Aeotec Siren Gen5 User manual

Intin Manual ENG
Aeotec Siren Gen5
No longer just a smart home. Now you own a safe home. Siren takes the best smart home
technology and uses it to help you build a safe home. Most smart home systems have a
safety flaw: in an emergency they send your smartphone a push notification. That means that
your safety, and your family’s safety, depends on everyone having a smartphone, and on
those smartphones being turned on, and on the push notification being heard and read. In
other words, your family’s safety depends on a lot of things going right just when a lot of
things are going wrong.
Siren is better than that. When an emergency is happening it lets you know. Its 105 dB
Speaker System is always heard. Its super-bright LED system lights your path even when it’s
dark. Its b ackup battery means that Siren keeps on working even when your power is out or
has been purposefully cut. Siren provides a smart home with the perfect security and safety
features that it needs. Those security and safety features are matched by smart features.
Siren’s speaker system can access 5 different audio alerts, allowing your smart home to pick
the alert best suited to the emergency. The speaker system’s volume can also be adjusted so
that Siren is perfect for every space in every home. Best of all, Siren is simple to install. Plug
Siren in, sync it to your smart home, and then enjoy the peace of mind that comes with
knowing that your smart home is now a safe home.

Intin Manual ENG
Familiarise yourself with your siren gen5
•Action Button
•105 dB speaker
system
•Safety LED
•Network LED
Quickstart
Getting your Siren up and running is as simple as plugging it into a wall socket and linking it
to your existing Z-Wave network. The following instructions tell you how to link your Siren to
your Z-Wave network using Aeotec by Aeon Labs’ Z-Stick or Minimote controllers. If you are
using other products as your main Z-Wave controller, such as a Z-Wave gateway, please refer
to the part of their respective manual that tells you how add new devices to your network.

Intin Manual ENG
If you're using a Z-Stick:
1. Decide on where you want your Siren to be placed and plug it in to a wall outlet. Its
Network LED will begin to blink for 3 seconds when you short press and quickly
release the Action Button.
2. If your Z-Stick is plugged into a gateway or a computer, unplug it.
3. Take your Z-Stick to your Siren.
4. Press the Action Button on your Z-Stick.
5. If Siren has been successfully linked to your Z-Wave network its Network LED will no
longer blink when you short press and quickly release the Action button on Siren. If
the linking was unsuccessful and the Network LED continues to blink when you short
press and quickly release the Action button, repeat the above steps. Press the Action
Button on the Z-Stick to take it out of installationmode and return it to your gateway
or computer.
If you’re using a Minimote:
1. Decide on where you want your Siren to be placed and plug it in to a wall socket. Its
Network LED will begin to blink for 3 seconds when you short press and quickly
release the Action Button.
2. Take your Minimote to your Siren.

Intin Manual ENG
3. Press the Include button on your Minimote.
4. If Siren has been successfully linked to your Z-Wave network, its Network LED will no
longer blink when you short press and quickly release the Action Button on Siren. If
the linking was unsuccessful and the Network LED continues to blink when you short
press and quickly release the Action Button repeat the above steps.
5. Press any button on your Minimote to take it out of installation mode.
With your Siren now working as a part of your smart home, you’ll be able to configure it from
your home control software. Please refer to your software’s user guide for precise instructions
on configuring Siren to your needs. You’re able to test your Siren’s speaker system manually.
Please note that the speaker system is 105 dB and very loud –we recommend only testing
your Siren while wearing the necessary ear protection given you’ll need to be next to your
Siren while manually testing it. To manually test Siren, press and hold the Action Button for 5
seconds.
Associating different tones with different events.
Your Siren contains 5 different alert tones, and each can be set to be used for a different type
of emergency. One tone is more relevant to intruder alerts, while others are more relevant to
the likes of water leaks, medical emergencies and door chimes. This functionality can be
setup and configured via supporting Z-Wave gateways. Please refer to your gateway's user
manual for further information.
Removing your Siren Gen5 from a Z-Wave Network
Your Siren can be removed from your Z-Wave network at any time. You’ll need to use your Z-
Wave network’s main controller to do this and the following instructions tell you how to do
this using Aeotec by Aeon Labs’ Z-Stick and Minimote controllers. If you are using other
products as your main Z-Wave controller, please refer to the part of their respective manuals
that tells you how remove devices from your network.

Intin Manual ENG
If you're using a Z-Stick:
1. If your Z-Stick is plugged into a gateway or a computer, unplug it.
2. Take your Z-Stick to your Siren.
3. Press the Action Button on your Z-Stick.
4. Press the Action Button on your Siren.
5. If your Siren has been successfully removed from your network, its Network LED will
blink for 3 seconds when you short press and quickly release your Siren’s Action
Button. If the removal was unsuccessful, the Network LED will not blink.
6. Press the Action Button on the Z-Stick to take it out of removal mode.
If you’re using a Minimote:
1. Take your Minimote to your Siren.
2. Press the Remove Button on your Minimote.
3. Press the Action Button on your Siren.
4. If your Siren has been successfully removed from your network, its Network LED will
blink for 3 seconds when you short press and quickly release your Siren’s Action
Button. If the removal was unsuccessful, the Network LED will not blink.
5. Press any button on your Minimote to take it out of removal mode.

Intin Manual ENG
Resetting your Siren Gen5
At some stage, you may wish to reset all of your Siren’s settings to their factory defaults. To
do this, press and hold the Action Button for 20 seconds and then release it. Your Siren will
now be reset to its original settings, and the speaker system will sound for 3 seconds as a
confirmation.
Technical Specifications
Model number: ZW080
Built-in Lithium Battery: 430 mAh.
Alarm Power: 1.7W.
Max Standby Power: 0.7W.
Max Volume: 105 dB, reduced in battery powered mode.
Operating Temperature: 0-45℃
Operating Distance: 170 metres outdoors.