Aranet PRO User manual

Quick Start
Guide
Aranet PRO

Aranet System
Quick Start Guide

Table of Contents
2.
To successfully set-up the Aranet ecosystem all steps has to be followed
in order provided in table of content.
Connect Base station to the internet
Pairing a sensor
Create Aranet Cloud account
Connect Base station to the Cloud
Access Cloud data outside Aranet ecosystem
........................................................ 3.
....................................................................................... 4.
................................................................... 6.
........................................................... 6.
......................................... 7.

WiFi SSID:
WiFi IP: 192.168.206.100
Username:
Password:
root
FhTdwPN7fg
Aranet-C20a47
PRO Plus base station
S/N:
M/N:TDSBOA03
371010004641
www.aranet.com
Made in Latvia, EU
ETH IP:
C493003034E4ETH MAC:
192.168.205.100
IEEE 802.3af PoE
Connect Base station to the internet
Unpack and plug the Base station in using APOE injector or B PoE enabled
network switch.
1. In about 30 seconds, the Wi-Fi LED will turn on indicating the Base station
is ready to be connected to.
2. Connect to the Base station WiFi SSID in your network settings by etering
the password provided on the label of base station. Then type WiFi IP in your
browser and log in with Username & Password.
PRO Plus base station
S/N:
M/N:TDSBOA03
371010004641
www.aranet.com
Made in Latvia, EU
WiFi SSID:
WiFi IP: 192.168.206.100
ETH IP:
C493003034E4ETH MAC:
Username:
Password:
192.168.205.100
root
FhTdwPN7fg
Aranet-C20a47
IEEE 802.3af PoE
PRO Plus base station
S/N:
M/N:TDSBOA03
371010004641
www.aranet.com
Made in Latvia, EU
WiFi SSID:
WiFi IP: 192.168.206.100
ETH IP:
C493003034E4ETH MAC:
Username:
Password:
192.168.205.100
root
FhTdwPN7fg
Aranet-C20a47
IEEE 802.3af PoE
PoE-enabled
network switch
PoE injector
A
1.
2.
B
IN OUT
30 sec
12V
POWER FROM BATTERY
OFF ON
TCP cable TCP cable
Network
switch
3.

Pairing a sensor
! Important – The pairing of a sensor to a Base station is done with
lower transmit power – you must keep them 20 m apart at most.
The pairing procedure is as follows:
1. Open the sensor cover and remove the battery if it has been already
inserted.
IMPORTANT
2. In the user interface of the base station accessed through WiFi-IP in a web
browser, go to Sensors.
AA
4.

Choose the measurement interval, then click PAIR SENSOR
6. Attach the battery cover back on the
sensor. To start customize the sensor
click on the interface to STOP Pairing.
Now sensor option customization is
available.
5. Newly paired sensors, marked
by green triangle, are shown in
the base station browser menu.
3. The 2 min timer indicates the
window to insert the battery in the
sensor. Correct battery type for
each sensor is indicated in its
datasheet.
M/N:TDSPRMU1
FCC ID: W9Z-ARANETRM
IC:8855A-ARANETRM
2 min PAIRED NOT PAIRED
AA
4. Successful pairing is confirmed by
one short and one long LED light flash
and takes up to 30 seconds. Failed
pairing is indicated by three short
flashes.
5.

1. Go to aranet.cloud webpage
and register.
2. Activate your account via link
in confirmation email.
3. Log in and setup a company
account and insert the billing
information if needed.
4. Copy the registration code for
the next step.
Create Aranet Cloud account
Connect Base station to the Cloud
1. Connect to the Base station via browser and WiFi SSID address.
2. Go to Aranet Cloud menu in the Base station side panel.
6.

3. Enter your email and the
registration code from the previous
step. Return to your Cloud account.
4. Within a few minutes, sensor
readings will appear including the
data stored in the Base station and
your Aranet system is ready for use!
Access Cloud data outside
Aranet ecosystem
Using a Cloud API, the sensor and Cloud data can be integrated with any other
web or cloud-based IT system, or 3rd party applications. To create API key:
1. Login the admin Aranet Cloud under account that has permission to edit
Integrations.
2. Go to Settings and select API tab and click NEW API KEY
7.

3. Enter API account name, description, expiration date if desirable, etc. Click
CREATE
4. Click on the new key to see its details – it is now ready to be used or further
edited if needed.
API key can be used in Aranet partners’ software solution to take full
advantage of the wireless sensing ecosystem.
See Aranet partners with whom the API key can be used:
www.aranet.com/aranet-software-partners
THE SPECIFICATIONS OR INFORMATION CONTAINED IN THIS DOCUMENT ARE SUBJECT TO CHANGE WITHOUT
NOTICE DUE TO CONTINUING INTRODUCTION OF DESIGN IMPROVEMENTS. IF THERE IS ANY CONFLICT
BETWEEN THIS DOCUMENT AND COMPLIANCE STATEMENTS, THE LATTER WILL SUPERSEDE THIS DOCUMENT.
FOR MORE DETAILED INFORMATION ABOUT ARANET PRODUCTS, PLEASE VISIT ARANET.COM, CONTACT YOUR
ARANET REPRESENTATIVE, OR WRITE TO [email protected]. PRODUCT SPECIFICATIONS ARE SUBJECT TO
CHANGE WITHOUT PRIOR NOTICE.
© 2017 - 2023 SAF TEHNIKA, JSC. ALL RIGHTS RESERVED.