Archers Sleepcentre BT240 User manual

BT240
40min
Thank you for choosing this furniture.
PLEASE RETAIN PAC AGING UNTIL YOU HAVE COMPLETED ASSEMBLY.
Informa*on about your furniture.
Our furniture ranges have been carefully craed from solid wood and natural wood veneers. Each piece of furniture has unique
characteriscs such as knots variances and graniing. These are part of the natural character of the furniture itself.
Caring fror your furniture.
Extreme temperature can cause slight movements in the wood itself so please avoid placing your furniture close to radiators or other direct
sources of heat. Humidity should also be avoided. Please avoid exposing your furniture to connued bright sunlight as it can a%ect the colour.
Any 'uid should be removed as quickly as possible. Always li your furniture when moving as dragging can cause damage to your furniture or
'ooring. Extreme changes in temperature & humidity during transit may result in a powder residue forming so silica gel bags have been included
to alleviate this natural occurrence. This residue is harmless and can easily be removed before assembly with a damp cloth and mild detergent.
A,er care.
Wipe the surfaces with a dry cloth and an occasional use of normal household polish. We also recommend you use household spray
polish occasionally on the drawer grooves and runners as this will aid use. Please do not use detergents or chemicals on your furniture.
PARTS LIST
A = x16
Dowel
B = x8
40mm Screw
C = x16
15mm Screw
D = x8
Nail
E = x1
Top Holder
F = x2
Hinges
BEFORE YOU START ASSEMBLY
Please check that you have all the correct parts and *+ngs as detailed on the assembly instrucons.
FOR DAMAGED/REPLACEMENT PARTS
Batch Number:
PLEASE RETAIN THIS LEAFLET ALONG WITH YOUR DELIVERY NOTE/RECEIPT FOR FUTURE REFERENCE
BEFORE YOU START ASSEMBLY please store the carton at room temperature for 48 hours or more so the contents can acclimase.
Please visit www.coreproducts.co.uk/parts

1
A = x16
Dowel
2
B = x4
40mm Screw
3

4
B = x4
40mm Screw
5
D = x8
Nail
6
F = x2
Hinges
E = x1
Top Holder
C = x16
15mm Screw