
Operating the product
12 / 25EN Refrigerator / User Manual
CIf you press the quick cooling button
repeatedly with short intervals, the
electronic circuit protection will be
activated and the compressor will not
start up immediately.
CThis function is not recalled when
power restores after a power failure.
4. Fridge compartment temperature setting
button
Press this button to set the temperature of the fridge
compartment to 8, 7,6, 5,4,3, 2, 8... respectively.
Press this button to set the fridge compartment
temperature to the desired value. ( )
5.Vacation Function
In order to activate vacation function, press the this
button ( ) for 3 seconds, and the vacation mode
indicator ( ) will be activated. When the vacation
function is activated, “- -” is displayed on the fridge
compartment temperature indicator and no active
cooling is performed on the fridge compartment.
It is not suitable to keep the food in the fridge
compartment when this function is activated. Other
compartments shall be continued to be cooled as
per their set temperature.
To cancel this function press Vacation function
button again.
6. Termination of the High Temperature
Warning
In case of power failure/high temperature warning,
you may delete the warning ( ) by pressing any
button on the indicator or high temperature alarm
off button for 1 second after checking the food
inside the freezer compartment.
Note: Cancelling by pressing any button is not
applicable for every model.
7. Key lock
Press key lock button ( ) simultaneously for 3
seconds. Key lock symbol ( ) will light up and key
lock mode will be activated. Buttons will not function
if the Key lock mode is active. Press key lock button
simultaneously for 3 seconds again. Key lock symbol
will turn off and the key lock mode will be exited.
Press the key lock button if you want to prevent
changing of the temperature setting of the
refrigerator ( ).
8. Eco fuzzy
Press and hold eco fuzzy button for 1 seconds to
activate eco fuzzy function. Refrigerator will start
operating in the most economic mode at least 6
hours later and the economic usage indicator will
turn on when the function is active ( ). Press
and hold eco fuzzy function button for 3 seconds to
deactivate eco fuzzy function.
This indicator is illuminated after 6 hours when eco
fuzzy is activated.
9. Freezer compartment temperature setting
button
Press this button to set the temperature of the
freezer compartment to -18,-19,-20,-21, -22, -23,-
24, -18... respectively. Press this button to set the
freezer compartment temperature to the desired
value.( )
10. Icematic off indicator
Indicates whether the icematic is on or off. ( )
If On, then the icematic is not operating. To operate
the icematic again press and hold the On-Off button
for 3 seconds.
CWater flow from water tank will
stop when this function is selected.
However, ice made previously can be
taken from the icematic.
11. Quick freeze function button/ icematic
on-off button
Press this button to activate or deactivate the quick
freezing function. When you activate the function,
the freezer compartment will be cooled to a
temperature lower than the set value. ( )
To turn on and off the icematic press and hold it for
3 seconds.