Arcisan Neion Plus User manual

Neion Plus Intelligent Toilet
Instruction Manual
NE041200
NE043200

Thank you for purchasing our Neion Plus Intelligent toilet.
Please read the instructions and related illustrations
carefully before installing and using the Nieon Plus
Intelligent toilet.
There may be some minor differences between actual
product and illustrations.
A warranty card is included in this manual, please keep it in
a safe place for future reference.
If you have any queries about the correct use of this
product, please contact us.

02
02
03
03
08
12
03
04
05
08
09
10
10
11
12
14
15
16
24
25
32
36
25
25
26
27
29
30
30
31
03

Do not ignore! Danger of serious injury.
Do not ignore. Danger of peronal injury or property damage.
The symbols and their meaning are as follows:

Main usage
Safety requirements
Installation requirements
To ensure that you enjoy our Neion Plus intelligent toilet，please read all
the instructions carefully. Please keep this instruction manual in a safe
place. lf the product needs to be transferred to others, please be sure to
include this instruction manual. All instructions have been confirmed in
accordance with the latest technical status of the equipment at the time of
printing delivery. We reserve the right to make changes as a result of
further development.

before moving
3/8

Do not subject the battery to extreme conditions: ie. in contact with heat or
exposure to the sun. Otherwise, leakage may occur.
Do not short the positive and negative terminals of the remote control.
Do not block the drying outlet with your hand or other items.
Do not install in areas with high humiditiy or where can be
damaged by water. Do not spill water or detergent on the product.
Immersion in water. Do not spray water or detergent
on the product.
lt may cause damage, fire, or electric shock.
Do not use the following items to clean the product:
Gasoline, benzene, paint thinner, or nylon brush.
Any signs of fumes
or
or

function

certified tradesperson

1.Open the stop tap and make sure the water is connected.

Power button
lf code matching is unsuccessful, the indicator will automatically turn off
after 30 seconds. Try again as described above. lf stil unsuccessful,
please consult with a qualified person.

does not beep

Press the knob to
activate the drying
function.
1. To increase air
temperature, rotate
knob forward. Each of
the five levels will be
indicated by a short
beep. There is two
beeps when the
maximum position is
reached.
When seated, rotate
the knob backwards to
activate rear wash
function.
1. There is a short beep
when the function is
turned on. After 3mins,
there is another short
beep indicating the
function is now off.
2. To increase water
flow, rotate knob
forward. Each of the
four flow levels will be
indicated by a short
beep.
When seated, rotate
the knob backwards to
activate female wash
function.
1. There is a short beep
when the function is
turned on. After 3mins,
there is another short
beep indicating the
function is now off.
2. To increase water
flow, rotate knob
forward. Each of the
four flow levels will be
indicated by a short
beep.

3. To decrease air
temperature, rotate
knob backwards. Each
of the five levels will be
indicated by a short
beep. There is two
beeps when the
minimum position is
reached.
Press knob to stop the
drying function.
There are two beeps
when the maximum
position is reached.
3. To decrease water
flow, rotate knob
backward. Each of the
four flow levels will be
indicated by a short
beep. There is two
beeps when the
minimum position is
reached.
Press knob to stop rear
wash function.
There is two beeps
when the maximum
position is reached.
3. To decrease water
flow, rotate knob
backward. Each of the
four flow levels will be
indicated by a short
beep. There is two
beeps when the
minimum position is
reached.
Press knob to stop
female wash function.

key