Hz 50-60Hz
Power Cord: 1.8 Meter 1.8 Meter 1.8 Meter
Fixture Cord: 3 Meters 3 Meters 3 Meters
USB Connection: 3 Meters 3 Meters 3 Meters
8
7
6
11
12
5
4
3
2
1
Parts List
8
4
5
4
2
3
2
3
1
11
10
6 & 7
12
Included with
14" fixture.
Optional for
34" and 46"
fixtures.
Included with
34" and 46"
fixtures.
Optional for
14" fixture.

5
3W LED LIGHT FIXTURES INSTALLATION
REQUIREMENTS:
Computer Type:
• PC (Mac is not supported at this time)
Operating System:
• Windows XP (Service Pack 3 installed)
• Windows Vista
• Windows 7v
• Windows 8
Internet Browsers:
• Microsoft Internet Explorer 8 or 9 (IE8 or IE9)
• Safari 5
COMPUTER REQUIREMENTS
SOFTWARE INSTALLATION
Your new Aquatic Life 3W LED Light Fixture includes electronic components that can be programmed to
control the LED’s. This fixture was assembled in California and pre-programmed with three lighting cycles
and 18 preset colors. The software designed to customize your fixture is available for download from the
Aquatic Life website www.aquaticlife.com. At a minimum, it is necessary to install the software on your
computer to set the time on the light fixture for proper operation. It is important to follow the set-up
procedures step-by-step to ensure your fixture connects properly to the software.
WARNING
WARNING DO NOT CONNECT
THE LIGHT FIXTURE TO
THE COMPUTER UNTIL THE
SOFTWARE IS INSTALLED.
NOTE: .NET (pronounced
“dot net”) is a programming
framework created by Microsoft
that developers can use to
create applications more easily.
If you are running Windows
XP or Windows Vista, the .NET
framework is needed to use
the Aquatic Life software to
program your LED Light Fixture.
PC required to operate fi xture
1) If you are running Windows XP, it is necessary to have Microsoft .NET Framework 2.0 Service
Pack 1 or 2 (x86) installed on your computer. If you are running Windows Vista, you will need. NET
Framework 3.5 Service Pack 1. If you have Windows Update turned on, there is a good chance your
computer already has the .NET component installed, but it is important to verify.
2) Windows XP Users – See Appendix A (page 25) for instructions on how to verify you have the cor-
rect .NET Framework installed and if not, how to install. Proceed to Step 3.
Windows Vista Users – See Appendix B (page 27) for instructions on how to verify you have the
correct .NET Framework installed and if not, how to install. Proceed to Step 3.
Windows 7 & Windows 8 Users – Proceed to Step 3.
3) With your computer connected to the internet, go to www.aquaticlife.com and find your light fixture
under the “+Products” menu at the top of the website.
4) Select Software Download.

6
3W LED LIGHT FIXTURES INSTALLATION
On the Software Download Center webpage, you will be asked to register your Aquatic Life light
fixture. You will need the unique nine digit serial number associated with your fixture to register the
fixture and obtain the “Key” needed to download the software. The serial number is located on the back
of the light fixture and contains nine digits.
After you complete the needed registration information, select the “Request Key” button and follow the
instructions on the website.
When prompted, select “Save File”.
Double-click on the program and select “Run”.
Run the set-up wizard.
SOFTWARE INSTALLATION (CONTINUED)

7
3W LED LIGHT FIXTURES INSTALLATION
SOFTWARE INSTALLATION (CONTINUED)
6) When the software has finished installing, click finish.
5) Click Next.
NOTE: As part of the software
installation, a USB Driver is
installed on your computer to
allow the Aquatic Life Light
Fixture to communicate with the
computer.

8
3W LED LIGHT FIXTURES INSTALLATION
POWER
USB CONNECTION
The Aquatic Life 3W LED Light Fixture is powered by a remote Power Supply. The cUL Approved Power
Supply will work with 110V and 220V with no extra adapters or switches.
1) Plug the cord connected to the power supply
into the back of the Light Fixture and secure by
turning the outer ring on the cord in a clockwise
direction until snug.
2) Connect the female end of the power cord into
the Power Supply and then the standard plug
side into a grounded outlet (GFCI). Rock the
power switch on the Power Supply.
1) Remove the protective cap from the USB port
on the back of the fixture. The cap is attached
to the fixture and should not be removed from
the fixture.
2) Use the included USB mini to USB A male wire
to connect the fixture to the PC computer.
TIP: The cord is “KEYED” and
can be placed into the fixture
only one way.
WARNING: DO NOT attach
the fixture to the computer
if you have not installed the
software. If attached prior to
software installation, the fixture
may need to be shipped back to
Aquatic Life for repair.
WARNING: Do NOT leave the
USB cable connected to the
computer when not in use. Use
the included protective cap to
cover the USB connection on
the back of the Light Fixture
to prevent damage from water
and salt.
TIP: USB Cables are capable
of transmitting quality data
over a maximum of sixteen
feet of cable. To ensure
proper operation, Aquatic Life
recommends using the cable
provided or installing a Wireless
USB Adapter.

9
3W LED LIGHT FIXTURES OPERATION
FIXTURE DISPLAY AND REMOTE
The Remote is powered by one 3V Lithium Battery
(CR2025). To use the Remote for the first time,
install the battery and the contacts inside the
Remote. The battery life depends on the usage.
When using the Remote, always point it toward the
front of the Light Fixture. The Infrared Sensor is
located on the front of the Light Fixture between
the Power and Lunar LED indicators.
Power ON/OFF
Auto Mode Power Adjustment
Demonstrate the existing Auto Selection
Color Mode Selection
Auto Mode Trace Selection
Lunar Mode ON/OFF
Cloud Mode ON/OFF
Storm Mode ON/OFF
+
CR2025
3V
Power Lunar Cloud Storm
24-hour Individual
Light Programs